Job strain as a risk factor for coronary heart disease:a collaborative meta-analysis of individual participant data

BACKGROUND: Published work assessing psychosocial stress (job strain) as a risk factor for coronary heart disease is inconsistent and subject to publication bias and reverse causation bias. We analysed the relation between job strain and coronary heart disease with a meta-analysis of published and unpublished studies. METHODS: We used individual records from 13 European cohort studies (1985-2006) of men and women without coronary heart disease who were employed at time of baseline assessment. We measured job strain with questions from validated job-content and demand-control questionnaires. We extracted data in two stages such that acquisition and harmonisation of job strain measure and covariables occurred before linkage to records for coronary heart disease. We defined incident coronary heart disease as the first non-fatal myocardial infarction or coronary death. FINDINGS: 30?214 (15%) of 197?473 participants reported job strain. In 1·49 million person-years at risk (mean follow-up 7·5 years [SD 1·7]), we recorded 2358 events of incident coronary heart disease. After adjustment for sex and age, the hazard ratio for job strain versus no job strain was 1·23 (95% CI 1·10-1·37). This effect estimate was higher in published (1·43, 1·15-1·77) than unpublished (1·16, 1·02-1·32) studies. Hazard ratios were likewise raised in analyses addressing reverse causality by exclusion of events of coronary heart disease that occurred in the first 3 years (1·31, 1·15-1·48) and 5 years (1·30, 1·13-1·50) of follow-up. We noted an association between job strain and coronary heart disease for sex, age groups, socioeconomic strata, and region, and after adjustments for socioeconomic status, and lifestyle and conventional risk factors. The population attributable risk for job strain was 3·4%. INTERPRETATION: Our findings suggest that prevention of workplace stress might decrease disease incidence; however, this strategy would have a much smaller effect than would tackling of standard risk factors, such as smoking. FUNDING: Finnish Work Environment Fund, the Academy of Finland, the Swedish Research Council for Working Life and Social Research, the German Social Accident Insurance, the Danish National Research Centre for the Working Environment, the BUPA Foundation, the Ministry of Social Affairs and Employment, the Medical Research Council, the Wellcome Trust, and the US National Institutes of Health.

Income, deprivation, and economic strain. An analysis of the European community household panel

This paper is concerned with the relationship between household income and life-style deprivation, and their combined impact on households' perceptions of economic strain. It takes as a point of departure findings from a number of European countries showing that the relationship between income and deprivation is weaker than widely assumed and that relative income poverty lines may perform poorly in terms of identifying the most deprived households. It proceeds to examine how far these conclusions about income and deprivation can be generalized to the countries included in the first wave of the European Community Household Panel. Results show that five distinct dimensions of deprivation emerge from an overall European analysis and that these are consistent across individual countries. While a good deal of similarity is observed in the income-deprivation relationship, countries differ in the strength of relationship between income and what is termed 'current liferstyle deprivation' with the relationship being generally weakest in the richer countries. The implications of these findings for the use of relative income poverty lines are developed. Extending this analysis to an assessment of how income and deprivation combine to influence perceptions of economic strain, we show that within-nation reference group processes operating in a uniform manner across countries can account for the bulk of the variation in strain. Cross-national differences can be accounted for by corresponding variation in income and deprivation levels.

