An Investigation of Fuzzy Multiple Heuristic Orderings in the Construction of University Examination Timetables

In this paper, we present an investigation into using fuzzy methodologies to guide the construction of high quality feasible examination timetabling solutions. The provision of automated solutions to the examination timetabling problem is achieved through a combination of construction and improvement. The enhancement of solutions through the use of techniques such as metaheuristics is, in some cases, dependent on the quality of the solution obtained during the construction process. With a few notable exceptions, recent research has concentrated on the improvement of solutions as opposed to focusing on investigating the ‘best’ approaches to the construction phase. Addressing this issue, our approach is based on combining multiple criteria in deciding on how the construction phase should proceed. Fuzzy methods were used to combine three single construction heuristics into three different pair wise combinations of heuristics in order to guide the order in which exams were selected to be inserted into the timetable solution. In order to investigate the approach, we compared the performance of the various heuristic approaches with respect to a number of important criteria (overall cost penalty, number of skipped exams, number of iterations of a rescheduling procedure required and computational time) on twelve well-known benchmark problems. We demonstrate that the fuzzy combination of heuristics allows high quality solutions to be constructed. On one of the twelve problems we obtained lower penalty than any previously published constructive method and for all twelve we obtained lower penalty than when any of the single heuristics were used alone. Furthermore, we demonstrate that the fuzzy approach used less backtracking when constructing solutions than any of the single heuristics. We conclude that this novel fuzzy approach is a highly effective method for heuristically constructing solutions and, as such, has particular relevance to real-world situations in which the construction of feasible solutions is often a difficult task in its own right.

Dual Sequence Simulated Annealing with Round-Robin Approach for University Course Timetabling

The university course timetabling problem involves assigning a given number of events into a limited number of timeslots and rooms under a given set of constraints; the objective is to satisfy the hard constraints (essential requirements) and minimize the violation of soft constraints (desirable requirements). In this study we employed a Dual-sequence Simulated Annealing (DSA) algorithm as an improvement algorithm. The Round Robin (RR) algorithm is used to control the selection of neighbourhood structures within DSA. The performance of our approach is tested over eleven benchmark datasets. Experimental results show that our approach is able to generate competitive results when compared with other state-of-the-art techniques.

Rotating Brains / Beating Heart:International collaborative performance with Stelarc, the virtual reality ensemble Avatar Orchestra Metaverse, Pauline Oliveros, Martin Parker and saxophonist Franziska Schroeder.

The work ROTATING BRAINS / BEATING HEART was specifically developed for the opening performance of the 2010 DRHA conference. The conference’s theme ‘Sensual Technologies: Collaborative Practices of Interdisciplinarity explored collaborative relationships between the body and sensual/sensing technologies across various disciplines, looking to new approaches offered by various emerging fields and practices that incorporate new and existing technologies. The conference had a specific focus on SecondLife with roundtable events and discussions, led by performance artist Stelarc, as well as international participation via SecondLife.
The collaboration between Stelarc, the Avatar Orchestra Metaverse (AOM) and myself as the DRHA2010 conference program chair was a unique occurrence for this conference.

“Building performance evaluation: The case of McClay Library”

The government of the UK has set an ambitious target that all newly built homes be carbon neutral by 2016 and to achieving an overall 80% carbon emission by 2050. Carbon Trust in 2009 published a research revealing that non-domestic buildings accounted for 18% of the emissions in the UK. They argued that to achieve the targets of low carbon emission there is need for better building stock that are better used. The evaluation of the performance of buildings is therefore critical if the understanding of how they are used is to be known. This paper is a brief building performance evaluation of the newly build library at Queens University Belfast carried out during the summer of 2010. It employed the Post-Occupancy Evaluation (POE) methodology to assess its performance. The results reveal that despite the intelligent technologies in the building there was a mismatch between the measured data and the perception of users of its performance. The study suggests the need for further study for reasons of dichotomy of the data. Keywords: building performance evaluation, carbon reduction strategies, passive environmental design techniques, active renewable energy technologies, Northern Ireland

The development of University Technology Transfer stakeholder relationships at a regional level: Lessons for the future

The increasing importance placed upon regional development and the knowledge-based economy as economic growth stimuli has led to a changing role for Universities and their interaction with the business community through (though not limited to) the transfer of technology from academia to industry. With the emergence of Local Enterprise Partnerships (LEPs) replacing the Regional Development Agencies (RDAs), there is a need for policy and practice going forward to be clearly informed by a critique of TTO (Technology Transfer Office)–RDA stakeholder relationship in a lessons learned approach so that LEPs can benefit from a faster learning curve. Thus, the aim of this paper is to examine the stakeholder relationship between three regional universities in the context of its TTO and the RDA with a view to determining lessons learned for the emerging LEP approach. Although the issues raised are contextual, the abstracted stakeholder conceptualisation of the TTO–RDA relationship should enable wider generalisation of the issues raised beyond the UK. Stakeholder theory relationship and stage development models are used to guide a repeat interview study of the TTO and RDA stakeholder groupings. The findings, interpreted using combined category and stage based stakeholder models, show how the longitudinal development of the TTO–RDA stakeholder relationship for each case has progressed through different stakeholder pathways, and stages where specific targeting of funding was dependant on the stakeholder stage. Greater targeted policy and funding, based on the stakeholder relationship approach, led to the development of joint mechanisms and a closer alignment of performance measures between the TTO and the RDA. However, over-reliance on the unitary nature of the TTO–RDA relationship may lead to a lack of cultivation and dependency for funding from other stakeholders.

