The effect of 3D weaving and consolidation on carbon fiber tows, fabrics, and composites

This article investigates the damage imparted on load-bearing carbon fibers during the 3D weaving process and the subsequent compaction behavior of 3D woven textile preforms. The 3D multi-layer reinforcements were manufactured on a textile loom with few mechanical modifications to produce preforms with fibers orientated in the warp, weft, and through-the-thickness directions. Tensile tests were conducted on three types of commercially available carbon fibers, 12k HTA, 6k HTS, and 3k HTS in an attempt to quantify the effect of fiber damage induced during the 3D weaving process on the mechanical and physical performance of the fiber tows in the woven composite. The tests were conducted on fiber tows sampled from different locations in the manufacturing process from the bobbin, through the creel and loom mechanism, to the final woven fabric. Mechanical and physical testing were then conducted to quantify the tow geometry, orientation and the effect of compaction during manufacture of two styles of 3D woven composite by vacuumassisted resin transfer molding (VaRTM).

Dublin docklands. The urban fabric as cultural heritage

Introduction

Since the 1980s there have been major policies and projects for the redevelopment of Dublin Docklands. These projects were mainly aimed at profitable development of office, commercial and residential space, without a sound plan that would preserve the identity or community of the area. The recent shift in policies and urban design principles in the Dublin Docklands Area Master Plan 2008 shows that policy makers have acknowledged that mistakes were made in the last decades of the 20th century. The current map of the Dublin Docklands Area Master Plan 2008 gives us useful information about these changes. The Ringsend/ Irishtown area, which has kept a great part of its urban form and community identity throughout centuries, is described as an ‘area of protection of residential and services amenities’ (DDDA, 2008, map A). Meanwhile, the area of the Grand Canal Docks, recently developed, is described with the objective ‘to seek the social, economic and physical development or rejuvenation
within an area of mixed use of which residential and enterprise facilities would be the predominant uses’ (DDDA, 2008, map A). This classification shows that recent development has been unable to achieve the cohesion and complexity of existing neighbourhoods, revealing flaws not only in policy, but also in the built environment and approaches to urban design.

The shift towards the consideration of more community participation reveals a need to understand the tradition and past of these communities, while the urban fabric of small plots in the existing neighbourhoods, therefore, seems to have a very important role in the conservation of identity of place and providing the opportunity for difference within regularity. On the other hand, the new fabric of residential block developments in the docklands denies the possibility of developing a sense of community, and by providing only regularity, does not leave space for difference.

This paper will address questions related to urban morphology and town analysis in the case of Ringsend and Irishtown. This will provide a tool to learn from the past and perhaps find new models of development that might be less detrimental for the heritage of cities and urban communities. One of the ideas of this paper is to adhere to the new tendency in conservation policies to provide a broader analysis of urban areas, not only considering individual monuments in cities, but also analysing the significance of urban morphology and intangible heritage. It forms part of an OPW Post- Doctoral Fellowship in Conservation Studies and Environmental History.1 Research has been carried out in different areas of urban history of Dublin’s southern waterfront, including infrastructure history and a thorough analysis of the letters of the Pembroke Estate of the 19th century, which included the areas of Ringsend and Irishtown. However, this paper focuses on the study of urban form of the area and its significance to Dublin’s heritage.

3-D micromechanical model for predicting the elastic behaviour of woven laminates

This paper presents an analytical model for the prediction of the elastic behaviour of plain-weave fabric composites. The fabric is a hybrid plain-weave with different materials and undulations in the warp and weft directions. The derivation of the effective material properties is based on classical laminate theory (CLT).

The theoretical predictions have been compared with experimental results and predictions using alternative models available in the literature. Composite laminates were manufactured using the resin infusion under flexible tooling (RIFT) process and tested under tension and in-plane shear loading to validate the model. A good correlation between theoretical and experimental results for the prediction of in-plane properties was obtained. The limitations of the existing theoretical models based on classical laminate theory (CLT) for predicting the out-of-plane mechanical properties are presented and discussed. 

