29 resultados para 765
Resumo:
A novel application-specific instruction set processor (ASIP) for use in the construction of modern signal processing systems is presented. This is a flexible device that can be used in the construction of array processor systems for the real-time implementation of functions such as singular-value decomposition (SVD) and QR decomposition (QRD), as well as other important matrix computations. It uses a coordinate rotation digital computer (CORDIC) module to perform arithmetic operations and several approaches are adopted to achieve high performance including pipelining of the micro-rotations, the use of parallel instructions and a dual-bus architecture. In addition, a novel method for scale factor correction is presented which only needs to be applied once at the end of the computation. This also reduces computation time and enhances performance. Methods are described which allow this processor to be used in reduced dimension (i.e., folded) array processor structures that allow tradeoffs between hardware and performance. The net result is a flexible matrix computational processing element (PE) whose functionality can be changed under program control for use in a wider range of scenarios than previous work. Details are presented of the results of a design study, which considers the application of this decomposition PE architecture in a combined SVD/QRD system and demonstrates that a combination of high performance and efficient silicon implementation are achievable. © 2005 IEEE.
Resumo:
The inclusion of collisional rates for He-like Fe and Ca ions is discussed with reference to the analysis of solar flare Fe XXV and Ca XIX line emission, particularly from the Yohkoh Bragg Crystal Spectrometer (BCS). The new data are a slight improvement on calculations presently used in the BCS analysis software in that the discrepancy in the Fe XXV y and z line intensities (observed larger than predicted) is reduced. Values of electron temperature from satellite-to-resonance line ratios are slightly reduced (by up to 1 MK) for a given observed ratio. The new atomic data will be incorporated in the Yohkoh BCS databases. The data should also be of interest for the analysis of high-resolution, non-solar spectra expected from the Constellation-X and Astro-E space missions. A comparison is made of a tokamak S XV spectrum with a synthetic spectrum using atomic data in the existing software and the agreement is found to be good, so validating these data for particularly high-n satellite wavelengths close to the S XV resonance line. An error in a data file used for analyzing BCS Fe XXVI spectra is corrected, so permitting analysis of these spectra.
Resumo:
Field configured assembly is a programmable force field method that permits rapid, "hands-free" manipulation, assembly, and integration of mesoscale objects and devices. In this method, electric fields, configured by specific addressing of receptor and counter electrode sites pre-patterned at a silicon chip substrate, drive the field assisted transport, positioning, and localization of mesoscale devices at selected receptor locations. Using this approach, we demonstrate field configured deterministic and stochastic self-assembly of model mesoscale devices, i.e., 50 mum diameter, 670 nm emitting GaAs-based light emitting diodes, at targeted receptor sites on a silicon chip. The versatility of the field configured assembly method suggests that it is applicable to self-assembly of a wide variety of functionally integrated nanoscale and mesoscale systems.
Resumo:
Recently, a single-symbol decodable transmit strategy based on preprocessing at the transmitter has been introduced to decouple the quasi-orthogonal space-time block codes (QOSTBC) with reduced complexity at the receiver [9]. Unfortunately, it does not achieve full diversity, thus suffering from significant performance loss. To tackle this problem, we propose a full diversity scheme with four transmit antennas in this letter. The proposed code is based on a class of restricted full-rank single-symbol decodable design (RFSDD) and has many similar characteristics as the coordinate interleaved orthogonal designs (CIODs), but with a lower peak-to-average ratio (PAR).
Resumo:
Many lizard species will shed their tail as a defensive response (e.g., to escape a putative predator or aggressive conspecific). This caudal autotomy incurs a number of costs as a result of loss of the tail itself, loss of resources (i.e., stored in the tail or due to the cost of regeneration), and altered behavior. Few studies have examined the metabolic costs of caudal autotomy. A previous study demonstrated that geckos can move faster after tail loss as a result of reduced weight or friction with the substrate; however, there are no data for the effects of caudal autotomy on locomotory energetics. We examined the effect of tail loss on locomotory costs in the Cape dwarf gecko Lygodactylus capensis (similar to 0.9 g) using a novel method for collecting data on small lizards, a method previously used for arthropods. We measured CO2 production during 5-10 min of exhaustive exercise (in response to stimulus) and during a 45-min recovery period. During exercise, we measured speed (for each meter moved) as well as total distance traveled. Contrary to our expectations, tailless geckos overall expended less effort in escape running, moving both slower and for a shorter distance, compared with when they were intact. Tailless geckos also exhibited lower excess CO2 production (CO2 production in excess of normal resting metabolic rate) during exercising. This may be due to reduced metabolically active tissue (tails represent 8.7% of their initial body mass). An alternative suggestion is that a change in energy substrate use may take place after tail loss. This is an intriguing finding that warrants future biochemical investigation before we can predict the relative costs of tail loss that lizards might experience under natural conditions.
