39 resultados para Condition De Brézis-crandall and Pazy
Resumo:
Web openings could be used in cold-formed steel beam members, such as wall studs or floor joints, to facilitate ease of services in buildings. In this paper, a combination of tests and non-linear finite element analyses is used to investigate the effect of such holes on web crippling under end-one-flange (EOF) loading condition; the cases of both flanges fastened and unfastened to the bearing plates are considered. The results of 74 web crippling tests are presented, with 22 tests conducted on channel sections without web openings and 52 tests conducted on channel sections with web openings. In the case of the tests with web openings, the hole was either located centred above the bearing plates or having a horizontal clear distance to the near edge of the bearing plates. A good agreement between the tests and finite element analyses was obtained in term of both strength and failure modes.
Resumo:
This study investigated two hypotheses regarding the mapping of perception to action during imitation. The first hypothesis predicted that as children’s cognitive capacities increase the tendency to map one goal and disregard others during imitation should decrease. This hypothesis was tested by comparing the performances of 168 4- to 7-year-olds in a gestural imitation task developed by Bekkering, Wohlschläger, and Gattis. The second hypothesis predicted that reducing the mapping between perception and action should reduce the demands on the cognitive resources of the child. This hypothesis was tested by creating a condition in which perception and action overlapped by sharing objects between experimenter and child. In three experimental conditions, an adult modelled four gestures, directed at either: 1) one of two sets of round stickers (proprietary objects); 2) the same location on the table, without any sticker (no objects); or 3) one set of round stickers, which were shared with the child (shared objects). The results confirmed both hypotheses. Four- and five-year-olds imitated less accurately when imitation involved mapping of both objects and movements (proprietary and shared objects) than when imitation involved mapping movements only (no objects). Seven-year-olds imitated accurately in all three conditions, demonstrating that increased cognitive capacity allowed them to map multiple goals from perception to action. Most importantly, reducing the mapping between perception and action in the shared objects condition facilitated imitation, specifically for the transitional group, 6-year-olds. We conclude that mapping between perception and action is not direct, but resembles mapping relations in analogical reasoning: cognitive processes mediate mapping from perception to action.
Resumo:
Although interest in crossbreeding within dairy systems has increased, the role of Jersey crossbred cows within high concentrate input systems has received little attention. This experiment was designed to examine the performance of Holstein-Friesian (HF) and Jersey x Holstein-Friesian (J x HF) cows within a high concentrate input total confinement system (CON) and a medium concentrate input grazing system (GRZ). Eighty spring-calving dairy cows were used in a 2 (cow genotype) x 2 (milk production system) factorial design experiment. The experiment commenced when cows calved and encompassed a full lactation. With GRZ, cows were offered diets containing grass silage and concentrates [70:30 dry matter (DM) ratio] until turnout, grazed grass plus 1.0 kg of concentrate/day during a 199-d grazing period, and grass silage and concentrates (75:25 DM ratio) following rehousing and until drying-off. With CON, cows were confined throughout the lactation and offered diets containing grass silage and concentrates (DM ratio; 40:60, 50:50, 40:40, and 75:25 during d 1 to 100, 101 to 200, 201 to 250, and 251 until drying-off, respectively). Full-lactation concentrate DM intakes were 791 and 2,905 kg/cow for systems GRZ and CON, respectively. Although HF cows had a higher lactation milk yield than J x HF cows, the latter produced milk with a higher fat and protein content, so that solids-corrected milk yield (SCM) was unaffected by genotype. Somatic cell score was higher with the J x HF cows. Throughout lactation, HF cows were on average 37 kg heavier than J x HF cows, whereas the J x HF cows had a higher body condition score. Within each system, food intake did not differ between genotypes, whereas full-lactation yields of milk, fat plus protein, and SCM were higher with CON than with GRZ. A significant genotype x environment interaction was observed for milk yield, and a trend was found for an interaction with SCM. Crossbred cows on CON gained more body condition than HF cows, and overall pregnancy rate was unaffected by either genotype or management system. In summary, milk and SCM yields were higher with CON than with GRZ, whereas genotype had no effect on SCM. However, HF cows exhibited a greater milk yield response and a trend toward a greater SCM yield response with increasing concentrate levels compared with the crossbred cows.
