Characterisation of Bioresorbable Composite Performance for Validation of New On-Line Process Monitoring Technology

There is an increasing interest in the biomedical field to create implantable medical devices to provide a temporary mechanical function for use inside the human body. In many of these applications bioresorbable polymer composites using PLLA with β-TCP , are increasingly being used due to their biocompatability, biodegradability and mechanical strength.1,3 These medical devices can be manufactured using conventional plastics processing methods such as injection moulding and extrusion, however there is great need to understand and control the process due to a lack of knowledge on the influence of processing on material properties. With the addition of biocompatible additives there is also a requirement to be able to predict the quality and level of dispersion within the polymer matrix. On-line UV-Vis spectroscopy has been shown to monitor the quality of fillers in polymers. This can eliminate time consuming and costly post-process evaluation of additive dispersion. The aim of this work was to identify process and performance relationships of PLLA/β-TCP composites with respect to melt-extrusion conditions. This is part of a wider study into on-line process monitoring of bioresorbable polymers as used in the medical industry.
These results show that final properties of the PLLA/ β-TCP composite are highly influenced by the particle size and loading. UV-Vis spectroscopy can be used on-line to monitor the final product and this can be utilised as a valuable tool for quality control in an application where consistent performance is of paramount importance.

Can traditional harvesting methods for cockles be accommodated in a Special Area of Conservation?

The European Natura 2000 project attempts to balance conservation and exploitation by permitting activities that do not affect the conservation status of designated sites. Given the scale of Natura 2000, guidelines are needed to facilitate the drafting of simple site management plans. This need is particularly acute for traditional harvesting methods for which there is usually strong local opposition to the imposition of controls. These issues were examined in Strangford Lough, a special area of conservation where cockles have traditionally been harvested by hand-raking. Raking was found not to affect the ability of cockles to rebury. There were significant reductions in Zostera biomass when raking was carried out within eelgrass beds (a 90% reduction in biomass available to winter migrant birds from summer raking). Traditional harvesting methods could therefore be accepted in Strangford as long as Zostera beds are avoided. A relatively low intensity of harvesting activity in Strangford Lough probably reflects low cockle densities (average 91.8 m(-2)), with the most economically valuable individuals at some distance from points of access to the shore. An economically feasible management plan could sanction traditional harvesting and result in the implementation of more resource-intensive management only if increases in cockle stocks and market prices stimulate large increases in harvesting activity.

Reduction of sample matrix effects - The analysis of benzimidazole residues in serum by immunobiosensor

Regulatory authorities, the food industry and the consumer demand reliable determination of chemical contaminants present in foods. A relatively new analytical technique that addresses this need is an immunobiosensor based on surface plasmon resonance (SPR) measurements. Although a range of tests have been developed to measure residues in milk, meat, animal bile and honey, a considerable problem has been encountered with both serum and plasma samples. The high degree of non-specific binding of some sample components can lead to loss of assay robustness, increased rates of false positives and general loss of assay sensitivity. In this paper we describe a straightforward precipitation technique to remove interfering substances from serum samples to be analysed for veterinary anthelmintics by SPR. This technique enabled development of an assay to detect a wide range of benzimidazole residues in serum samples by immunobiosensor. The limit of quantification was below 5 ng/ml and coefficients of variation were about 2%.

A Review of the Research on Offender Supervision in the Republic of Ireland and Northern Ireland

This paper reviews existing research on offender supervision in the Republic of Ireland and Northern Ireland. Three distinct areas are considered: practising offender supervision, experiencing supervision and decision-making in this sphere. The material presented draws on findings from a European-wide research action under the Cooperation in Science and Technology (COST) initiative. The review highlights some of the gaps in knowledge and the need to focus research attention in this area. This need is underlined by the expansion in probation’s role, both North and South. In common with other countries there has been a growth in referrals to probation and in the numbers of people subject to supervision, whether on a community sentence or under post-custodial licence conditions. This review highlights some of the relevant factors including the increased emphasis placed on public protection and attempts to reduce the prison population. The circulation of people through systems and the experiences, processes and decision-making involved are all areas that we argue are worthy of further research attention.

Halophilic microorganisms as a source of novel antibiofilm compounds

Objectives: There is great urgency for alternate sources of antibiotics to be identified. One relatively untapped source of novel bioproducts, including antimicrobials, is organisms derived from extreme environments. Halophiles (which require high salt concentrations) are one such group which is being increasingly explored for their biotechnological potential. The aim of this study was to identify halophilic environmental isolates which possessed in vitro and in vivo antimicrobial and antibiofilm activities. Methods: 73 halophilic bacteria and archaea were isolated from Kilroot salt mine in Northern Ireland. Culture extracts of each isolate were screened for antimicrobial and antibiofilm activity against numerous pathogenic bacteria, including Staphylococcus species and Pseudomonas aeruginosa, both model strains and clinical isolates. The methods used included disc diffusion assays of crude extracts, MIC screening, the MBEC assay, and an in vivo model based on the Greater Wax Moth (Galleria mellonella). Results: The assays indicated >50% of extracts displayed antimicrobial and antibiofilm activity against at least one pathogen, the majority being Staphylococcus species, but also E. coli and P. aeruginosa. Biofilms were either reduced or eradicated by halophile extracts when tested with the MBEC device. Further experiments demonstrated that these effects could be replicated in vivo, with extracts reducing the severity of infections and enhancing the survival of infected G. mellonella. Conclusions: The importance of extremophiles to pharmaceutical research should not be underestimated. While not yet fully characterised, based on the data obtained, the halophiles isolated during this study may provide a promising reservoir of novel antimicrobial and antibiofilm compounds.