Resumo:
Object
Trigeminal neuralgia pain causes severe disability. Stereotactic radiosurgery is the least invasive surgical option for patients with trigeminal neuralgia. Since different medical and surgical options have different rates of pain relief and morbidity, it is important to evaluate longer-term outcomes.
Methods
The authors retrospectively reviewed outcomes in 503 medically refractory patients with trigeminal neuralgia who underwent Gamma Knife surgery (GKS). The median patient age was 72 years (range 26–95 years). Prior surgery had failed in 205 patients (43%). The GKS typically was performed using MR imaging guidance, a single 4-mm isocenter, and a maximum dose of 80 Gy.
Results
Patients were evaluated for up to 16 years after GKS; 107 patients had > 5 years of follow-up. Eighty-nine percent of patients achieved initial pain relief that was adequate or better, with or without medications (Barrow Neurological Institute [BNI] Scores I–IIIb). Significant pain relief (BNI Scores I–IIIa) was achieved in 73% at 1 year, 65% at 2 years, and 41% at 5 years. Including Score IIIb (pain adequately controlled with medication), a BNI score of I–IIIb was found in 80% at 1 year, 71% at 3 years, 46% at 5 years, and 30% at 10 years. A faster initial pain response including adequate and some pain relief was seen in patients with trigeminal neuralgia without additional symptoms, patients without prior surgery, and patients with a pain duration of = 3 years. One hundred ninety-three (43%) of 450 patients who achieved initial pain relief reported some recurrent pain 3–144 months after initial relief (median 50 months). Factors associated with earlier pain recurrence that failed to maintain adequate or some pain relief were trigeminal neuralgia with additional symptoms and = 3 prior failed surgical procedures. Fifty-three patients (10.5%) developed new or increased subjective facial paresthesias or numbness and 1 developed deafferentation pain; these symptoms resolved in 17 patients. Those who developed sensory loss had better long-term pain control (78% at 5 years).
Conclusions
Gamma Knife surgery proved to be safe and effective in the treatment of medically refractory trigeminal neuralgia and is of value for initial or recurrent pain management. Despite the goal of minimizing sensory loss with this procedure, some sensory loss may improve long-term outcomes. Pain relapse is amenable to additional GKS or another procedure.
Resumo:
http://bjo.bmj.com/content/suppl/2001/06/20/85.7.DC1 Leukocyte-endothelial cell interactions play an important role in the pathogenesis of various types of retinal vascular diseases, including diabetes, uveitis, and ischemic lesions. Over the last few years, several methods have been devised in which the scanning laser ophthalmoscope (SLO) is used to study leukocyte-endothelial interactions in vivo [1,2]. Previously we reported a noninvasive in vivo leukocyte tracking method using the SLO in rat. In this method, a nontoxic fluorescent agent (6-carboxyfluorescein diacetate, CFDA) was used to label leukocytes in vitro. Leukocyte velocities within the retinal and choroidal circulations were be quantified simultaneously [3]. None of the previous methods has been developed for imaging the murine fundus, mainly due to problems arising from the small size of the mouse eye. However, there are many advantages of using a murine model to study retinal vascular diseases such as enhanced genetic definition, increased range of reagents available for immunological studies and cost reduction. We have developed our SLO method such that we can track leukocytes in the mouse retinal and choroidal circulations.
Resumo:
A local collaborative process was launched in Windsor, Ontario, Canada to explore the role of occupation as a risk factor for cancer. An initial hypothesis-generating study found an increased risk for breast cancer among women aged 55 years or younger who had ever worked in farming. On the basis of this result, a 2-year case–control study was undertaken to evaluate the lifetime occupational histories of women with breast cancer. The results indicate that women with breast cancer were nearly three times more likely to have worked in agriculture when compared to the controls (OR = 2.80 [95% CI, 1.6–4.8]). The risk for those who worked in agriculture and subsequently worked in automotive-related manufacturing was further elevated (OR = 4.0 [95% CI, 1.7–9.9]). The risk for those employed in agriculture and subsequently employed in health care was also elevated (OR = 2.3 [95% CI, 1.1–4.6]). Farming tended to be among the earlier jobs worked, often during adolescence. While this article has limitations including the small sample size and the lack of information regarding specific exposures, it does provide evidence of a possible association between farming and breast cancer. The findings indicate the need for further study to determine which aspects of farming may be of biological importance and to better understand the significance of timing of exposure in terms of cancer risk.
Resumo:
This study evaluated dietary habits of Northern Irish men who are at high risk of cardiovascular disease, stratified as never-, ex-, moderate-, or heavy-smokers. Participants were male volunteers (30 - 49 years) from a single workforce in Belfast (n = 765). Dietary information was collected using a validated food frequency questionnaire. For 'a priori' diet scores, never- and ex-smokers had a significantly higher fruit and vegetable score, Mediterranean diet score, and alternative Mediterranean diet score than moderate or heavy-smokers (all p