Resumo:
The study of urban and landscape history has recently questioned the peripheral condition of certain areas and re-examined them as valuable parts of an international network . In such a framework cities are not only recipients of foreign influences but active agents in their own urban transformations. Meanwhile, the regeneration of urban waterfronts appears increasingly in the spotlight globally , but the re-use of the waterfront as public space began more than a century ago.
Buenos Aires is an example of a ‘peripheral’ city, in which waterfront parks at the end of the nineteenth century were the product of international influences combined with local conditions, needs and expertise. Buenos Aires developed a continuous increase and diversity of leisure waterfront space, making it different from most European or ‘central’ cities. This paper will analyse the process of translation of landscape design on Buenos Aires’ waterfront while outlining the significance of waterfront parks to the city and its growing urban population.
Resumo:
The chronic vascular complications of diabetes (nephropathy, retinopathy and accelerated atherosclerosis) are a major cause of morbidity and premature mortality. In spite of the more widespread availability of intensive diabetes management, approximately one in three people with diabetes develop aggressive complications and over 70% die of atherosclerosis-related diseases. Genetic and acquired factors are likely to be contributory. Potential mediators of vascular damage may include the interrelated processes of lipoprotein abnormalities, glycation, oxidation and endothelial dysfunction. Lipoprotein abnormalities encompass alterations in lipid concentrations, lipoprotein composition and subclass distribution and lipoprotein-related enzymes. Nonenzymatic glycation and oxidative damage to lipoproteins, other proteins and to vascular structures may also be deleterious. As atherosclerosis is a chronic condition commencing in youth, and because clinical events may be silent in diabetes, surrogate measures of vascular disease are important for early identification of diabetic patients with or at high risk of vascular damage, and for monitoring efficacy of interventions. The increasing array of biochemical assays for markers and mediators of vascular damage, noninvasive measures of vascular health, and therapeutic options should enable a reduction in the excessive personal and economic burden of vascular disease in type 1 and type 2 diabetes.
Resumo:
The need to integrate cost into the early product definition process as an engineering parameter is addressed. The application studied is a fuselage panel that is typical for commercial transport regional jets. Consequently, a semi-empirical numerical analysis using reference data was coupled to model the structural integrity of thin-walled structures with regard to material failure and buckling: skin, stringer, flexural, and interrivet. The optimization process focuses on direct operating cost (DOC) as a function of acquisition cost and fuel burn. It was found that the ratio of acquisition cost to fuel burn was typically 4:3 and that there was a 10% improvement in the DOC for the minimal DOC condition over the minimal weight condition because of the manufacturing cost saving from having a reduced number of larger-area stringers and a slightly thicker skin than that preferred by the minimal weight condition. Also note that the minimal manufacturing cost condition was slightly better than the minimal weight condition, which highlights the key finding: The traditional minimal weight condition is a dated and suboptimal approach to airframe structural design.
Resumo:
Cerebral palsy (CP) is a relatively rare condition with enormous social and financial impact. Information about CP is not routinely collected in the United Kingdom. We have pooled non-identifiable data from the five currently active UK CP registers to form the UKCP database: birth years 1960–1997. This article describes the rationale behind this collaboration and the creation of the database. Data about 6910 children with CP are currently held. The mean annual prevalence rate was 2.0 per 1000 live births for birth years 1986–1996. Where type is known, 91 per cent have spastic CP. Where data are available, nearly one-third of children have severely impaired lower limb function, and nearly a quarter have severely impaired upper limb function. As well as describing the range and complexity of motor and associated impairments, the pooled data from the UKCP database provide a platform for studies of aetiology, long-term outcomes, participation and service needs. The UKCP database is an important national resource for the surveillance of CP and the study of its epidemiology in the United Kingdom.
Resumo:
A methodology to estimate the cost implications of design decisions by integrating cost as a design parameter at an early design stage is presented. The model is developed on a hierarchical basis, the manufacturing cost of aircraft fuselage panels being analysed in this paper. The manufacturing cost modelling is original and relies on a genetic-causal method where the drivers of each element of cost are identified relative to the process capability. The cost model is then extended to life cycle costing by computing the Direct Operating Cost as a function of acquisition cost and fuel burn, and coupled with a semi-empirical numerical analysis using Engineering Sciences Data Unit reference data to model the structural integrity of the fuselage shell with regard to material failure and various modes of buckling. The main finding of the paper is that the traditional minimum weight condition is a dated and sub-optimal approach to airframe structural design.