Dense subgraphs on dynamic networks

In distributed networks, it is often useful for the nodes to be aware of dense subgraphs, e.g., such a dense subgraph could reveal dense substructures in otherwise sparse graphs (e.g. the World Wide Web or social networks); these might reveal community clusters or dense regions for possibly maintaining good communication infrastructure. In this work, we address the problem of self-awareness of nodes in a dynamic network with regards to graph density, i.e., we give distributed algorithms for maintaining dense subgraphs that the member nodes are aware of. The only knowledge that the nodes need is that of the dynamic diameter D, i.e., the maximum number of rounds it takes for a message to traverse the dynamic network. For our work, we consider a model where the number of nodes are fixed, but a powerful adversary can add or remove a limited number of edges from the network at each time step. The communication is by broadcast only and follows the CONGEST model. Our algorithms are continuously executed on the network, and at any time (after some initialization) each node will be aware if it is part (or not) of a particular dense subgraph. We give algorithms that (2 + e)-approximate the densest subgraph and (3 + e)-approximate the at-least-k-densest subgraph (for a given parameter k). Our algorithms work for a wide range of parameter values and run in O(D log n) time. Further, a special case of our results also gives the first fully decentralized approximation algorithms for densest and at-least-k-densest subgraph problems for static distributed graphs. © 2012 Springer-Verlag.

Brief announcement: Maintaining large dense subgraphs on dynamic networks

In distributed networks, some groups of nodes may have more inter-connections, perhaps due to their larger bandwidth availability or communication requirements. In many scenarios, it may be useful for the nodes to know if they form part of a dense subgraph, e.g., such a dense subgraph could form a high bandwidth backbone for the network. In this work, we address the problem of self-awareness of nodes in a dynamic network with regards to graph density, i.e., we give distributed algorithms for maintaining dense subgraphs (subgraphs that the member nodes are aware of). The only knowledge that the nodes need is that of the dynamic diameter D, i.e., the maximum number of rounds it takes for a message to traverse the dynamic network. For our work, we consider a model where the number of nodes are fixed, but a powerful adversary can add or remove a limited number of edges from the network at each time step. The communication is by broadcast only and follows the CONGEST model in the sense that only messages of O(log n) size are permitted, where n is the number of nodes in the network. Our algorithms are continuously executed on the network, and at any time (after some initialization) each node will be aware if it is part (or not) of a particular dense subgraph. We give algorithms that approximate both the densest subgraph, i.e., the subgraph of the highest density in the network, and the at-least-k-densest subgraph (for a given parameter k), i.e., the densest subgraph of size at least k. We give a (2 + e)-approximation algorithm for the densest subgraph problem. The at-least-k-densest subgraph is known to be NP-hard for the general case in the centralized setting and the best known algorithm gives a 2-approximation. We present an algorithm that maintains a (3+e)-approximation in our distributed, dynamic setting. Our algorithms run in O(Dlog n) time. © 2012 Authors.

Spatial statistics to estimate peat thickness using airborne radiometric data

Soil carbon stores are a major component of the annual returns required by EU governments to the Intergovernmental Panel on Climate Change. Peat has a high proportion of soil carbon due to the relatively high carbon density of peat and organic-rich soils. For this reason it has become increasingly important to measure and model soil carbon stores and changes in peat stocks to facilitate the management of carbon changes over time. The approach investigated in this research evaluates the use of airborne geophysical (radiometric) data to estimate peat thickness using the attenuation of bedrock geology radioactivity by superficial peat cover. Remotely sensed radiometric data are validated with ground peat depth measurements combined with non-invasive geophysical surveys. Two field-based case studies exemplify and validate the results. Variography and kriging are used to predict peat thickness from point measurements of peat depth and airborne radiometric data and provide an estimate of uncertainty in the predictions. Cokriging, by assessing the degree of spatial correlation between recent remote sensed geophysical monitoring and previous peat depth models, is used to examine changes in peat stocks over time. The significance of the coregionalisation is that the spatial cross correlation between the remote and ground based data can be used to update the model of peat depth. The result is that by integrating remotely sensed data with ground geophysics, the need is reduced for extensive ground-based monitoring and invasive peat depth measurements. The overall goal is to provide robust estimates of peat thickness to improve estimates of carbon stocks. The implications from the research have a broader significance that promotes a reduction in the need for damaging onsite peat thickness measurement and an increase in the use of remote sensed data for carbon stock estimations.

