The Critical Reading of the Images Associated with Science-Related News Reports: Establishing a knowledge, skills, and attitudes framework

For the majority of adults, the media constitute their main source of information about science and science-related matters impacting on society. To help prepare young people to engage with science in the media, teachers are being exhorted to equip their students with the knowledge, skills, and attitudes to respond critically to science-related news reports. Typically, such reports comprise not only text, but also visual elements. These images are not simply adjuncts to the written word; they are integral to meaning-making. Though science teachers make considerable use of newspaper images, they tend to view these representations unproblematically, underestimating their potential ambiguity, complexity, and role in framing media messages. They rarely aim to develop students’ ability to ‘read’, critically, such graphics. Moreover, research into how this might be achieved is limited and, consequently, research-informed guidance which could support this instruction is lacking. This paper describes a study designed to formulate a framework for such teaching. Science communication scholars, science journalists and media educators with acknowledged relevant expertise were surveyed to ascertain what knowledge, skills, and attitudes they deemed useful to engagement with science related news images. Their proposals were recast as learning intentions (instructional objectives), and science and English teachers collaborated to suggest which could be addressed with secondary school students and the age group best suited to their introduction. The outcome is an inventory of learning intentions on which teachers could draw to support their planning of instructional sequences aimed at developing students’ criticality in respect of the totality of science news reports.

Scaling of the entanglement spectrum near quantum phase transitions

The entanglement spectrum describing quantum correlations in many-body systems has been recently recognized as a key tool to characterize different quantum phases, including topological ones. Here we derive its analytically scaling properties in the vicinity of some integrable quantum phase transitions and extend our studies also to nonintegrable quantum phase transitions in one-dimensional spin models numerically. Our analysis shows that, in all studied cases, the scaling of the difference between the two largest nondegenerate Schmidt eigenvalues yields with good accuracy critical points and mass scaling exponents.

The importance of the gestation period for welfare of lambs: Maternal stressors and lamb vigour and wellbeing

The prenatal period is of critical importance in defining how individuals respond to their environment throughout life. Stress experienced by pregnant females has been shown to have detrimental effects on offspring behaviour, health and productivity. The sheep has been used extensively as a model species to inform human studies. However, in the farmed environment, the consequences for the lamb of the imposition of prenatal stresses upon the ewe have received much less attention. The stressors that pregnant ewes are most frequently exposed to include sub-optimal nutrition and those related to housing, husbandry and environment which may be either acute or chronic. A systematic review of the literature was adopted to identify material which had production-relevant maternal stressors and lamb outcomes. The current review focussed upon the lamb up to weaning around the age of 100 days and the results clearly demonstrate that stressors imposed upon the ewe have implications for offspring welfare and performance. Maternal under-nutrition (UN) in the last third of pregnancy consistently impaired lamb birth-weight and subsequent vigour and performance, while earlier UN had a variable effect on performance. Feeding the ewe above requirements did not have positive effects on lamb performance and welfare. Social and husbandry stressors such as transport, shearing, mixing and physiological treatments designed to mimic acute stress which would be considered disadvantageous for the ewe had positive or neutral effects for the lamb, highlighting a potential conflict between the welfare of the ewe and her lamb. This review also identified considerable gaps in knowledge, particularly in respect of the impact of disease upon the ewe during pregnancy and interactions between different stressors and the responses of ewe and lamb.

The effects of the specific adsorption of anion on the reactivity of the Ru(0001) surface towards CO adsorption and oxidation: in situ FTIRS studies

The dynamics of adsorption and oxidation of CO on Ru(0001) electrode in sulfuric acid solution have been studied using in situ FTIR spectroscopy under potential control and at open circuit, the latter at 20 and 55 degrees C. The in situ IR data show clearly that the bisulfate anion adsorbs on the Ru(0001) surface over the potential range from -200 mV to 350 mV (vs. Ag/AgCl) at 20 degrees C in the absence and presence of adsorbed CO; however, increasing the temperature to 55 degrees C and/ or increasing the concentration of dissolved O-2 reduces the bisulfate adsorption. The formation of surface (hydro-) oxide at higher potentials replaces the bisulfate adsorbates. Both linear (COL) and three-fold hollow bonded CO (COH) adsorbates were produced following CO adsorption at Ru(0001) in H2SO4, as was observed in our previous studies in HClO4. However, the amount of adsorbed CO observed in H2SO4 was ca. 10% less than that in HClO4; in addition, the COL and COH frequencies were higher in H2SO4, and the onset potential for COads oxidation 25 mV lower. These new results are interpreted in terms of a model in which the adsorbed bisulfate weakens the CO adlayer, allowing the active Ru oxide layer to form at lower potentials. Significantly different results were observed at open circuit in H2SO4 compared both to the data under potential control and to our earlier data in HClO4, and these observations were rationalized in terms of the adsorbed HSO4- anions (pre-adsorbed at -200 mV) inhibiting the oxidation of the surface at open circuit (after stepping from the initial potential of -200 mV), as the latter was no longer driven by the imposed electrochemical potential but via chemical oxidation by trace dissolved O-2. Results from experiments at open circuit at 55 degrees C and using oxygen-saturated H2SO4 supported this model. The difference in Ru surface chemistry between imposed electrochemical control and chemical control has potential implications with respect to fuel cell electrocatalysis.

