Unidirectional hybridization at a species' range boundary: implications for habitat tracking

Aim Introgressive hybridization between a locally rare species and a more abundant congener can drive population extinction via genetic assimilation, or the replacement of the rare species gene pool with that of the common species. To date, however, few studies have assessed the effects of such processes at the limits of species' distribution ranges. In this study, we have examined the potential for hybridization between range-edge populations of the wintergreen Pyrola minor and sympatric populations of Pyrola grandiflora. Location Qeqertarsuaq, Greenland and Churchill, Manitoba, Canada. Methods Genetic analysis of samples from Greenland and Canada was carried out using a combination of nuclear and chloroplast single nucleotide polymorphisms (SNPs). Results Analysis of nuclear SNPs confirmed hybridization in populations of morphologically intermediate individuals, as well as revealing the existence of cryptic hybrids in ostensibly morphologically pure P. minor populations. Analysis of chloroplast SNPs revealed that this hybridization is unidirectional and suggests that hybrids originate via pollen swamping of P. minor by the more common P. grandiflora. Main conclusions Extensive unidirectional hybridization may lead to the extinction of peripheral populations of P. minor where the two species grow sympatrically. Extinction could occur as a result of genetic assimilation where F1s are fertile, or via the removal of unidirectionally pollinated sterile F1s, or by a combination of these processes. This could compromise the ability of species to respond to climate change via habitat tracking, although the final outcome of these processes may ultimately depend on the rate of global climate change and its effect on the species' distributions. © 2009 Blackwell Publishing Ltd.

Amplified optomechanics in a unidirectional ring cavity

We investigate optomechanical forces on a nearly lossless scatterer, such as an atom pumped far off-resonance or amicromirror, inside an optical ring cavity. Our model introduces two additional features to the cavity: an isolator is used to prevent circulation and resonant enhancement of the pump laser field and thus to avoid saturation of or damage to the scatterer, and an optical amplifier is used to enhance the effective Q-factor of the counterpropagating mode and thus to increase the velocity-dependent forces by amplifying the back-scattered light. We calculate friction forces, momentum diffusion, and steady-state temperatures to demonstrate the advantages of the proposed setup.

USE OF UNIDIRECTIONAL DATA FLOW IN BIT-LEVEL SYSTOLIC ARRAY CHIPS.

We show how the architecture of two recently reported bit-level systolic array circuits - a single-bit coefficient correlator and a multibit convolver - may be modified to incorporate unidirectional data flow. This feature has advantages in terms of chip cascadability, fault tolerance and possible wafer-scale integration.

Does unidirectional vesicular transport occur in retinal vessels?

This paper challenges the hypothesis that the smooth 80 nm plasmalemmal caveolae found in abundance at the abluminal aspect of the endothelium in retinal blood vessels participate in a unidirectional vesicular transport mechanism. Evidence is presented which indicates that horseradish peroxidase, when introduced to the extracellular space of the retina via the vitreous body, may enter the intravascular compartment through junctional incompetence which occurs at or after enucleation of the eye. It is proposed that the plasmalemmal caveolae at the abluminal plasma membrane of endothelial cells in retinal blood vessels are static structures which facilitate the transport of small solutes and ions across the blood retinal barrier.

Unidirectional suppression of hydrogen oxidation on oxidized platinum clusters

Solar-driven water splitting to produce hydrogen may be an ideal solution for global energy and environment issues. Among the various photocatalytic systems, platinum has been widely used to co-catalyse the reduction of protons in water for hydrogen evolution. However, the undesirable hydrogen oxidation reaction can also be readily catalysed by metallic platinum, which limits the solar energy conversion efficiency in artificial photosynthesis. Here we report that the unidirectional suppression of hydrogen oxidation in photocatalytic water splitting can be fulfilled by controlling the valence state of platinum; this platinum-based cocatalyst in a higher oxidation state can act as an efficient hydrogen evolution site while suppressing the undesirable hydrogen back-oxidation. The findings in this work may pave the way for developing other high-efficientcy platinum-based catalysts for photocatalysis, photoelectrochemistry, fuel cells and water-gas shift reactions.

A small supramolecular system which emulates the unidirectional, path-selective photoinduced electron transfer (PET) of the bacterial photosynthetic reaction centre (PRC)

The singlet excited state of the 4-aminonaphthalimide fluorophore in 1a and 1b directs electron transfer from intramolecular but external amine groups along only one of two available paths.