Resumo:
Birdsong is a sexually selected trait that serves in territory defence and mate choice. Individual song traits can be affected by the body condition of the male and thus may reflect his quality. Such relations between male quality and general singing performance raise the question whether differences in male quality also affect response strategies used in dyadic interactions. To address this question, we studied the relation between pairing success of male common nightingales, Luscinia megarhynchos, and their responses to rivals posing different levels of threat. Using interactive playback, we exposed males prior to mating to either aggressively or moderately singing rivals (by song overlapping and song alternating, respectively). Males that remained unpaired throughout the season (bachelors) interrupted their singing significantly more often after being overlapped than after alternating playback, whereas subsequently mated males kept the number of singing interruptions more constant across playback treatment. This suggests that subsequently paired males are less discriminative than are bachelors when challenged by rivals varying in aggressiveness. Regardless of playback treatment, males that later became paired responded significantly more strongly than did bachelor males. Thus, an increase in singing after a vocal interaction prior to mating predicted future mating success. (c) 2006 The Association for the Study of Animal Behaviour. Published by Elsevier Ltd. All rights reserved.
Resumo:
We describe the properties of the exploding foil neon-like germanium soft X-ray lasers having wavelengths of 19-28 nm and gain length product of more than 10. The measured X-ray intensity of lasing lines from an exploding foil target has been explained with the results of the plasma hydrodynamic code from the viewpoint of suitable condition of electron density and temperature for creating population inversion.
Resumo:
The study of urban and landscape history has recently questioned the peripheral condition of certain areas and re-examined them as valuable parts of an international network . Meanwhile, the regeneration of urban waterfronts appears increasingly in the spotlight globally , while the re-use of the waterfront as public space actually began more than a century ago.
Buenos Aires is an example of a peripheral city, where waterfront parks at the end of the nineteenth century were the product of international influences combined with local conditions, needs and expertise. This paper will analyse the process of translation of landscape design on Buenos Aires’ waterfront while outlining the significance of waterfront parks for civilising the growing urban population.
Resumo:
Digital manufacturing techniques can simulate complex assembly sequences using computer-aided design-based, as-designed' part forms, and their utility has been proven across several manufacturing sectors including the ship building, automotive and aerospace industries. However, the reality of working with actual parts and composite components, in particular, is that geometric variability arising from part forming or processing conditions can cause problems during assembly as the as-manufactured' form differs from the geometry used for any simulated build validation. In this work, a simulation strategy is presented for the study of the process-induced deformation behaviour of a 90 degrees, V-shaped angle. Test samples were thermoformed using pre-consolidated carbon fibre-reinforced polyphenylene sulphide, and the processing conditions were re-created in a virtual environment using the finite element method to determine finished component angles. A procedure was then developed for transferring predicted part forms from the finite element outputs to a digital manufacturing platform for the purpose of virtual assembly validation using more realistic part geometry. Ultimately, the outcomes from this work can be used to inform process condition choices, material configuration and tool design, so that the dimensional gap between as-designed' and as-manufactured' part forms can be reduced in the virtual environment.
Resumo:
Although child maltreatment due to abuse or neglect is pervasive within our society, less
is known about fabricated or induced illness by carers (FII), which is considered to be a
rare form of child abuse. FII occurs when a caregiver (in 93% of cases, the mother)
misrepresents the child as ill either by fabricating, or much more rarely, producing
symptoms and then presenting the child for medical care, disclaiming knowledge of the
cause of the problem. The growing body of literature on FII reflects the lack of clarity
amongst professionals as to what constitutes FII, the difficulties involved in diagnosis,
and the lack of research into psychotherapeutic intervention with perpetrators. This lack
of clarity further complicates the identification, management and treatment of children
suffering from FII and may result in many cases going undetected, with potentially lifethreatening
consequences for children. It has been suggested that there is a national
under-reporting of fabricated or induced illness. In practice these cases are encountered
more frequently due to the chronic nature of the presentations, the large number of
professionals who may be involved and the broad spectrum including milder cases that
may not all require a formal child protection response. Diagnosis of fabricated disease
can be especially difficult, because the reported signs and symptoms cannot be confirmed
(when they are being exaggerated or imagined) or may be inconsistent (when they are
induced or fabricated). This paper highlights and discusses the controversies and
complexities of this condition, the risks to the child and how it affects children; the
paucity of systematic research regarding what motivates mothers to harm their children
by means of illness falsification; how the condition should be managed and treated for
both mother and child; and implications for policy and practice.
