38 resultados para 95% confidence of sample values
Resumo:
PURPOSE: To evaluate the prevalence and causes of visual impairment among Chinese children aged 3 to 6 years in Beijing. DESIGN: Population-based prevalence survey. METHODS: Presenting and pinhole visual acuity were tested using picture optotypes or, in children with pinhole vision < 6/18, a Snellen tumbling E chart. Comprehensive eye examinations and cycloplegic refraction were carried out for children with pinhole vision < 6/18 in the better-seeing eye. RESULTS: All examinations were completed on 17,699 children aged 3 to 6 years (95.3% of sample). Subjects with bilateral correctable low vision (presenting vision < 6/18 correctable to >or= 6/18) numbered 57 (0.322%; 95% confidence interval [CI], 0.237% to 0.403%), while 14 (0.079%; 95% CI, 0.038% to 0.120%) had bilateral uncorrectable low vision (best-corrected vision of < 6/18 and >or= 3/60), and 5 subjects (0.028%; 95% CI, 0.004% to 0.054%) were bilaterally blind (best-corrected acuity < 3/60). The etiology of 76 cases of visual impairment included: refractive error in 57 children (75%), hereditary factors (microphthalmos, congenital cataract, congenital motor nystagmus, albinism, and optic nerve disease) in 13 children (17.1 %), amblyopia in 3 children (3.95%), and cortical blindness in 1 child (1.3%). The cause of visual impairment could not be established in 2 (2.63%) children. The prevalence of visual impairment did not differ by gender, but correctable low vision was significantly (P < .0001) more common among urban as compared with rural children. CONCLUSION: The leading causes of visual impairment among Chinese preschool-aged children are refractive error and hereditary eye diseases. A higher prevalence of refractive error is already present among urban as compared with rural children in this preschool population.
Resumo:
Permeable reactive barriers (PRBs) of zero-valent iron (Fe0) are increasingly being used to remediate contaminated ground water. Corrosion of Fe0 filings and the formation of precipitates can occur when the PRB material comes in contact with ground water and may reduce the lifespan and effectiveness of the barrier. At present, there are no routine procedures for preparing and analyzing the mineral precipitates from Fe0 PRB material. These procedures are needed because mineralogical composition of corrosion products used to interpret the barrier processes can change with iron oxidation and sample preparation. The objectives of this study were (i) to investigate a method of preparing Fe0 reactive barrier material for mineralogical analysis by X-ray diffraction (XRD), and (ii) to identify Fe mineral phases and rates of transformations induced by different mineralogical preparation techniques. Materials from an in situ Fe0 PRB were collected by undisturbed coring and processed for XRD analysis after different times since sampling for three size fractions and by various drying treatments. We found that whole-sample preparation for analysis was necessary because mineral precipitates occurred within the PRB material in different size fractions of the samples. Green rusts quickly disappeared from acetone-dried samples and were not present in air-dried and oven-dried samples. Maghemite/magnetite content increased over time and in oven-dried samples, especially after heating to 105°C. We conclude that care must be taken during sample preparation of Fe0 PRB material, especially for detection of green rusts, to ensure accurate identification of minerals present within the barrier system.
Resumo:
The recent emergence of high-throughput arrays for methylation analysis has made the influence of tumor content on the interpretation of methylation levels increasingly pertinent. However, to what degree does tumor content have an influence, and what degree of tumor content makes a specimen acceptable for accurate analysis remains unclear. Taking a systematic approach, we analyzed 98 unselected formalin-fixed and paraffin-embedded gastric tumors and matched normal tissue samples using the Illumina GoldenGate methylation assay. Unsupervised hierarchical clustering showed 2 separate clusters with a significant difference in average tumor content levels. The probes identified to be significantly differentially methylated between the tumors and normals also differed according to the tumor content of the samples included, with the sensitivity of identifying the
Resumo:
Regulatory authorities, the food industry and the consumer demand reliable determination of chemical contaminants present in foods. A relatively new analytical technique that addresses this need is an immunobiosensor based on surface plasmon resonance (SPR) measurements. Although a range of tests have been developed to measure residues in milk, meat, animal bile and honey, a considerable problem has been encountered with both serum and plasma samples. The high degree of non-specific binding of some sample components can lead to loss of assay robustness, increased rates of false positives and general loss of assay sensitivity. In this paper we describe a straightforward precipitation technique to remove interfering substances from serum samples to be analysed for veterinary anthelmintics by SPR. This technique enabled development of an assay to detect a wide range of benzimidazole residues in serum samples by immunobiosensor. The limit of quantification was below 5 ng/ml and coefficients of variation were about 2%.
Resumo:
The characterisation of soils for civil engineering purposes depends on removing sufficiently high-quality samples from the ground. Accurate evaluation of sample quality is therefore important if reliable design parameters are to be determined. This paper describes the use of unconfined shear wave velocity (V s) and suction (u r) measurements to assess sample quality rapidly in soft clay. Samples of varying quality from three well-characterised soft clay sites are initially assessed using conventional techniques, and their results compared with V s and u r measurements performed on the same samples. It is observed that the quality of samples indicated by these measurements is very similar to those inferred from traditional disturbance measures, with V s being the more reliable indicator. A tentative empirically derived criterion, based on samples tested in this project, is proposed to quantify sample disturbance combining both V s and u r measurements. Further work using this criterion on different materials is important so as to test its usefulness.