The direction aftereffect is driven by adaptation of local motion detectors

The processing of motion information by the visual system can be decomposed into two general stages; point-by-point local motion extraction, followed by global motion extraction through the pooling of the local motion signals. The direction aftereVect (DAE) is a well known phenomenon in which prior adaptation to a unidirectional moving pattern results in an exaggerated perceived direction diVerence between the adapted direction and a subsequently viewed stimulus moving in a diVerent direction. The experiments in this paper sought to identify where the adaptation underlying the DAE occurs within the motion processing hierarchy. We found that the DAE exhibits interocular transfer, thus demonstrating that the underlying adapted neural mechanisms are binocularly driven and must, therefore, reside in the visual cortex. The remaining experiments measured the speed tuning of the DAE, and used the derived function to test a number of local and global models of the phenomenon. Our data provide compelling evidence that the DAE is driven by the adaptation of motion-sensitive neurons at the local-processing stage of motion encoding. This is in contrast to earlier research showing that direction repulsion, which can be viewed as a simultaneous presentation counterpart to the DAE, is a global motion process. This leads us to conclude that the DAE and direction repulsion reflect interactions between motion-sensitive neural mechanisms at different levels of the motion-processing hierarchy.

Classifying Network Protocols: A ‘2 Way’ Flow Approach

The identification and classification of network traffic and protocols is a vital step in many quality of service and security systems. Traffic classification strategies must evolve, alongside the protocols utilising the Internet, to overcome the use of ephemeral or masquerading port numbers and transport layer encryption. This research expands the concept of using machine learning on the initial statistics of flow of packets to determine its underlying protocol. Recognising the need for efficient training/retraining of a classifier and the requirement for fast classification, the authors investigate a new application of k-means clustering referred to as 'two-way' classification. The 'two-way' classification uniquely analyses a bidirectional flow as two unidirectional flows and is shown, through experiments on real network traffic, to improve classification accuracy by as much as 18% when measured against similar proposals. It achieves this accuracy while generating fewer clusters, that is, fewer comparisons are needed to classify a flow. A 'two-way' classification offers a new way to improve accuracy and efficiency of machine learning statistical classifiers while still maintaining the fast training times associated with the k-means.

Translating evidence into practice: A shared priority in public health?

Translational and transdisciplinary research is needed to tackle complex public health problems. This article has three aims. Firstly, to determine how academics and non-academics (practitioners, policy makers and community workers) identified with the goals of the UKCRC Centre of Excellence for Public Health in Northern Ireland and how their attitudes varied in terms of knowledge brokerage and translation. Secondly, to map and analyse the network structure of the public health sector and the placement of the Centre within this. Thirdly, to aggregate responses from members of the network by work setting to construct the trans-sectoral network and devise the Root Mean Sum of Squares to determine the quality and potential value of connections across this network.The analysis was based on data collected from 98 individuals who attended the launch of the Centre in June 2008. Analysis of participant expectations and personal goals suggests that the academic members of the network were more likely to expect the work of the Centre to produce new knowledge than non-academics, but less likely to expect the Centre to generate health interventions and influence health policy. Academics were also less strongly oriented than non-academics to knowledge transfer as a personal goal, though more confident that research findings would be diffused beyond the immediate network. A central core of five nodes is crucial to the overall configuration of the regional public health network in Northern Ireland, with the Centre being well placed to exert influence within this. Though the overall network structure is fairly robust, the connections between some component parts of the network - such as academics and the third sector - are unidirectional.Identifying these differences and core network structure is key to translational and transdisciplinary research. Though exemplified in a regional study, these techniques are generalisable and applicable to many networks of interest: public health, interdisciplinary research or organisational involvement and stakeholder linkage.

The influence of wear paths produced by hip replacement patients during normal walking on wear rates

Variation in wear paths is known to greatly affect wear rates in vitro, with multidirectional paths producing much greater wear than unidirectional paths. This study investigated the relationship between multidirectional motion at the hip joint, as measured by aspect ratio, sliding distance, and wear rate for 164 hip replacements. Kinematic input from three-dimensional gait analysis was used to determine the wear paths. Activity cycles were determined for a subgroup of 100 patients using a pedometer study, and the relationship between annual sliding distance and wear rate was analyzed. Poor correlations were found between both aspect ratio and sliding distance and wear rate for the larger group and between annual sliding distance and wear rate for the subgroup. However, patients who experienced a wear rate <0.08 mm/year showed a strong positive correlation between the combination of sliding distance, activity levels, and aspect ratio and wear rate (adjusted r2?=?55.4%). This group may represent those patients who experience conditions that most closely match those that prevail in simulator and laboratory tests. Although the shape of wear paths, their sliding distance, and the number of articulation cycles at the hip joint affect wear rates in simulator studies, this relationship was not seen in this clinical study. Other factors such as lubrication, loading conditions and roughness of the femoral head may influence the wear rate.

