Bis(trifluoromethyl)mercury(II) complexes with purine and 3,5-dimethyl-4 '-amino-triazole as ligands, [Hg(CF3)(2)(Pur)](4) and [Hg(CF3)(2)(Dat)](2)

Colourless single crystals of [Hg(CF3)(2)(Pur)](4) and [Hg(CF3)(2)(Dat)](2) were obtained from aqueous and etheric solutions of the respective components Purine, (imidazo[4,5-d]pyrimidine, Pur), 3,5-dimethyl-4 '-amino-triazole (Dat) and bis(trifluoromethyl)mercury(II), Hg(CF3)(2). [Hg(CF3)(2)(Pur)](4) crystallizes with the tetragonal system (P-4, Z = 8, a = 1486.8(2), c = 1026.2(l) pm, R-all = 0.0657) with tetrameric molecules consisting of four purine molecules bridged by slightly bent Hg(CF3)2 molecules forming a cage with the CF3 ligands surrounding this cage. The two modifications of [Hg(Dat)(CF3)2]2 (1: 170 K, triclinic, P-1, Z = 2, a 814.9(2), b = 845.4(2), c = 968.4(3) pm, alpha = 106.55(2)degrees, beta= 103.41(2)degrees, gamma = 110.79(2)degrees, R-all = 0.1189; II: monoclinic, P2(1)/c, Z = 8, a = 879.8(2), b = 1731.0(3), c = 1593.9(3) pm, beta = 106.89(2)degrees, R-all = 0.1199) both contain dimeric molecules that are stacked parallel to one crystal axis to strands which are arranged in a parallel fashion in I and rotated against each other in 11 by 110 degrees. In both, the tetrameric [Hg(CF3)(2)(Pur)](4) and the dimeric [Hg(CF3)(2)(Dat)](2) the Hg(CF3)(2) molecules are slightly bent (around 167 and 170 degrees) and rather weakly attached to the N-donor ligands Pur and Dat with Hg-N distances around 272 pm, although in both cases the Hg atoms bridge between two ligand molecules.

Ammonium mercury(II) dichloride nitrate, (NH4)(2)HgCl2(NO3)(2)

The title compound, (NH4)(2)HgCl2 (NO3)(2), is a double salt of HgCl2 and NH4NO3 and can also be written as `HgCl2.2NH(4)NO(3)'. The structure contains HgCl2 units which are connected by nitrate groups, through long links of ca. 2.90 Angstrom, to give chains running along [010]. All atoms apart from the two oxygen atoms are located on a mirror plane perpendicular to the b axis. The coordination around mercury is a distorted hexagonal bipyramid.

Poly[mercury(II)-di-mu-chloro-mu-pyrazine-kappa N-2 : N ']

In [HgCl2(Pyp)](n) (Pyp = pyrazine, C4H4N2), chloride-bridged HgCl4/2 strands are connected into layers by pyrazine molecules. The Hg atom is on a site of symmetry 2/m, the unique Cl atom is on a mirror plane, the unique N atom is on a twofold rotation axis, and the unique C and H atoms are in general positions.

catena-poly[mercury(II)-di-mu-chloro-mu-pyridazine-kappa N-2 : N ']

The crystal structure of [HgCl2(Pyo)](n) (Pyo = pyridazine, C4H4N2) consists of chloride-bridged strands of octahedrally coordinated mercuric centers, connected by the two neighboring N atoms of pyridazine molecules. All atoms lie in special positions:Hg with site symmetry 2/m and the others on mirror planes.

catena-poly[mercury(II)-di-mu-bromo-mu-pyridazine-kappa N-2 : N ']

The crystal structure of [HgBr2(Pyo)](n) (Pyo = pyridazine, C4H4N2) consists of strands of octahedrally coordinated mercuric centers asymmetrically bridged by bromide and connected by the two neighboring N atoms of pyridazine molecules to complete the octahedral coordination of mercury. The Hg atoms lie on inversion centers.

Trimethylphenylammonium trichloromercurate(II), (Me3PhN)[HgCl3]

The crystal structure of (Me3PhN)[HgCl3] contains [(CH3)(3)(C6H5)N](+) cations and chains of distorted vertex-sharing [HgCl4](2-) tetrahedra running parallel to [100]. The tetrahedra around mercury(II) are distorted, exhibiting a [2+2] coordination. Apart from one of the Cl atoms, which is located on a twofold rotation axis, and a pair of symmetry-related methyl C atoms, which are located in general positions, all non H-atoms lie on mirror planes.

Bis(tetraethylammonium) octabromo-trimercurate(II), (Et4N)(2)[Hg3Br8]

The structure of (Et4N)(2)[Hg3Br8] contains isolated dinuclear [Hg2Br6](2-) anions and neutral HgBr2 molecules. Charge balance is achieved by ordered [Et4N](+) cations. The formula may therefore be written as (Et4N)(2)[Hg2Br6][HgBr2]. The N atoms of the (Et4N)(+) ions lie on a (4) over bar axis along [001] and, whereas one of the mercury(II) ions is placed on a mirror plane perpendicular to the c axis, the second one is located on a special position of site symmetry 2/m.