Gender differences among Canadian spousal caregivers at the end of life

The purpose of this study was to examine gender differences in spousal caregiving at the end of life. The primary research question was to determine gender differences in caregiver strain among spousal caregivers. Secondary research questions investigated included (i) the presence of gender differences among spousal caregivers in the duration of care provided; (ii) gender differences among spousal caregivers in formal service use and unmet service needs; and (iii) whether support to care recipients in activities of daily living varied according to the gender of the spousal caregiver. The study was conducted over a 2-year period (2000-2002) in south-central Ontario, Canada. The study sample included 283 informal spousal caregivers (198 females, 85 males) each of whom were caring for a terminally ill spouse at the time they participated in a cross-sectional telephone survey. The analysis showed that females reported a significantly greater level of caregiving strain than males (t = -2.12, d.f. = 281, P = 0.035). When considering source of support in activities of daily living for the care recipient, differential assistance was noted on the basis of caregiver gender. Female caregivers had almost twice the odds of providing support in toileting-related tasks than male caregivers (odds ratio (OR) = 1.98, 95% confidence interval (CI) = 1.01-3.85, P = 0.044), while male caregivers had approximately twice the odds of providing support in mobility-related tasks (OR = 0.41, 95% CI = 0.21-0.81, P = 0.011). Care recipients who had a female caregiver had lower odds of receiving support from family and friends in tasks associated with personal care (OR = 0.17, 95% CI = 0.05-0.53, P = 0.002). To address gender differences in caregiving, a realistic home-based palliative care approach must take into account the importance of informal caregivers. © 2008 Blackwell Publishing Ltd.

Stress processes in caring for an end-of-life family member:Application of a theoretical model

Objectives: Family caregivers play a vital role in maintaining the lives of individuals with advanced illness living in the community. However, the responsibility of caregiving for an end-of-life family member can have profound consequences on the psychological, physical and financial well-being of the caregiver. While the literature has identified caregiver stress or strain as a complex process with multiple contributing factors, few comprehensive studies exist. This study examined a wide range of theory-driven variables contributing to family caregiver stress. Method: Data variables from interviews with primary family caregivers were mapped onto the factors within the Stress Process Model theoretical framework. A hierarchical multiple linear regression analysis was used to determine the strongest predictors of caregiver strain as measured by a validated composite index, the Caregiver Strain Index. Results: The study included 132 family caregivers across south-central/western Ontario, Canada. About half of these caregivers experienced high strain, the extent of which was predicted by lower perceived program accessibility, lower functional social support, greater weekly amount of time caregivers committed to the care recipient, younger caregiver age and poorer caregiver self-perceived health. Conclusion: This study examined the influence of a multitude of factors in the Stress Process Model on family caregiver strain, finding stress to be a multidimensional construct. Perceived program accessibility was the strongest predictor of caregiver strain, more so than intensity of care, highlighting the importance of the availability of community resources to support the family caregiving role.

Caregiving at the end of life:perspectives from spousal caregivers and care recipients.

OBJECTIVE: The purpose of this study is to examine the perspectives of both the spousal caregiver and care recipient on the caregiving experience in home-based palliative care. METHODS: A qualitative research strategy involving home-based face-to-face interviews with older palliative care patients and their spousal caregivers was used to examine the caregiving experience. RESULTS: Ten spousal caregivers and care recipient dyads participated in the study. Most informal caregivers viewed caregiving as an extension of the family relationship where caregiving responsibilities evolved over time. Spousal caregivers identified many negative reactions to caregiving, such as fatigue or weariness, depression, anger and sadness, financial stresses, and lack of time. Care recipients acknowledged the emotional and financial strain and expressed concern for their spouses. Both caregivers and care recipients were appreciative of home care services although they identified the need for additional services. They also identified difficulties in communication with formal providers and poor coordination of care among the various services. Both caregivers and care recipients disclosed some challenges with informal supports, but on the whole felt that their presence was positive. Additional positive aspects of caregiving reported by spouses included strengthened relationship with their spouse and discovering emotional strength and physical abilities in managing care. SIGNIFICANCE OF RESULTS: Health care and social service professionals need to recognize and understand both caregiver and care recipient perspectives if they are to successfully meet the needs of both members of the dyad.