Resumo:
Respiratory viral infections are a common cause of acute coughing, an irritating symptom for the patient and an important mechanism of transmission for the virus. Although poorly described, the inflammatory consequences of infection likely induce coughing by chemical (inflammatory mediator) or mechanical (mucous) activation of the cough-evoking sensory nerves that innervate the airway wall. For some individuals, acute cough can evolve into a chronic condition, in which cough and aberrant airway sensations long outlast the initial viral infection. This suggests that some viruses have the capacity to induce persistent plasticity in the neural pathways mediating cough. In this brief review we present the clinical evidence of acute and chronic neural dysfunction following viral respiratory tract infections and explore possible mechanisms by which the nervous system may undergo activation, sensitization and plasticity.
Resumo:
Context: The initial distribution of spin rates of massive stars is a fingerprint of their elusive formation process. It also sets a key initial condition for stellar evolution and is thus an important ingredient in stellar population synthesis. So far, most studies have focused on single stars. Most O stars are, however, found in multiple systems.
Aims: By establishing the spin-rate distribution of a sizeable sample of O-type spectroscopic binaries and by comparing the distributions of binary subpopulations with one another and with that of presumed-single stars in the same region, we aim to constrain the initial spin distribution of O stars in binaries, and to identify signatures of the physical mechanisms that affect the evolution of the spin rates of massive stars.
Methods: We use ground-based optical spectroscopy obtained in the framework of the VLT-FLAMES Tarantula Survey (VFTS) to establish the projected equatorial rotational velocities (νesini) for components of 114 spectroscopic binaries in 30 Doradus. The νesini values are derived from the full width at half maximum (FWHM) of a set of spectral lines, using a FWHM vs. νesini calibration that we derive based on previous line analysis methods applied to single O-type stars in the VFTS sample.
Results: The overall νesini distribution of the primary stars resembles that of single O-type stars in the VFTS, featuring a low-velocity peak (at νesini<200 kms-1) and a shoulder at intermediate velocities (200 <νesini<300 kms-1). The distributions of binaries and single stars, however, differ in two ways. First, the main peak at νesini ~ 100kms-1 is broader and slightly shifted towards higher spin rates in the binary distribution than that of the presumed-single stars. This shift is mostly due to short-period binaries (Porb~<10 d). Second, the νesini distribution of primaries lacks a significant population of stars spinning faster than 300 kms-1, while such a population is clearly present in the single-star sample. The νesini distribution of binaries with amplitudes of radial velocity variation in the range of 20 to 200 kms-1 (mostly binaries with Porb ~ 10-1000 d and/or with q<0.5) is similar to that of single O stars below νesini~<170kms-1.
Conclusions: Our results are compatible with the assumption that binary components formed with the same spin distribution as single stars, and that this distribution contains few or no fast-spinning stars. The higher average spin rate of stars in short-period binaries may either be explained by spin-up through tides in such tight binary systems, or by spin-down of a fraction of the presumed-single stars and long-period binaries through magnetic braking (or by a combination of both mechanisms). Most primaries and secondaries of SB2 systems with Porb~<10 d appear to have similar rotational velocities. This is in agreement with tidal locking in close binaries where the components have similar radii. The lack of very rapidly spinning stars among binary systems supports the idea that most stars with νesini~> 300kms-1 in the single-star sample are actually spun-up post-binary interaction products. Finally, the overall similarities (low-velocity peak and intermediate-velocity shoulder) of the spin distribution of binary and single stars argue for a massive star formation process in which the initial spin is set independently of whether stars are formed as single stars or as components of a binary system.