Development and Longer Term In Situ Evaluation of Fiber-Optic Sensors for Monitoring of Structural Concrete

In this paper, new solutions to the problem of making measurements, of carbonation and chloride ingress, in particular, in concrete structures are considered. The approach has focused on the design, development, and use of fiber-optic sensors (FOSs), recognizing the need in that conventional devices are often either inaccurate, expensive, or unsuitable for encapsulation in the material. The sensors have been designed to monitor, in situ and nondestructively, relevant physical, and chemical changes in cementitious materials. Three different types of FOS were constructed, tested, and evaluated specifically for this application, these being a temperature sensor (based on the fluorescence decay) and pH and chloride sensors, based on sol-gel (solidified gel) technology with appropriate impregnated indicators. The sensors were all designed to be inserted into the structures and evaluated under the harshest conditions, i.e., being mounted when the mortar is poured and thus tested in situ, with the temperature and pH sensors successfully embedded in mortar. The outcomes of these tests have shown that both the temperature sensor and the pH sensor were able to function correctly for the duration of the work - for over 18 months after placement. The laboratory tests on the chloride sensor showed it was able to make measurements but was not reversible, limiting its potential utility for in situ environments. Research is ongoing to refine the sensor performance and extend the testing.

Determination of the Physical Properties of Room Temperature Ionic Liquids Using a Love Wave Device

In this work, we have shown that a 100 MHz Love wave device can be used to determine whether room temperature ionic liquids (RTILs) are Newtonian fluids and have developed a technique that allows the determination of the density-viscosity product, rho eta of a Newtonian RTIL. In addition, a test for a Newtonian response was established by relating the phase change to insertion loss change. Five concentrations of a water-miscible RTIL and seven pure RTILs were measured. The changes in phase and insertion loss were found to vary linearly with the square root of the density-viscosity product for values up to (rho eta)(1/2) similar to 10 kg m(-2) s(-1/2). The square root of the density-viscosity product was deduced from the changes in either phase or insertion loss using glycerol as a calibration liquid. In both cases, the deduced values of rho eta agree well with those measured using viscosity and density meters. Miniaturization of the device, beyond that achievable with the lower-frequency quartz crystal microbalance approach, to measure smaller volumes is possible. The ability to fabricate Love wave and other surface acoustic wave sensors using planar metallization technologies gives potential for future integration into lab-on-a-chip analytical systems for characterizing ionic liquids.

Response characteristics of optical sensors for oxygen: models based on a distribution in tau(o) or kappa(q)

The features of two popular models used to describe the observed response characteristics of typical oxygen optical sensors based on luminescence quenching are examined critically. The models are the 'two-site' and 'Gaussian distribution in natural lifetime, tau(o),' models. These models are used to characterise the response features of typical optical oxygen sensors; features which include: downward curving Stern-Volmer plots and increasingly non-first order luminescence decay kinetics with increasing partial pressures of oxygen, pO(2). Neither model appears able to unite these latter features, let alone the observed disparate array of response features exhibited by the myriad optical oxygen sensors reported in the literature, and still maintain any level of physical plausibility. A model based on a Gaussian distribution in quenching rate constant, k(q), is developed and, although flawed by a limited breadth in distribution, rho, does produce Stern-Volmer plots which would cover the range in curvature seen with real optical oxygen sensors. A new 'log-Gaussian distribution in tau(o) or k(q)' model is introduced which has the advantage over a Gaussian distribution model of placing no limitation on the value of rho. Work on a 'log-Gaussian distribution in tau(o)' model reveals that the Stern-Volmer quenching plots would show little degree in curvature, even at large rho values and the luminescence decays would become increasingly first order with increasing pO(2). In fact, with real optical oxygen sensors, the opposite is observed and thus the model appears of little value. In contrast, a 'log-Gaussian distribution in k(o)' model does produce the trends observed with real optical oxygen sensors; although it is technically restricted in use to those in which the kinetics of luminescence decay are good first order in the absence of oxygen. The latter model gives a good fit to the major response features of sensors which show the latter feature, most notably the [Ru(dpp)(3)(2+)(Ph4B-)(2)] in cellulose optical oxygen sensors. The scope of a log-Gaussian model for further expansion and, therefore, application to optical oxygen sensors, by combining both a log-Gaussian distribution in k(o) with one in tau(o) is briefly discussed.

