On the statistical memory architecture exploration and optimization

The worsening of process variations and the consequent increased spreads in circuit performance and consumed power hinder the satisfaction of the targeted budgets and lead to yield loss. Corner based design and adoption of design guardbands might limit the yield loss. However, in many cases such methods may not be able to capture the real effects which might be way better than the predicted ones leading to increasingly pessimistic designs. The situation is even more severe in memories which consist of substantially different individual building blocks, further complicating the accurate analysis of the impact of variations at the architecture level leaving many potential issues uncovered and opportunities unexploited. In this paper, we develop a framework for capturing non-trivial statistical interactions among all the components of a memory/cache. The developed tool is able to find the optimum memory/cache configuration under various constraints allowing the designers to make the right choices early in the design cycle and consequently improve performance, energy, and especially yield. Our, results indicate that the consideration of the architectural interactions between the memory components allow to relax the pessimistic access times that are predicted by existing techniques.

A primer for the Environmental Impact Assessment of mining at seafloor massive sulfide deposits

Seafloor massive sulfides (SMS) contain commercially viable quantities of high grade ores, making them attractive prospect sites for marine mining. SMS deposits may also contain hydrothermal vent ecosystems populated by high conservation value vent-endemic species. Responsible environmental management of these resources is best achieved by the adoption of a precautionary approach. Part of this precautionary approach involves the Environmental Impact Assessment (EIA) of exploration and exploitative activities at SMS deposits. The VentBase 2012 workshop provided a forum for stakeholders and scientists to discuss issues surrounding SMS exploration and exploitation. This forum recognised the requirement for a primer which would relate concepts underpinning EIA at SMS deposits. The purpose of this primer is to inform policy makers about EIA at SMS deposits in order to aid management decisions. The primer offers a basic introduction to SMS deposits and their associated ecology, and the basic requirements for EIA at SMS deposits; including initial data and information scoping, environmental survey, and ecological risk assessment. © 2013 Elsevier Ltd.

A Hybrid Swarm Based Approach in Addressing University Timetabling Problems

This paper is concerned with the application of an automated hybrid approach in addressing the university timetabling problem. The approach described is based on the nature-inspired artificial bee colony (ABC) algorithm. An ABC algorithm is a biologically-inspired optimization approach, which has been widely implemented in solving a range of optimization problems in recent years such as job shop scheduling and machine timetabling problems. Although the approach has proven to be robust across a range of problems, it is acknowledged within the literature that there currently exist a number of inefficiencies regarding the exploration and exploitation abilities. These inefficiencies can often lead to a slow convergence speed within the search process. Hence, this paper introduces a variant of the algorithm which utilizes a global best model inspired from particle swarm optimization to enhance the global exploration ability while hybridizing with the great deluge (GD) algorithm in order to improve the local exploitation ability. Using this approach, an effective balance between exploration and exploitation is attained. In addition, a traditional local search approach is incorporated within the GD algorithm with the aim of further enhancing the performance of the overall hybrid method. To evaluate the performance of the proposed approach, two diverse university timetabling datasets are investigated, i.e., Carter's examination timetabling and Socha course timetabling datasets. It should be noted that both problems have differing complexity and different solution landscapes. Experimental results demonstrate that the proposed method is capable of producing high quality solutions across both these benchmark problems, showing a good degree of generality in the approach. Moreover, the proposed method produces best results on some instances as compared with other approaches presented in the literature.

A Hybrid Imperialist Approach in Solving University Timetabling Problems. Information Sciences. Vol. 283, 1-21

Generating timetables for an institution is a challenging and time consuming task due to different demands on the overall structure of the timetable. In this paper, a new hybrid method which is a combination of a great deluge and artificial bee colony algorithm (INMGD-ABC) is proposed to address the university timetabling problem. Artificial bee colony algorithm (ABC) is a population based method that has been introduced in recent years and has proven successful in solving various optimization problems effectively. However, as with many search based approaches, there exist weaknesses in the exploration and exploitation abilities which tend to induce slow convergence of the overall search process. Therefore, hybridization is proposed to compensate for the identified weaknesses of the ABC. Also, inspired from imperialist competitive algorithms, an assimilation policy is implemented in order to improve the global exploration ability of the ABC algorithm. In addition, Nelder–Mead simplex search method is incorporated within the great deluge algorithm (NMGD) with the aim of enhancing the exploitation ability of the hybrid method in fine-tuning the problem search region. The proposed method is tested on two differing benchmark datasets i.e. examination and course timetabling datasets. A statistical analysis t-test has been conducted and shows the performance of the proposed approach as significantly better than basic ABC algorithm. Finally, the experimental results are compared against state-of-the art methods in the literature, with results obtained that are competitive and in certain cases achieving some of the current best results to those in the literature.

