Path-Dependency, Stocks, Switching Points, Flows: Reflections on Long-term Global Change and Local Opportunities

This paper examines the possibilities for peripheral localities to achieve upward mobility in the world-system by “hooking on” to larger processes of world-system accumulation. In particular, is it possible for economies that are dependent on foreign investment to receive a flow of investments that is high enough to overcome the negative impacts of a high stock of foreign investment, thus enabling them to cross a threshold and achieve upward mobility in the world-system? An analysis of therecent experience of the southern Irish “Celtic Tiger” economy during 1990-2000 indicates that such an upward movement is possible on the basis of massive foreign investment inflows. On closer examination, however, the Irish-type model appears to be highly deficient, because a high proportion of growth is illusionary and also on grounds of social desirability and lack of generalizability.

Aggression after traumatic brain injury: Analysing socially desirable responses and the nature of aggressive traits.

Primary objective: To compare patients with traumatic brain injury (TBI) with controls on sub-types of aggression and explore the role of social desirability.
Design: Quasi-experimental, matched-participants design.
Methods and procedures: Sixty-nine participants were included in the study. The sample comprised a TBI group (n = 24), a spinal cord injury (SCI) group (n = 21) and an uninjured (UI) group of matched healthy volunteers (n = 24). Participants were given self-report measures of aggression, social desirability and impulsivity. Sixty-one independent ‘other-raters’ were nominated, who rated participant pre-morbid and post-morbid aggression.
Main outcomes and results: Using standardized norms, 25–39% of participants with TBI were classified as high average–very high on anger and 35–38% as high average–very high on verbal aggression. Other-raters rated participants with TBI as significantly higher on verbal aggression than SCI and UI participants. There were no differences between the groups on physical aggression. The TBI group also had higher levels of impulsivity than SCI and UI groups. Social desirability was a highly significant predictor of self-reported aggression for the entire sample.
Conclusions: Impulsive verbal aggression and anger are the principal aggressive traits after brain injury. Physical aggression may present in extreme cases after TBI, but appears less prominent overall in this population. Social desirability, previously overlooked in research examining TBI aggression, emerged as an influential variable that should be considered in future TBI research.

Effect of Mix Proportions on Rheological and Hardened Properties of Composite Cement Pastes

There is an increasing need to identify the effect of mix composition on the rheological properties of composite cement pastes using simple tests to determine the fluidity, the cohesion and other mechanical properties of grouting applications such as compressive strength. This paper reviews statistical models developed using a fractional factorial design which was carried out to model the influence of key parameters on properties affecting the performance of composite cement paste. Such responses of fluidity included mini-slump, flow time using Marsh cone and cohesion measured by Lombardi plate meter and unit weight, and compressive strength at 3 d, 7 d and 28 d. The models are valid for mixes with 0.35 to 0.42 water-to-binder ratio (W/B), 10% to 40% of pulverised fuel ash (PFA) as replacement of cement by mass, 0.02 to 0.06% of viscosity enhancer admixture (VEA), by mass of binder, and 0.3 to 1.2% of superplasticizer (SP), by mass of binder. The derived models that enable the identification of underlying primary factors and their interactions that influence the modelled responses of composite cement paste are presented. Such parameters can be useful to reduce the test protocol needed for proportioning of composite cement paste. This paper attempts also to demonstrate the usefulness of the models to better understand trade-offs between parameters and compare the responses obtained from the various test methods which are highlighted. The multi parametric optimization is used in order to establish isoresponses for a desirability function of cement composite paste. Results indicate that the replacement of cement by PFA is compromising the early compressive strength and up 26%, the desirability function decreased.