Pharmacy Students’ Views of Faculty Feedback on Academic Performance

Objective: To investigate students' views on and satisfaction with faculty feedback on their academic performance.

Methods: A 41-item survey instrument was developed based on a literature review relating to effective feedback. All pharmacy undergraduate students were invited via e-mail to complete the self-administered electronic questionnaire relating to their views on feedback, including faculty feedback received to date regarding their academic performance.

Results: A response rate of 61% (343/561) was obtained. Only 32.3% of students (107/331) agreed that they were satisfied with the feedback they received; dissatisfaction with examination feedback was particularly high. The provision of faculty feedback was perceived to be variable in terms of quality and quantity.

Conclusions: There are some inconsistencies relating to provision of feedback within the MPharm degree program at Queen's University Belfast. Further work is needed to close the gap between student expectations and the faculty's delivery of feedback on academic performance.

Monitoring the performance of aerodrome ground lighting

This article provides an overview of a novel prototype device that can be used to aid airports in monitoring their landing lighting. Known as Aerodrome Ground Lighting (AGL), the device is comprised of a camera that is capable of capturing images of landing lighting as aircraft approach the airport. AGL is designed to automatically examine landing lighting to assess if it is operating under uniform brightness standards (i.e., luminous intensity of luminares) that aviation governing bodies require. A detailed discussion of the hardware and software requirements of AGL -- currently under joint development by researchers at Queens University Belfast and Cobham Flight Inspection Limited -- is presented. Results from the research indicate that assessing the performance of both ground-based runway luminaries and elevated approach luminaries is possible, though further testing is needed for full validation.

Does flexibility in secondary level mathematics curriculum affect degree performance?

The authors have much experience in developing mathematics skills of first-year engineering students and attempting to ensure a smooth transition from secondary school to university. Concerns exist due to there being flexibility in the choice of modules needed to obtain a secondary level (A-level) mathematics qualification. This qualification is based on some core (pure maths) modules and a selection from mechanics and statistics modules. A survey of aerospace and mechanical engineering students in Queen’s University Belfast revealed that a combination of both mechanics and statistics (the basic module in both) was by far the most popular choice and therefore only about one quarter of this cohort had studied mechanics beyond the basic module within school maths. Those students who studied the extra mechanics and who achieved top grades at school subsequently did better in two core, first-year engineering courses. However, students with a lower grade from school did not seem to gain any significant advantage in the first-year engineering courses despite having the extra mechanics background. This investigation ties in with ongoing and wider concerns with secondary level mathematics provision in the UK.

“I miss being spoon-fed”. A comparison of transition from school to university education from the perspective of undergraduate pharmacy students

Background: The transition from school to university can be challenging and there is increasing concern among academics that students are inadequately prepared for entry to university courses.Aims: To investigate students’ views on transition from school to university education.Method: A focus group was conducted with first-year students and analysed using thematic analysis. Students were invited to participate in an electronic questionnaire; responses were analysed via SPSS for Windows. The Mann– Whitney U test was utilised with p<0.05 set as significant.Results: A response rate of 60% (88/147) was obtained for the questionnaire. Differences included staff-student interactions, learning methods, examination preparation and feedback provision. Many (85%) agreed that the main emphasis in school was on examination preparation; 29.6% considered this to be the case at university (z=-8.315; p<0.05). Most students (95.4%) considered the feedback they received at school helped improve performance; this decreased to 50% when asked about feedback at university (z=-8.326; p<0.05).Conclusion: Students appear to be insufficiently prepared for the demands of higher education. They desire various aspects of their university educational experience to be more akin to that of school, including: a greater level of individual attention, increased access to teaching staff, and further clarification and transparency about the standard required to pass exams. Further work can now be done by academic staff to aid the transition and improve the learning experience.

A-level Mathematics Module Choice and Subsequent Performance in First Year of an Engineering Degree

The A-level Mathematics qualification is based on a compulsory set of pure maths modules and a selection of applied maths modules. The flexibility in choice of applied modules has led to concerns that many students would proceed to study engineering at university with little background in mechanics. A survey of aerospace and mechanical engineering students in our university revealed that a combination of mechanics and statistics (the basic module in both) was by far the most popular choice of optional modules in A-level Mathematics, meaning that only about one-quarter of the class had studied mechanics beyond the basic module within school mathematics. Investigation of student performance in two core, first-year engineering courses, which build on a mechanics foundation, indicated that any benefits for students who studied the extra mechanics at school were small. These results give concern about the depth of understanding in mechanics gained during A-level Mathematics.