A novel hybrid swarm based approach for curriculum based course timetabling problem

This work applies a hybrid approach in solving the university curriculum-based course timetabling problem as presented as part of the 2nd International Timetabling Competition 2007 (ITC2007). The core of the hybrid approach is based on an artificial bee colony algorithm. Past methods have applied artificial bee colony algorithms to university timetabling problems with high degrees of success. Nevertheless, there exist inefficiencies in the associated search abilities in term of exploration and exploitation. To improve the search abilities, this work introduces a hybrid approach entitled nelder-mead great deluge artificial bee colony algorithm (NMGD-ABC) where it combined additional positive elements of particle swarm optimization and great deluge algorithm. In addition, nelder-mead local search is incorporated into the great deluge algorithm to further enhance the performance of the resulting method. The proposed method is tested on curriculum-based course timetabling as presented in the ITC2007. Experimental results reveal that the proposed method is capable of producing competitive results as compared with the other approaches described in literature

Using geostatistical Bayesian Updating to integrate airborne radiometrics and soil geochemistry to improve mapping for mineral exploration

Mineral exploration programmes around the world use data from remote sensing, geophysics and direct sampling. On a regional scale, the combination of airborne geophysics and ground-based geochemical sampling can aid geological mapping and economic minerals exploration. The fact that airborne geophysical and traditional soil-sampling data are generated at different spatial resolutions means that they are not immediately comparable due to their different sampling density. Several geostatistical techniques, including indicator cokriging and collocated cokriging, can be used to integrate different types of data into a geostatistical model. With increasing numbers of variables the inference of the cross-covariance model required for cokriging can be demanding in terms of effort and computational time. In this paper a Gaussian-based Bayesian updating approach is applied to integrate airborne radiometric data and ground-sampled geochemical soil data to maximise information generated from the soil survey, to enable more accurate geological interpretation for the exploration and development of natural resources. The Bayesian updating technique decomposes the collocated estimate into a production of two models: prior and likelihood models. The prior model is built from primary information and the likelihood model is built from secondary information. The prior model is then updated with the likelihood model to build the final model. The approach allows multiple secondary variables to be simultaneously integrated into the mapping of the primary variable. The Bayesian updating approach is demonstrated using a case study from Northern Ireland where the history of mineral prospecting for precious and base metals dates from the 18th century. Vein-hosted, strata-bound and volcanogenic occurrences of mineralisation are found. The geostatistical technique was used to improve the resolution of soil geochemistry, collected one sample per 2 km2, by integrating more closely measured airborne geophysical data from the GSNI Tellus Survey, measured over a footprint of 65 x 200 m. The directly measured geochemistry data were considered as primary data in the Bayesian approach and the airborne radiometric data were used as secondary data. The approach produced more detailed updated maps and in particular maximized information on mapped estimates of zinc, copper and lead. Greater delineation of an elongated northwest/southeast trending zone in the updated maps strengthened the potential to investigate stratabound base metal deposits.

Young people's self-reported experiences of sexual exploitation and sexual violence: a view from Northern Ireland

The issue of young people’s experiences of sexual exploitation and sexual violence has received increasing political and media attention within recent years. However, whilst many studies have identified this to be an emerging issue of concern, the collation of prevalence data on the extent of these issues is still very much in its infancy. In this article we report on the findings of a large-scale project on the sexual exploitation of young people, undertaken in Northern Ireland from 2009 to 2011. The article primarily explores young people’s self-reported experiences of sexual violence and exploitation, collated from their responses to a module of questions placed in the 2010 Young Life and Times Survey. The quantitative dataset from the survey covers both prevalence of sexually exploitative experiences and young people’s reports about the type of individuals perpetrating these incidents. This dataset is illustrated and contextualised with reference to the qualitative findings from interviews with young people and professionals conducted as part of the wider sexual exploitation study. The article concludes with a consideration of the implications of the findings, with particular reference to the need for further preventative work in this field.