Optimization of Cement Grouts Containing Silica Fume and Viscosity Modifying Admixture

There is an increasing need to identify the effect of mix composition on the rheological properties of cementitious grouts using minislump, Marsh cone, cohesion plate, washout test, and cubes to determine the fluidity, the cohesion, and other mechanical properties of grouting applications. Mixture proportioning involves the tailoring of several parameters to achieve adequate fluidity, cohesion, washout resistance and compressive strength. This paper proposes a statistical design approach using a composite fractional factorial design which was carried out to model the influence of key parameters on the performance of cement grouts. The responses relate to performance included minislump, flow time using Marsh cone, cohesion measured by Lombardi plate meter, washout mass loss and compressive strength at 3, 7, and 28 days. The statistical models are valid for mixtures with water-to-binder ratio of 0.37–0.53, 0.4–1.8% addition of high-range water reducer (HRWR) by mass of binder, 4–12% additive of silica fume as replacement of cement by mass, and 0.02–0.8% addition of viscosity modifying admixture (VMA) by mass of binder. The models enable the identification of underlying factors and interactions that influence the modeled responses of cement grout. The comparison between the predicted and measured responses indicated good accuracy of the established models to describe the effect of the independent variables on the fluidity, cohesion, washout resistance and the compressive strength. This paper demonstrates the usefulness of the models to better understand trade-offs between parameters. The multiparametric optimization is used to establish isoresponses for a desirability function for cement grout. An increase of HRWR led to an increase of fluidity and washout, a reduction in plate cohesion value, and a reduction in the Marsh cone time. An increase of VMA demonstrated a reduction of fluidity and the washout mass loss, and an increase of Marsh cone time and plate cohesion. Results indicate that the use of silica fume increased the cohesion plate and Marsh cone, and reduced the minislump. Additionally, the silica fume improved the compressive strength and the washout resistance.

Purchasing power parity versus fixed exchange rate rules: A stability and welfare analysis

This paper evaluates the desirability of PPP rules vis-á-vis fixed exchange rates both in terms of welfare and stability properties. The analysis is conducted within a small open-economy New Keynesian framework extended to include a cost channel. In terms of stability, we find that while the equilibrium is always unique under fixed exchange rates its uniqueness critically depends upon the presence/absence of the cost channel under a PPP rule. Overall, then, in terms of welfare a fixed exchange rate always outperforms a PPP rule.

Anger, aggression, and self-harm in PTSD and complex PTSD

This study examined the contribution of complex posttraumatic stress disorder (PTSD) diagnosis and symptomatology to the difficulties of anger, aggression, and self-harm in a Northern Ireland clinical community sample. A "current complex PTSD" (CCPTSD) group (n = 11) was compared with a "current PTSD" group (n = 31) on self-report measures of these variables. The CCPTSD group demonstrated significantly higher levels of physical aggression and selfharm than the PTSD group. The complex PTSD symptom of 'alterations in self-perception' was a significant predictor of aggression and history of self-harm, suggesting the potential role of posttraumatic shame and self-loathing in PTSD theoretical models of these destructive behaviors. Social desirability was a notable confounding influence in the assessment of anger, aggression, and self-harm in traumatised individuals.

Trauma typology as a risk factor for aggression and self-harm in a complex PTSD population: The mediating role of alterations in self-perception

This study examined the role of prolonged, repeated traumatic experiences such as childhood and sectarian trauma in the development of posttraumatic aggression and self-harm. Forty-four adult participants attending therapy for complex trauma in Northern Ireland were obtained via convenience sampling. When social desirability was controlled, childhood emotional and physical neglect were significant correlates of posttraumatic hostility and history of self-harm. These relationships were mediated by alterations in self-perception (e.g., shame, guilt). Severity of sectarian-related experiences was not related to self-destructive behaviors. Moreover, none of the trauma factors were related to overt aggressive behavior. The findings have implications for understanding risk factors for posttraumatic aggression and self-harm, as well as their treatment. © 2013 Copyright Taylor & Francis Group, LLC.

Investigation of Finish-cut of Microelectrodischarge Milling for Nano Surface Finish

In this article, the machining conditions to achieve nanometric surface roughness in finish cut microelectrodischarge milling were investigated. For a constant gap voltage, the effect of feed rate and capacitance was studied on average surface roughness (Ra) and maximum peak-to-valley roughness height (Ry). Statistical models were developed using a three-level, two-factor experimental design. The developed models minimized Ra and Ry by desirability function approach. Maximum desirability was found to be more than 98%. The minimum values of Ra and Ry were 23 and 173 nm, respectively, for 1.00 μm s-1 feed rate and 0.01 nF capacitance. Verification experiments were conducted to check the accuracy of the models, where the responses were found to be very close to the predicted values. Thus, the developed models can be used to generate nanometric level surface finish, which are useful for many applications in microelectromechanical systems.