Resumo:
Purpose: The authors sought to quantify neighboring and distant interpoint correlations of threshold values within the visual field in patients with glaucoma. Methods: Visual fields of patients with confirmed or suspected glaucoma were analyzed (n = 255). One eye per patient was included. Patients were examined using the 32 program of the Octopus 1-2-3. Linear regression analysis among each of the locations and the rest of the points of the visual field was performed, and the correlation coefficient was calculated. The degree of correlation was categorized as high (r > 0.66), moderate (0.66 = r > 0.33), or low (r = 0.33). The standard error of threshold estimation was calculated. Results: Most locations of the visual field had high and moderate correlations with neighboring points and with distant locations corresponding to the same nerve fiber bundle. Locations of the visual field had low correlations with those of the opposite hemifield, with the exception of locations temporal to the blind spot. The standard error of threshold estimation increased from 0.6 to 0.9 dB with an r reduction of 0.1. Conclusion: Locations of the visual field have highest interpoint correlation with neighboring points and with distant points in areas corresponding to the distribution of the retinal nerve fiber layer. The quantification of interpoint correlations may be useful in the design and interpretation of visual field tests in patients with glaucoma.
Resumo:
Tetrodotoxin (TTX) is one of the most potent marine neurotoxins reported. The global distribution of this toxin is spreading with the European Atlantic coastline now being affected. Climate change and increasing pollution have been suggested as underlying causes for this. In the present study, two different sample preparation techniques were used to extract TTX from Trumpet shells and pufferfish samples. Both extraction procedures (accelerated solvent extraction (ASE) and a simple solvent extraction) were shown to provide good recoveries (80-92%). A UPLC-MS/MS method was developed for the analysis of TTX and validated following the guidelines contained in the Commission Decision 2002/657/EC for chemical contaminant analysis. The performance of this procedure was demonstrated to be fit for purpose. This study is the first report on the use of ASE as a mean for TTX extraction, the use of UPLC-MS/MS for TTX analysis, and the validation of this method for TTX in gastropods.
Resumo:
This article examines hospital provision in Ireland during the early twentieth century. It examines attempts by the newly independent Irish Free State to reform and de-stigmatise medical relief in former workhouse infirmaries. Such reforms were designed to move away from nineteenth century welfare regimes which were underpinned by principles of deterrence. The reform initiated in independent Ireland - the first attempted break-up of the New Poor Law in Great Britain or Ireland - was partly successful. Many of the newly named County and District Hospitals provided solely for medical cases and managed to dissociate such health care provision from the relief of poverty. However, some hospitals continued to act as multifunctional institutions and provided for various categories including the sick, the aged and infirm, 'unmarried mothers' and 'harmless lunatics'. Such institutions often remained associated with the relief of poverty. This article also examines patient fee-payment and outlines how fresh terms of entitlement and means-testing were established. Such developments were even more pronounced in voluntary hospitals where the majority of patients made a financial contribution to their treatment. The article argues that the ability to pay at times determined the type of provision, either voluntary or rate-aided, available to the sick. However, it concludes that the clinical condition of patients often determined whether they entered a more prestigious voluntary hospital or the former workhouse. Although this article concentrates on two Irish case studies, County Kerry and Cork City; it is conceptualised within wider developments with particular reference to the British context.
Resumo:
Permeable reactive barriers (PRBs) of zero-valent iron (Fe0) are increasingly being used to remediate contaminated ground water. Corrosion of Fe0 filings and tbe formation of precipitates can occur when the PRB material comes in contact with ground water and may reduce the lifespan and effectiveness of the barrier. At present, there are no routine procedures for preparing and analyzing the mineral precipitates from Fe0 PRB material. These procedures are needed because mineralogical composition of corrosion products used to interpret the barrier processes can change with iron oxidation and sample preparation. The objectives of this study were (i) to investigate a method of preparing Fe0 reactive barrier material for mineralogical analysis by X-ray diffraction (XRD), and (ii) to identify Fe mineral phases and rates of transformations induced by different mineralogical preparation techniques. Materials from an in situ Fe0 PRB were collected by undisturbed coring and processed for XRD analysis after different times since sampling for three size fractions and by various drying treatments. We found that whole-sample preparation for analysis was necessary because mineral precipitates occurred within the PRB material in different size fractions of the samples. Green rusts quickly disappeared from acetone-dried samples and were not present in air-dried and oven-dried samples Maghemite/magnetite content increased over time and in oven-dried samples, especially after heating to 105°C. We conclude that care must be taken during sample preparation of Fe0 PRB material, especially for detection of green rusts, to ensure accurate identification of minerals present within the barrier system.