Burrow architecture and digging activity in the Cape dune mole rat

While females are traditionally thought to invest more time and energy into parental care than males, males often invest more resources into searching and displaying for mates, obtaining mates and in male-male conflict. Solitary subterranean mammals perform these activities in a particularly challenging niche, necessitating energetically expensive burrowing to both search for mates and forage for food. This restriction presumably affects males more than females as the former are thought to dig longer tunnels that cover greater distances to search for females. We excavated burrow systems of male and female Cape dune mole rats Bathyergus suillus the, largest truly subterranean mammal, to investigate whether male burrows differ from those of females in ways that reflect mate searching by males. We consider burrow architecture (length, internal dimensions, fractal dimension of tunnel systems, number of nesting chambers and mole mounds on the surface) in relation to mating strategy. Males excavated significantly longer burrow systems with higher fractal dimensions and larger burrow areas than females. Male burrow systems were also significantly farther from one another than females were from other females' burrow systems. However, no sex differences were evident in tunnel cross-sectional area, mass of soil excavated per mound, number of mounds produced per unit burrow length or mass of soil excavated per burrow system. Hence, while males may use their habitat differently from females, they do not appear to differ in the dimensions of the tunnels they create. Thus, exploration and use of the habitat differs between the sexes, which may be a consequence of sex differences in mating behaviour and greater demands for food.

Beyond Sex, Bond and Star Wars : Exhibition Data from the Southampton Odeon 1972-1980

This article uses the personal ledgers of a cinema manager to explore programming and film exhibition at the Southampton Odeon in the 1970s. The detailed accounts provide a rare insight into cinema exhibition and challenge the notion that 1970s cinema was all about sex, violence, horror and exploitation, suggesting instead that audiences at this cinema, favoured very different fare.

Robust food supply supply chains:An integrated framework for vulnerability assessment and disturbance management

The operation of supply chains (SCs) has for many years been focused on efficiency, leanness and responsiveness. This has resulted in reduced slack in operations, compressed cycle times, increased productivity and minimised inventory levels along the SC. Combined with tight tolerance settings for the realisation of logistics and production processes, this has led to SC performances that are frequently not robust. SCs are becoming increasingly vulnerable to disturbances, which can decrease the competitive power of the entire chain in the market. Moreover, in the case of food SCs non-robust performances may ultimately result in empty shelves in grocery stores and supermarkets.
The overall objective of this research is to contribute to Supply Chain Management (SCM) theory by developing a structured approach to assess SC vulnerability, so that robust performances of food SCs can be assured. We also aim to help companies in the food industry to evaluate their current state of vulnerability, and to improve their performance robustness through a better understanding of vulnerability issues. The following research questions (RQs) stem from these objectives:
RQ1: What are the main research challenges related to (food) SC robustness?
RQ2: What are the main elements that have to be considered in the design of robust SCs and what are the relationships between these elements?
RQ3: What is the relationship between the contextual factors of food SCs and the use of disturbance management principles?
RQ4: How to systematically assess the impact of disturbances in (food) SC processes on the robustness of (food) SC performances?
To answer these RQs we used different methodologies, both qualitative and quantitative. For each question, we conducted a literature survey to identify gaps in existing research and define the state of the art of knowledge on the related topics. For the second and third RQ, we conducted both exploration and testing on selected case studies. Finally, to obtain more detailed answers to the fourth question, we used simulation modelling and scenario analysis for vulnerability assessment.
Main findings are summarised as follows.
Based on an extensive literature review, we answered RQ1. The main research challenges were related to the need to define SC robustness more precisely, to identify and classify disturbances and their causes in the context of the specific characteristics of SCs and to make a systematic overview of (re)design strategies that may improve SC robustness. Also, we found that it is useful to be able to discriminate between varying degrees of SC vulnerability and to find a measure that quantifies the extent to which a company or SC shows robust performances when exposed to disturbances.
To address RQ2, we define SC robustness as the degree to which a SC shows an acceptable performance in (each of) its Key Performance Indicators (KPIs) during and after an unexpected event that caused a disturbance in one or more logistics processes. Based on the SCM literature we identified the main elements needed to achieve robust performances and structured them together to form a conceptual framework for the design of robust SCs. We then explained the logic of the framework and elaborate on each of its main elements: the SC scenario, SC disturbances, SC performance, sources of food SC vulnerability, and redesign principles and strategies.
Based on three case studies, we answered RQ3. Our major findings show that the contextual factors have a consistent relationship to Disturbance Management Principles (DMPs). The product and SC environment characteristics are contextual factors that are hard to change and these characteristics initiate the use of specific DMPs as well as constrain the use of potential response actions. The process and the SC network characteristics are contextual factors that are easier to change, and they are affected by the use of the DMPs. We also found a notable relationship between the type of DMP likely to be used and the particular combination of contextual factors present in the observed SC.
To address RQ4, we presented a new method for vulnerability assessments, the VULA method. The VULA method helps to identify how much a company is underperforming on a specific Key Performance Indicator (KPI) in the case of a disturbance, how often this would happen and how long it would last. It ultimately informs the decision maker about whether process redesign is needed and what kind of redesign strategies should be used in order to increase the SC’s robustness. The VULA method is demonstrated in the context of a meat SC using discrete-event simulation. The case findings show that performance robustness can be assessed for any KPI using the VULA method.
To sum-up the project, all findings were incorporated within an integrated framework for designing robust SCs. The integrated framework consists of the following steps: 1) Description of the SC scenario and identification of its specific contextual factors; 2) Identification of disturbances that may affect KPIs; 3) Definition of the relevant KPIs and identification of the main disturbances through assessment of the SC performance robustness (i.e. application of the VULA method); 4) Identification of the sources of vulnerability that may (strongly) affect the robustness of performances and eventually increase the vulnerability of the SC; 5) Identification of appropriate preventive or disturbance impact reductive redesign strategies; 6) Alteration of SC scenario elements as required by the selected redesign strategies and repeat VULA method for KPIs, as defined in Step 3.
Contributions of this research are listed as follows. First, we have identified emerging research areas - SC robustness, and its counterpart, vulnerability. Second, we have developed a definition of SC robustness, operationalized it, and identified and structured the relevant elements for the design of robust SCs in the form of a research framework. With this research framework, we contribute to a better understanding of the concepts of vulnerability and robustness and related issues in food SCs. Third, we identified the relationship between contextual factors of food SCs and specific DMPs used to maintain robust SC performances: characteristics of the product and the SC environment influence the selection and use of DMPs; processes and SC networks are influenced by DMPs. Fourth, we developed specific metrics for vulnerability assessments, which serve as a basis of a VULA method. The VULA method investigates different measures of the variability of both the duration of impacts from disturbances and the fluctuations in their magnitude.
With this project, we also hope to have delivered practical insights into food SC vulnerability. First, the integrated framework for the design of robust SCs can be used to guide food companies in successful disturbance management. Second, empirical findings from case studies lead to the identification of changeable characteristics of SCs that can serve as a basis for assessing where to focus efforts to manage disturbances. Third, the VULA method can help top management to get more reliable information about the “health” of the company.
The two most important research opportunities are: First, there is a need to extend and validate our findings related to the research framework and contextual factors through further case studies related to other types of (food) products and other types of SCs. Second, there is a need to further develop and test the VULA method, e.g.: to use other indicators and statistical measures for disturbance detection and SC improvement; to define the most appropriate KPI to represent the robustness of a complete SC. We hope this thesis invites other researchers to pick up these challenges and help us further improve the robustness of (food) SCs.