Investigation of Machining Parameters for Multiple Response Optimization in Microelectrodischarge Milling

This paper investigated the influence of three micro electrodischarge milling process parameters, which were feed rate, capacitance, and voltage. The response variables were average surface roughness (R a ), maximum peak-to-valley roughness height (R y ), tool wear ratio (TWR), and material removal rate (MRR). Statistical models of these output responses were developed using three-level full factorial design of experiment. The developed models were used for multiple-response optimization by desirability function approach to obtain minimum R a , R y , TWR, and maximum MRR. Maximum desirability was found to be 88%. The optimized values of R a , R y , TWR, and MRR were 0.04, 0.34 μm, 0.044, and 0.08 mg min−1, respectively for 4.79 μm s−1 feed rate, 0.1 nF capacitance, and 80 V voltage. Optimized machining parameters were used in verification experiments, where the responses were found very close to the predicted values.

‘Harmonising the precaution out of the precautionary principle? The need for maintaining flexibility and an interpretative role’

The precautionary principle has the potential to act as a valuable tool in food law. It operates in areas of scientific uncertainty, calling for protective measures where there are potential threats to human health (or the environment). However, the manner of the principle’s incorporation and implementation within legislation are key to its effectiveness and general legitimacy. Specific considerations include the role and nature of risk assessments, assessors, sources of evidence, divergent opinions, risk communication, other legitimate factors and the weighting of interests. However, more fundamentally, the crystallisation of approaches and removal of all flexibility would undermine the principle’s central tenets. Firstly, principles crucially play a guiding and interpretative role. Secondly, reflexive modernisation and continuing scientific uncertainty call for the precautionary principle’s continued application – precautionary measures do not end the precautionary principle’s relevance. This can be partially achieved through the legislation so as to facilitate later precautionary measures, e.g. through temporary authorisations, derogations and safeguard clauses. However, crucially, it requires that the legislation also be interpreted in light of the precautionary principle. This paper investigates the logic behind the Court of Justice of the EU’s judgments and the circumstances that enable or deter the Court in taking, or permitting, stronger precautionary approaches. Although apparently inconsistent, a number of contextual factors including the legislative provisions and actors involved influence the judgments substantially. The analysis provides insight into improving the principle’s incorporation to facilitate its continued application and maintenance of flexibility, whilst bearing in mind the general desirability of objectivity and legal certainty.

Territoriality and Migration in a Divided Society: Lay Theories of Citizenship and Place in Northern Ireland

The study of citizenship has increasingly focused on the ways in which spatialized understandings of the concept can be used to marginalise and exclude social groups: exclusive constructions of national boundaries, local neighbourhoods and public spaces can deny marginalised groups their social and political rights. Less attention has been paid to how constructions of place can accommodate different groups’ rights and promote peaceful coexistence. This is particularly important in locations where migration disrupts existing understandings (‘lay theories’) of the relationship between residency, identity and collective rights. The present research examines how spatialized understandings of citizenship shape perceptions of intergroup mixing in previously segregated areas of a post-conflict society. Critical Discursive Social Psychological (CDSP) analysis of 30 interviews with long-term residents and recent migrants to increasingly mixed areas of Belfast shows that, while all pa
rticipants acknowledged Northern Ireland’s territorialisation, different lay theories of citizenship underpin the possibility and desirability of intergroup coexistence. Long-term residents drew upon understandings of the negative citizenry of the outgroup to argue against the possibility of peaceful coexistence within their locale, while recent incomers gave evidence of their own experiences of good citizenship within the shared spaces of neighbourhood to demonstrate that this could and should be achieved. The implications of lay theories of citizenship for the study of residential migration and mixing are discussed