Modal Representation of the Resonant Body within a Finite Difference Framework for Simulation of String Instruments

This paper investigates numerical simulation of a string coupled
transversely to a resonant body. Starting from a complete nite
difference formulation, a second model is derived in which the
body is represented in modal form. The main advantage of this hybrid form is that the body model is scalable, i.e. the computational
complexity can be adjusted to the available processing power. Numerical results are calculated and discussed for simplied models
in the form of string-string coupling and string-plate coupling.

Selectivity fields: comparative molecular field analysis (CoMFA) of the glycine/NMDA and AMPA receptors

An approach for evaluation of binding selectivity was suggested and exemplified using glycine/NMDA and AMPA receptors. For analyzing the pairwise selectivity, we propose to use the difference between biological activities (expressed as -log Ki) of ligands with respect to different receptor subtypes as a dependent variable for building comparative molecular field analysis (CoMFA) models. The resulting fields (which will be referred to as the "selectivity fields") indicate the ways of increasing selectivity of binding, inhibition, etc. As an example, CoMFA of a set of pyrazolo[1,5-c]quinazolines and triazolo[1,5-c]quinazolines was used for considering the binding selectivity with respect to glycine/NMDA and AMPA receptors. In addition, the mapping of these fields onto the molecular models of the corresponding receptors makes it possible to reveal the reasons for experimentally observed selectivity as well as to suggest additional ways of increasing selectivity.

Fracture strength of machined ceramic crowns as a function of tooth preparation design and the elastic modulus of the cement

Objectives: To determine, by means of static fracture testing the effect of the tooth preparation design and the elastic modulus of the cement on the structural integrity of the cemented machined ceramic crown-tooth complex. 
Methods: Human maxillary extracted premolar teeth were prepared for all-ceramic crowns using two preparation designs; a standard preparation in accordance with established protocols and a novel design with a flat occlusal design. All-ceramic feldspathic (Vita MK II) crowns were milled for all the preparations using a CAD/CAM system (CEREC-3). The machined all-ceramic crowns were resin bonded to the tooth structure using one of three cements with different elastic moduli: Super-Bond C&B, Rely X Unicem and Panavia F 2.0. The specimens were subjected to compressive force through a 4 mm diameter steel ball at a crosshead speed of 1 mm/min using a universal test machine (Loyds Instrument Model LRX.). The load at the fracture point was recorded for each specimen in Newtons (N). These values were compared to a control group of unprepared/unrestored teeth. 
Results: There was a significant difference between the control group, with higher fracture strength, and the cemented samples regardless of the occlusal design and the type of resin cement. There was no significant difference in mean fracture load between the two designs of occlusal preparation using Super-Bond C&B. For the Rely X Unicem and Panavia F 2.0 cements, the proposed preparation design with a flat occlusal morphology provides a system with increased fracture strength. 
Significance: The proposed novel flat design showed less dependency on the resin cement selection in relation to the fracture strength of the restored tooth. The choice of the cement resin, with respect to its modulus of elasticity, is more important in the anatomic design than in the flat design. © 2013 Academy of Dental Materials.

Sovereignty, Article 4(2) TEU and the Respect of National Identities: Swinging the Balance of Power in Favour of the Member States?

The question of whether and to what extent sovereignty has been transferred to the European Union (EU) from its Member States remains a central debate within the EU and is interlinked with issues such as Kompetenz-Kompetenz, direct effect and primacy. Central to any claim to sovereignty is the principle of primacy, which requires that Member States uphold EU law over national law where there is a conflict. However, limitations to primacy can traditionally be found in national jurisprudence and the Maastricht Treaty introduced a possible EU limitation with the requirement that the EU respect national identities of Member States. The Lisbon Treaty provided only minimal further support to the principle of primacy whilst simultaneously developing the provision on national identities, now found within Article 4(2) TEU. There are indications from the literature, national constitutional courts and the Court of Justice of the EU that the provision is gathering strength as a legal tool and is likely to have a wider scope than the text might indicate. In its new role, Article 4(2) TEU bolsters the Member States’ claim to sovereignty and the possibility to uphold aspects crucial to them in conflict with EU law and the principle of primacy. Consequently, it is central to the relationship between the constitutional courts of the Member States and the CJEU, and where the final elements of control remain in ‘hard cases’. However, it does so as part of EU law, thereby facilitating the evasion of direct fundamental conflicts and reflecting the concept of constitutional pluralism.