Monitoring the moisture transport in building stones using fibre optic relative humidity sensors

Weathering of stone is one of the major reasons for the damage of stone masonry structures and it takes place due to interlinked chemical, physical and biological processes in stones. The key parameters involved in the deterioration processes are temperature, moisture and salt. It is now known that the sudden variations in temperature and moisture greatly accelerate the weathering process of the building stone fabric. Therefore, in order to monitor these sudden variations an effective and continuous monitoring system is needed. Furthermore, it must consist of robust sensors which are accurate and can survive in the harsh environments experienced in and around masonry structures. Although salt penetration is important for the rate of deterioration of stone masonry structures, the processes involved are much slower than the damage associated with temperature and moisture variations. Therefore, in this paper a novel fibre optic temperature cum relative humidity sensor is described and its applicability in monitoring building stones demonstrated. The performance of the sensor is assessed in an experiment comprising wetting and drying of limestone blocks. The results indicate that the novel fibre optic relative humidity sensor which is tailor made for applications in masonry structures performed well in wetting and drying tests, whilst commercial capacitance based sensors failed to recover during the drying regime for a long period after a wetting regime. That is, the fibre optic sensor has the capability to measure both sorption and de-sorption characteristics of stone blocks. This sensor is used in a test wall in Oxford and the data thus obtained strengthened the laboratory observations.

Study of reliability of fibre Bragg grating fibre optic strain sensors for field-test applications

In this paper, the reliability and thus the suitability of optical fibre strain sensors for surface strain measurement in concrete structures was investigated. Two different configurations of optical strain sensors were used each having different mountings making them suitable for different uses in various structures. Due to the very limited time available to install the sensors and take result, commercially packaged sensors were used. In the tests carried out each sensor was mounted onto a concrete beam which was then subjected to a range of known and calibrated loadings. The performance of the optical strain sensors thus evaluated was compared with the results of conventional techniques. This comparison allows for selecting the best performing combination of sensor/mounting, i.e. long-gauge sensor with mounts bolted to threaded rods glued into the concrete for use in future work in a field test where a limited time window was available for installation, testing and post-test demounting. © 2012 Elsevier B.V.

Exploring the use of physical activity loyalty cards for behaviour change in public health: randomised controlled trial

Abstract
Background Physical inactivity is a major public health concern, and more innovative approaches are urgently needed to address it. The UK Government supports the use of incentives and so-called nudges to encourage healthy behaviour changes, and has encouraged business sector involvement in public health through the Public Health Responsibility Deal. To test the effectiveness of provision of incentives to encourage adults to increase their physical activity, we
recruited 406 adults from a workplace setting (office-based) to take part in an assessor-blind randomised controlled trial.
Methods
We developed the physical activity loyalty card scheme, which integrates a novel physical activity tracking system with web-based monitoring (palcard). Participants were recruited from two buildings at Northern Ireland’s main
government offices and were randomly allocated (grouped by building [n=2] to reduce contamination) to either incentive group (n=199) or no incentive group (n=207). We included participants aged 16–65 years, based at the worksite 4 days or more per week and for 6 h or more per day, and able to complete 15 min of moderate-paced walking (self-report). Exclusion criteria included having received specific advice by a general practitioner not to exercise. A statistician not involved in administration of the trial prepared a computer-generated random allocation sequence. Random assignments were placed in individually numbered, sealed envelopes by the statistician to ensure concealment of allocation. Only the assessor was masked to assignment. Sensors were placed along footpaths and the gym in the workplace. Participants scanned their loyalty card at the sensor when undertaking physical activity (eg, walking), which logged activity. Participants in the incentive group monitored their physical activity, collected points, and received rewards (retail vouchers) for minutes of physical activity completed over the 12-week intervention. Rewards were vouchers sponsored by local retailers. Participants in the no incentive group used their loyalty card to self-monitor their physical activity but were not able to earn points or receive rewards. The primary outcome was change in minutes of moderate to vigorous physical activity with the Global Physical Activity Questionnaire, measured at baseline, week 12, and 6 months. Activity was objectively measured with the tracking system over the 12-week intervention. Mann Whitney U tests were done to assess change between groups.
Findings
The mean age of participants was 43·32 years (SD 9·37), and 272 (67%) were women. We obtained follow-up data from 353 (87%) participants at week 12 and 341 (84%) at 6 months. At week 12, participants in the incentive group increased moderate to vigorous physical activity by a median of 60 min per week (IQR –10 to 120) compared with 30 min per week (–60 to 90) in the no incentive group (p=0·05). At 6 months, participants in the incentive group had
increased their moderate to vigorous physical activity by 30 min per week (–60 to 100) from baseline compared with 0 min per week (–115 to 1110) in the no incentive group (p=0·099). We noted no significant differences between groups
for use of loyalty card (p=0·18). Participants in the incentive group recorded a mean of 60·22 min (95% CI 50·90–69·55) of physical activity per week with their loyalty card on week 1 and 23·56 min (17·06–30·06) at week 12, which was similar to that for those in the no incentive group (59·74 min, 51·24–68·23, at week 1; 20·25 min, 14·45–26·06, at week 12; p=0·94 for differences between groups at week 1; p=0·45 for differences between groups at week 12).
Interpretation:
Financial incentives showed a short-term behaviour change in physical activity. This innovative study contributes to the necessary evidence base, and has important implications for physical activity promotion and business engagement in health. The optimum incentive-based approach needs to be established. Results should be interpreted with some caution as the analyses of secondary outcomes were not adjusted for multiple comparisons.