Models of Mortality - Analysing the Residuals

The area of mortality modelling has received significant attention over the last 20 years owing to the need to quantify and forecast improving mortality rates. This need is driven primarily by the concern of governments, professionals, insurance and actuarial professionals and individuals to be able to fund their old age. In particular, to quantify the costs of increasing longevity we need suitable model of mortality rates that capture the dynamics of the data and forecast them with sufficient accuracy to make them useful. In this paper we test several of those models by considering the fitting quality and in particular, testing the residuals of those models for normality properties. In a wide ranging study considering 30 countries we find that almost exclusively the residuals do not demonstrate normality. Further, in Hurst tests of the residuals we find evidence that structure remains that is not captured by the models.

Will your article be found? Authors choose a confusing variety of words to describe dental survival analyses

OBJECTIVES: Identify the words and phrases that authors used to describe time-to-event outcomes of dental treatments in patients.

MATERIALS AND METHODS: A systematic handsearch of 50 dental journals with the highest Citation Index for 2008 identified articles reporting dental treatment with time-to-event statistics (included "case" articles, n = 95), without time-to-event statistics (active "control" articles, n = 91), and all other articles (passive "control" articles n = 6796). The included and active controls were read, identifying 43 English words across the title, aim and abstract, indicating that outcomes were studied over time. Once identified, these words were sought within the 6796 passive controls. Words were divided into six groups. Differences in use of words were analyzed with Pearson's chi-square across these six groups, and the three locations (title, aim, and abstract).

RESULTS: In the abstracts, included articles used group 1 (statistical technique) and group 2 (statistical terms) more frequently than the active and passive controls (group 1: 35%, 2%, 0.37%, P < 0.001 and group 2: 31%, 1%, 0.06%, P < 0.001). The included and active controls used group 3 (quasi-statistical) equally, but significantly more often than the passive controls (82%, 78%, 3.21%, P < 0.001). In the aims, use of target words was similar for included and active controls, but less frequent for groups 1-4 in the passive controls (P < 0.001). In the title, group 2 (statistical techniques) and groups 3-5 (outcomes) were similar for included and active controls, but groups 2 and 3 were less frequent in the passive controls (P < 0.001). Significantly more included articles used group 6 words (stating the study duration) (54%, 30%, P = 0.001).

CONCLUSION: All included articles used time-to-event analyses, but two-thirds did not include words to highlight this in the abstract. There is great variation in the words authors used to describe dental time-to-event outcomes. Electronic identification of such articles would be inconsistent, with low sensitivity and specificity. Authors should improve the reporting quality. Journals should allow sufficient space in abstracts to summarize research, and not impose unrealistic word limits. Readers should be mindful of these problems when searching for relevant articles. Additional research is required in this field.

The Monetary Value Of Meat Authenticity And Food Safety In Ready To Heat Lasagne: Implications Of The ‘Horse Meat Scandal’ Across Europe

The recent ‘horse meat scandal’ in Europe has sparked huge concerns among consumers, as horse meat was found in beef lasagne ready to be consumed. Within STARTEC, a European funded project, this study investigates consumers’ preferences, attitudes and willingness to pay (WTP) towards characteristics of ready to heat (RTH) fresh lasagne, including origin of the meat, tested for meat authenticity, safety of the lasagne, and nutritional value, using Discrete Choice Experiments in six countries - Republic of Ireland, France, Italy, Spain, Germany and Norway. Our representative sample of 4,598 European consumers makes this the largest cross country study of this kind. The questionnaire was administered online in January 2014. Results from models in WTP-space show that, on average, consumers are willing to pay considerable amount (about €4-9) for food authenticity; on this Irish and Italian are the least concerned while Spanish are the most concerned. As expected from discussing with stakeholders, food safety claims and nutritional value of the RTH lasagne are relatively less important. Consumers also value knowing the origin of ingredients preferring locally sourced meat. Primarily, the results of this study present strong evidence that consumers in Europe are highly concerned about authenticity of the meat in ready meals and strongly prefer to know that the meat is national. This evidence suggests that there is great value in providing information on these attributes, both from a consumer perspective and where this leads to an increased consumer confidence has benefits for the food industry.

Future of the transdermal drug delivery market – have we barely touched the surface?

Introduction: Transdermal drug delivery is themovement of drugs across the skin for absorption into the systemic circulation. Transfer of the drug can occur via passive or active means; passive trans- dermal products donot disrupt the stratumcorneumto facilitate deliverywhereas active technologies do. Due to the very specific physicochemical properties necessary for successful passive transdermal drug delivery, this sector of the pharmaceutical industry is relatively small. There are many well-documented benefits of this delivery route however, and as a result there is great interest in increasing the number of therapeutic substances that can be delivered transdermally. Areas Covered: This review discusses the various transdermal products that are currently/have been marketed, and the paths that led to their success, or lack of. Both passive and active transdermal technologies are considered with the advantages and limitations of each high- lighted. In addition to marketed products, technologies that are in the investigative stages by various pharmaceutical companies are reviewed. Expert Opinion: Passive transdermal drug delivery has made limited progress in recent years, however with the ongoing intense research into active technologies, there is great potential for growth within the transdermal delivery market. A number of active technologies have already been translated into marketed products, with other platforms including microneedles, rapidly progressing towards commercialisation.