Task-specific ionic liquid for solubilizing metal oxides

Protonated betaine bis(trifluoromethylsulfonyl) imide is an ionic liquid with the ability to dissolve large quantities of metal oxides. This metal-solubilizing power is selective. Soluble are oxides of the trivalent rare earths, uranium(VI) oxide, zinc(II) oxide, cadmium( II) oxide, mercury( II) oxide, nickel( II) oxide, copper(II) oxide, palladium(II) oxide, lead(II) oxide, manganese( II) oxide, and silver( I) oxide. Insoluble or very poorly soluble are iron(III), manganese(IV), and cobalt oxides, as well as aluminum oxide and silicon dioxide. The metals can be stripped from the ionic liquid by treatment of the ionic liquid with an acidic aqueous solution. After transfer of the metal ions to the aqueous phase, the ionic liquid can be recycled for reuse. Betainium bis( trifluoromethylsulfonyl) imide forms one phase with water at high temperatures, whereas phase separation occurs below 55.5 degrees C ( temperature switch behavior). The mixtures of the ionic liquid with water also show a pH-dependent phase behavior: two phases occur at low pH, whereas one phase is present under neutral or alkaline conditions. The structures, the energetics, and the charge distribution of the betaine cation and the bis( trifluoromethylsulfonyl) imide anion, as well as the cation-anion pairs, were studied by density functional theory calculations.

Mercury capture on a supported chlorocuprate(II) ionic liquid adsorbent studied using operando synchrotron X-ray absorption spectroscopy

Mercury scrubbing from gas streams using a supported 1-butyl-3-methylimidazolium chlorocuprate(II) ionic liquid ([C4mim]2[Cu2Cl6]) has been studied using operando EXAFS. Initial oxidative capture as [HgCl3]– anions was confirmed, this was then followed by the unanticipated generation of mercury(I) chloride through comproportionation with additional mercury from the gas stream. Combining these two mechanisms leads to net one electron oxidative extraction of mercury from the gas with increased potential capacity and efficiency for supported ionic liquid mercury scrubbers.

The ammonium bromomercurates(II) (NH4)Hg5Br11 and (NH4)(4)HgBr6

The crystal structures of two ammonium bromomercurates(II), (NH4)Hg5Br11 (1) and (NH4)(4)HgBr6 (2), were determined from single-crystal X-ray diffraction data: 1: monoclinic, C2/m (no. 12), a = 1231.3(3), b = 1517.4(3), c = 680.4(2) pm, beta = 118.78(2)degrees, Z = 2, R-1 = 0.0391 for I-0 > 2 sigma(I-0); 2: tetragonal, P4/mnc (no. 128), a = 925.6(1), c = 887.2(1) pm, Z = 2, R-1 = 0.0370 for I(0 >)2a(I-0). According to (NH4)Br[HgBr2](5) and (NH4)(4)Br-4[HgBr2] they both contain [Br-Hg-Br] molecules. Additional bromide ions are only loosely attached to the mercury atoms, however involved in (NH4)(+)-Br- bonding.

Affinity of divalent mercury towards nitrogen donor ligands

As with gold, relativistic effects are important in the chemistry of mercury Together with the closed-shell d(10) configuration of Hg2+ they account for the special bonding schemes as preferred linear coordination with highly covalent contributions to chemical bonding or special affinities to nitrogen and sulfur that are so prominent in mercuric chemistry This research report summarizes recent research on coordination compounds with halogen, oxygen and, especially, nitrogen as direct bonding partners of di-valent mercury and their competition with each other. In a rather systematic way N-donor ligands with one, two and more than two nitrogen atoms have been inspected in order to elucidate the influences that lead to the special bonding schemes of Hg-II-N compounds.

An ionic liquid process for mercury removal from natural gas

Efficient scrubbing of mercury vapour from natural gas streams has been demonstrated both in the laboratory and on an industrial scale, using chlorocuprate(ii) ionic liquids impregnated on high surface area porous solid supports, resulting in the effective removal of mercury vapour from natural gas streams. This material has been commercialised for use within the petroleum gas production industry, and has currently been running continuously for three years on a natural gas plant in Malaysia. Here we report on the chemistry underlying this process, and demonstrate the transfer of this technology from gram to ton scale.

Formation of soluble mercury oxide coatings: transformation of elemental mercury in soils

The impact of mercury (Hg) on human and ecological health has been known for decades. Although a treaty signed in 2013 by 147 nations regulates future large-scale mercury emissions, legacy Hg contamination exists worldwide and small scale releases will continue. The fate of elemental mercury, Hg(0), lost to the subsurface and its potential chemical transformation that can lead to changes in speciation and mobility are poorly understood. Here we show that Hg(0) beads interact with soil or manganese oxide solids and x-ray spectroscopic analysis indicates that the soluble mercury coatings are HgO. Dissolution studies show that after reacting with a composite soil, > 20 times more Hg is released into water from the coated beads than from a pure liquid mercury bead. An even larger, > 700 times, release occurs from coated Hg(0) beads that have been reacted with manganese oxide, suggesting that manganese oxides are involved in the transformation of the Hg(0) beads and creation of the soluble mercury coatings. Although the coatings may inhibit Hg(0) evaporation, the high solubility of the coatings can enhance Hg(II) migration away from the Hg(0)-spill site and result in potential changes in mercury speciation in the soil and increased mercury mobility.