Design guidelines for developing customised serious games for parkinson's disease rehabilitation using bespoke game sensors

The research presented in this paper proposes a set of design guidelines in the context of a Parkinson's Disease (PD) rehabilitation design framework for the development of serious games for the physical therapy of people with PD. The game design guidelines provided in the paper are informed by the study of the literature review and lessons learned from the pilot testing of serious games designed to suit the requirements of rehabilitation of patients with Parkinson's Disease. The proposed PD rehabilitation design framework employed for the games pilot testing utilises a low-cost, customized and off-the-shelf motion capture system (employing commercial game controllers) developed to cater for the unique requirement of the physical therapy of people with PD. Although design guidelines have been proposed before for the design of serious games in health, this is the first research paper to present guidelines for the design of serious games specifically for PD motor rehabilitation.

Physical activity assessment in cystic fibrosis: A position statement

Background

The aim of this position statement was to inform the choice of physical activity tools for use within CF research and clinical settings.

Methods

A systematic review of physical activity tools to explore evidence for reliability, validity, and responsiveness. Narrative answers to “four key questions” on motion sensors, questionnaires and diaries were drafted by the core writing team and then discussed at the Exercise Working Group in ECFS Lisbon 2013.

Results and summary

Our current position is that activity monitors such as SenseWear or ActiGraph offer informed choices to facilitate a comprehensive assessment of physical activity, and should as a minimum report on dimensions of physical activity including energy expenditure, step count and time spent in different intensities and sedentary time. The DigiWalker pedometer offers an informed choice of a comparatively inexpensive method of obtaining some measurement of physical activity. The HAES represents an informed choice of questionnaire to assess physical activity. There is insufficient data to recommend the use of one diary over another. Future research should focus on providing additional evidence of clinimetric properties of these and new physical activity assessment tools, as well as further exploring the added value of physical activity assessment in CF.

Effectiveness and cost-effectiveness of a physical activity loyalty scheme for behaviour change maintenance: a cluster randomised controlled trial

Background
Increasing physical activity in the workplace can provide employee physical and mental health benefits, and employer economic benefits through reduced absenteeism and increased productivity. The workplace is an opportune setting to encourage habitual activity. However, there is limited evidence on effective behaviour change interventions that lead to maintained physical activity. This study aims to address this gap and help build the necessary evidence base for effective, and cost-effective, workplace interventions

Methods/design
This cluster randomised control trial will recruit 776 office-based employees from public sector organisations in Belfast and Lisburn city centres, Northern Ireland. Participants will be randomly allocated by cluster to either the Intervention Group or Control Group (waiting list control). The 6-month intervention consists of rewards (retail vouchers, based on similar principles to high street loyalty cards), feedback and other evidence-based behaviour change techniques. Sensors situated in the vicinity of participating workplaces will promote and monitor minutes of physical activity undertaken by participants. Both groups will complete all outcome measures. The primary outcome is steps per day recorded using a pedometer (Yamax Digiwalker CW-701) for 7 consecutive days at baseline, 6, 12 and 18 months. Secondary outcomes include health, mental wellbeing, quality of life, work absenteeism and presenteeism, and use of healthcare resources. Process measures will assess intervention “dose”, website usage, and intervention fidelity. An economic evaluation will be conducted from the National Health Service, employer and retailer perspective using both a cost-utility and cost-effectiveness framework. The inclusion of a discrete choice experiment will further generate values for a cost-benefit analysis. Participant focus groups will explore who the intervention worked for and why, and interviews with retailers will elucidate their views on the sustainability of a public health focused loyalty card scheme.

Discussion
The study is designed to maximise the potential for roll-out in similar settings, by engaging the public sector and business community in designing and delivering the intervention. We have developed a sustainable business model using a ‘points’ based loyalty platform, whereby local businesses ‘sponsor’ the incentive (retail vouchers) in return for increased footfall to their business.