Investigation of secure wireless regions using configurable beamforming on WARP

In this paper, we examine a novel approach to network security against passive eavesdroppers in a ray-tracing model and implement it on a hardware platform. By configuring antenna array beam patterns to transmit the data to specific regions, it is possible to create defined regions of coverage for targeted users. By adapting the antenna configuration according to the intended user’s channel state information, this allows the vulnerability of the physical regions to eavesdropping to be reduced. We present the application of our concept to 802.11n networks where an antenna array is employed at the access point. A range of antenna array configurations are examined by simulation and then realized using the Wireless Open-Access Research Platform(WARP)

Reconstructing the Social Fabric amid On-going Violence: Attitudes toward Reconciliation and Structural Transformation in Colombia

Given the increase of reconciliation processes initiated amid on-going violence, this study focuses on community reconciliation and its relation to structural transformation, or social reconstruction through reforming unjust institutions and practices that facilitate protracted violent conflict. Drawing lessons from the Caribbean coast of Colombia, mixed method analyses include eight in-depth interviews and 184 surveys. Four key dimensions of reconciliation – truth, justice, mercy, peace – are examined. In the interviews, participants prioritize reconstructing the truth and bringing perpetrators to justice as essential aspects of reconciliation. Notions of mercy and forgiveness are less apparent. For the participants, sustainable peace is dependent on structural transformation to improve livelihoods. These data, however, do not indicate how this understanding of reconciliation may relate to individual participation in reconciliation processes. Complementing the qualitative data, quantitative analyses identify some broad patterns that relate to participation in reconciliation events. Compared to those who did not participate, individuals who engaged in reconciliation initiatives report higher levels of personal experience with violence, live alongside demobilized paramilitaries, are more engaged in civic life, and express greater preference for structural transformation. The paper concludes with policy implications that integrate reconciliation and structural transformation to deepen efforts to rebuild the social fabric amid violence.

Denver - A City Profile

Denver has emerged from the 1990s as a city region experiencing rapid growth. This has been fuelled by a vibrant local economy, which has adjusted itself from dependency on an earlier oil boom to greater reliance on the information and communications technology sector. The current planning and development challenges are dominated by the need to deal with urban sprawl and pressured transportation infrastructure. The contemporary restructuring of the physical fabric of Denver is marked by a progressive downtown revitalisation effort and a number of space extensive brownfield development projects. The interplay of state and local governments with commercial interests and citizens is a powerful dynamic in shaping these negative and positive outcomes.

Numerical ‘health check’ for scientific codes: the CADNA approach

Scientific computation has unavoidable approximations built into its very fabric. One important source of error that is difficult to detect and control is round-off error propagation which originates from the use of finite precision arithmetic. We propose that there is a need to perform regular numerical `health checks' on scientific codes in order to detect the cancerous effect of round-off error propagation. This is particularly important in scientific codes that are built on legacy software. We advocate the use of the CADNA library as a suitable numerical screening tool. We present a case study to illustrate the practical use of CADNA in scientific codes that are of interest to the Computer Physics Communications readership. In doing so we hope to stimulate a greater awareness of round-off error propagation and present a practical means by which it can be analyzed and managed.

Creative Activism: a pedagogical and research tool

Environmental activism has a long history in protest, addressing issues of degradation and segregation that threaten existing ecologies, social and built fabrics. Environmental activism is traditionally understood as a reaction, chiefly by groups of people, against a perceived external threat. In the 60’s and 70’s, an activist stance began to emerge in the work of some artists and architects, who used creative methods such as performances, happenings, temporary spatial interventions etc to convey their political/aesthetic messages. Some of this work engaged directly with communities but predominantly it was the production of one individual working ‘outside’ society. However such actions demonstrated not only the power of the visual in conveying a political message but also the potential of conceptual creative approaches to reveal alternative values and hidden potentials. This marked a shift from activism as protestation towards an activism of reconceptualisation. Recently, activist groups have developed a more politically informed process. Whilst their ‘tools’ may resemble work from the 60’s and 70’s , their methodologies are non-traditional, ’rhizomatic’, pedagogical and fluid; working alongside, rather than against, the established power and funding structures. Such creative processes build new, often unexpected, stakeholder networks; offer neutral spaces in which contentious issues can be faced; and create better understanding of values and identities. They can also lead to permanent improvements and development in the physical fabric. This paper will discuss a pedagogical example of activism in architectural education. The event (www.fourdaysontheoutside.com) is in its fifth year of existence and as such has revealed a value and impulse beyond its learning and teaching value. The paper will discuss how the event contributes to the university’s outreach programme and how its structure acts as a seedbed for potential research projects and partnerships. UK Universities talk extensively about applied research but have few actual strategies by which to generate it. Fourdaysontheoutside offers some potential ways forward.