Swarm scheduling approaches for work-flow applications with security constraints in distributed data-intensive computing environments

The scheduling problem in distributed data-intensive computing environments has become an active research topic due to the tremendous growth in grid and cloud computing environments. As an innovative distributed intelligent paradigm, swarm intelligence provides a novel approach to solving these potentially intractable problems. In this paper, we formulate the scheduling problem for work-flow applications with security constraints in distributed data-intensive computing environments and present a novel security constraint model. Several meta-heuristic adaptations to the particle swarm optimization algorithm are introduced to deal with the formulation of efficient schedules. A variable neighborhood particle swarm optimization algorithm is compared with a multi-start particle swarm optimization and multi-start genetic algorithm. Experimental results illustrate that population based meta-heuristics approaches usually provide a good balance between global exploration and local exploitation and their feasibility and effectiveness for scheduling work-flow applications. © 2010 Elsevier Inc. All rights reserved.

Using Graphs to Visualise and Detect Anomalies in Access Control System Transactions

Physical Access Control Systems are commonly used to secure doors in buildings such as airports, hospitals, government buildings and offices. These systems are designed primarily to provide an authentication mechanism, but they also log each door access as a transaction in a database. Unsupervised learning techniques can be used to detect inconsistencies or anomalies in the mobility data, such as a cloned or forged Access Badge, or unusual behaviour by staff members. In this paper, we present an overview of our method of inferring directed graphs to represent a physical building network and the flows of mobility within it. We demonstrate how the graphs can be used for Visual Data Exploration, and outline how to apply algorithms based on Information Theory to the graph data in order to detect inconsistent or abnormal behaviour.