Sensing Spaces:A Body-oriented Architectural Design Education

The contemporary dominance of visuality has turned our understanding of space into a mode of unidirectional experience that externalizes other sensual capacities of the body while perceiving the built environment. This affects not only architectural practice but also architectural education when an introduction to the concept of space is often challenging, especially for the students who have limited spatial and sensual training. Considering that an architectural work is not perceived as a series of retinal pictures but as a repeated multi-sensory experience, the problem definitions in the design studio need to be disengaged from the dominance of a ‘focused vision’ and be re-constructed in a holistic manner. A method to address this approach is to enable the students to refer to their own sensual experiences of the built environment as a part of their design processes. This paper focuses on a particular approach to the second year architectural design teaching which has been followed in the Department of Architecture at Izmir University of Economics for the last three years. The very first architectural project of the studio and the program, entitled ‘Sensing Spaces’, is conducted as a multi-staged design process including ‘sense games, analyses of organs and their interpretations into space’. The objectives of this four-week project are to explore the sense of space through the design of a three-dimensional assembly, to create an awareness of the significance of the senses in the design process and to experiment with re-interpreted forms of bodily parts. Hence, the students are encouraged to explore architectural space through their ‘tactile, olfactory, auditory, gustative and visual stimuli’. In this paper, based on a series of examples, architectural space is examined beyond its boundaries of structure, form and function, and spatial design is considered as an activity of re-constructing the built environment through the awareness of bodily senses.

Autoclave Cure Simulation of Composite Structures Applying Implicit and Explicit FE

Simulation of the autoclave manufacturing technique of composites can yield a preliminary estimation of induced residual thermal stresses and deformations that affect component fatigue life, and required tolerances for assembly. In this paper, an approach is proposed to simulate the autoclave manufacturing technique for unidirectional composites. The proposed approach consists of three modules. The first module is a Thermo-chemical model to estimate the temperature and the degree of cure distributions in the composite part during the cure cycle. The second and third modules are a sequential stress analysis using FE-Implicit and FE-Explicit respectively. User-material subroutine is used to model the Viscoelastic properties of the material based on theory of micromechanics.

Fatigue Damage of Composite Structures Applying a Micromechanical Approach

Fatigue damage calculations of unidirectional polymer composites is presented applying micromechanics theory. An orthotropic micromechanical damage model is integrated with an isotropic fatigue evolution model to predict the micromechanical fatigue damage of the composite structure. The orthotropic micromechanical damage model is used to predict the orthotropic damage evolution within a single cycle. The isotropic fatigue model is used to predict the magnitude of fatigue damage accumulated as a function of the number of cycles. The advantage of using this approach is the cheap determination of model parameters since the orthotropic damage model parameters can be determined using available data from quasi-static loading tests. Decomposition of the state variables down to the constituent scale is accomplished by micromechanics theory. Phenomenological damage evolution models are then postulated for each constituent and for interphase among them. Comparison between model predictions and experimental data is presented.

Virtual Manufacturing of Composite Structures Applying Implicit and Explicit FE Techniques

Virtual manufacturing of composites can yield an initial early estimation of the induced residual thermal stresses that affect component fatigue life, and deformations that affect required tolerances for assembly. Based on these estimation, the designer can make early decisions, which can help in reducing cost, regarding changes in part design or material properties. In this paper, an approach is proposed to simulate the autoclave manufacturing technique for unidirectional composites. The proposed approach consists of three modules. The first module is a Thermochemical model to estimate temperature and the degree of cure distributions in the composite part during the cure cycle. The second and third modules are stress analysis using FE-Implicit and FE-Explicit respectively. User-material subroutine will be used to model the Viscoelastic properties of the material based on micromechanical theory. Estimated deformation of the composite part can be corrected during the autoclave process by modifying the process-tool design. The deformed composite surface is sent to CATIA for design modification of the process-tool.