Fatigue behavior of laser-welded NiTi wires in small-strain cyclic bending

NiTi wires and their weldments are commonly used in micro-electro-mechanical systems (MEMS), and in such applications, cyclic loading are commonly encountered. In this paper, the bending-rotation fatigue (BRF) test was used to study the bending fatigue behavior of NiTi wire laser weldment in the small-strain regime. The fracture mechanism, which includes crack initiation, crack growth and propagation of the weldment in the BRF test, was investigated with the aid of SEM fractography and discussed in terms of the microstructure. It was found that crack initiation was primarily surface-condition dependent. The cracks were found to initiate at the surface defects at the weld zone (WZ) surface, and the crack propagation was assisted by the gas inclusions in the WZ. The weldment was finally fractured in a ductile manner. The fatigue life was found to decrease with increasing surface strain and also with increasing bending frequency (controlled by the rotational speed in the BRF test). In comparison, the fatigue life of the unwelded NiTi wires was higher than their welded counterparts at all strain levels and bending frequencies. The decrease in fatigue resistance of the weldment could be attributed to the surface and microstructural defects introduced during laser welding.

Is there a common water-activity limit for the three domains of life?

Archaea and Bacteria constitute a majority of life systems on Earth but have long been considered inferior to Eukarya in terms of solute tolerance. Whereas the most halophilic prokaryotes are known for an ability to multiply at saturated NaCl (water activity (a_w) 0.755) some xerophilic fungi can germinate, usually at high-sugar concentrations, at values as low as 0.650–0.605 a_w. Here, we present evidence that halophilic prokayotes can grow down to water activities of <0.755 for Halanaerobium lacusrosei (0.748), Halobacterium strain 004.1 (0.728), Halobacterium sp. NRC-1 and Halococcus morrhuae (0.717), Haloquadratum walsbyi (0.709), Halococcus salifodinae (0.693), Halobacterium noricense (0.687), Natrinema pallidum (0.681) and haloarchaeal strains GN-2 and GN-5 (0.635 a_w). Furthermore, extrapolation of growth curves (prone to giving conservative estimates) indicated theoretical minima down to 0.611 a_w for extreme, obligately halophilic Archaea and Bacteria. These were compared with minima for the most solute-tolerant Bacteria in high-sugar (or other non-saline) media (Mycobacterium spp., Tetragenococcus halophilus, Saccharibacter floricola, Staphylococcus aureus and so on) and eukaryotic microbes in saline (Wallemia spp., Basipetospora halophila, Dunaliella spp. and so on) and high-sugar substrates (for example, Xeromyces bisporus, Zygosaccharomyces rouxii, Aspergillus and Eurotium spp.). We also manipulated the balance of chaotropic and kosmotropic stressors for the extreme, xerophilic fungi Aspergillus penicilloides and X. bisporus and, via this approach, their established water-activity limits for mycelial growth (~0.65) were reduced to 0.640. Furthermore, extrapolations indicated theoretical limits of 0.632 and 0.636 a_w for A. penicilloides and X. bisporus, respectively. Collectively, these findings suggest that there is a common water-activity limit that is determined by physicochemical constraints for the three domains of life.

Development of a Bridge Weigh-in-Motion Sensor: Performance comparison using fibre optic and electric resistance strain sensor systems

This paper addresses the problems of effective in situ measurement of the real-time strain for bridge weigh in motion in reinforced concrete bridge structures through the use of optical fiber sensor systems. By undertaking a series of tests, coupled with dynamic loading, the performance of fiber Bragg grating-based sensor systems with various amplification techniques were investigated. In recent years, structural health monitoring (SHM) systems have been developed to monitor bridge deterioration, to assess load levels and hence extend bridge life and safety. Conventional SHM systems, based on measuring strain, can be used to improve knowledge of the bridge's capacity to resist loads but generally give no information on the causes of any increase in stresses. Therefore, it is necessary to find accurate sensors capable of capturing peak strains under dynamic load and suitable methods for attaching these strain sensors to existing and new bridge structures. Additionally, it is important to ensure accurate strain transfer between concrete and steel, adhesives layer, and strain sensor. The results show the benefits in the use of optical fiber networks under these circumstances and their ability to deliver data when conventional sensors cannot capture accurate strains and/or peak strains.