Application of Internet techniques into online collaborative design and manufacture

A research project in Web-enabled collaborative design and manufacture has been conducted. The major tasks of the project include the development of a Web-enabled environment for collaboration, online collaborative CAD/CAM, remote execution of large size programs (RELSP), and distributed product design. The tasks and Web/Internet techniques involved are presented first, followed by detail description of two approaches developed for implementation of the research: (1) a client-server approach for RELSP, where the following Internet techniques are utilized: CORBA, Microsoft’s Internet information server, Tomcat server, JDBC and ODBC; (2) Web-Services supported collaborative CAD which enables geographically dispersed designers jointly conduct a design task in the way of speaking and seeing each other and instantaneously modifying the CAD drawing online.

Shame, intimacy and self-definition: An assessment of the emotional foundation and intimate relationship consequences of an introjective personality orientation.

The current study sought to elaborate and test a theoretical proposition that introjective personality functioning, which has been implicated in various psychological difficulties (e.g., self-critical depression, obsessive-compulsive disorder), has an emotional foundation in the self-conscious emotion of shame and is supported by dissociation. Moreover, introjective functioning was predicted to be associated with reduced interpersonal intimacy. To test the model, a Web-based survey design using path analysis was used. Three hundred and fifteen university students were assessed with measures of self-conscious emotions (i.e., shame, guilt, and embarrassment), introjective (self-definition) and anaclitic (relational) personality style, pathological dissociation, and interpersonal intimacy. Introjective personality was found to be associated with increased shame and reduced interpersonal intimacy. However, the path between pathological dissociation and introjective functioning was not significant. The results are discussed with reference to the moderating influence of introjective functioning between shame and reduced interpersonal intimacy.

Design of composite asymmetric cellular beams and beams with large web openings

The design of composite asymmetric cellular beams is not fully covered by existing guidance but is an area of important practical application. Asymmetry in the shape of the cross-section of cellular beams causes development of additional bending moments in the web-posts between closely placed openings. Furthermore, the development of local composite action influences the distribution of forces in the web-flange Tees. The design method presented in this paper takes account of high degrees of asymmetry in the cross-section and also the influence of elongated or rectangular openings.

Cold-formed steel sections with web openings subjected to web crippling under two-flange loading conditions - Part II: Parametric study and proposed design equations

A parametric study of cold-formed steel sections with web openings subjected to web crippling was undertaken using finite element analysis, to investigate the effects of web holes and cross-section sizes on the web crippling strengths of channel sections subjected to web crippling under both interior-two-flange (ITF) and end-two-flange (ETF) loading conditions. In both loading conditions, the hole was centred beneath the bearing plate. It was demonstrated that the main factors influencing the web crippling strength are the ratio of the hole depth to the flat depth of the web, and the ratio of the length of bearing plates to the flat depth of the web. In this paper, design recommendations in the form of web crippling strength reduction factors are proposed, that are conservative to both the experimental and finite element results.

Effect of web holes on web crippling strength of cold-formed steel channel sections under end-one-flange loading condition - Part II: Parametric study and proposed design equations

A parametric study of cold-formed steel sections with web openings subjected to web crippling under end-one-flange (EOF) loading condition is undertaken, using finite element analysis, to investigate the effects of web holes and cross-section sizes. The holes are located either centred above the bearing plates or with a horizontal clear distance to the near edge of the bearing plates. It was demonstrated that the main factors influencing the web crippling strength are the ratio of the hole depth to the depth of the web, the ratio of the length of bearing plates to the flat depth of the web and the location of the holes as defined by the distance of the hole from the edge of the bearing plate divided by the flat depth of web. In this study, design recommendations in the form of web crippling strength reduction factor equations are proposed, which are conservative when compared with the experimental and finite element results.

A Novel Multimodal Interface for Improving Visually Impaired People's Web Accessibility

This paper introduces a novel interface designed to help blind and visually impaired people to explore and navigate on the Web. In contrast to traditionally used assistive tools, such as screen readers and magnifiers, the new interface employs a combination of both audio and haptic features to provide spatial and navigational information to users. The haptic features are presented via a low-cost force feedback mouse allowing blind people to interact with the Web, in a similar fashion to their sighted counterparts. The audio provides navigational and textual information through the use of non-speech sounds and synthesised speech. Interacting with the multimodal interface offers a novel experience to target users, especially to those with total blindness. A series of experiments have been conducted to ascertain the usability of the interface and compare its performance to that of a traditional screen reader. Results have shown the advantages that the new multimodal interface offers blind and visually impaired people. This includes the enhanced perception of the spatial layout of Web pages, and navigation towards elements on a page. Certain issues regarding the design of the haptic and audio features raised in the evaluation are discussed and presented in terms of recommendations for future work.

Web crippling behaviour of cold-formed steel channel sections with offset web holes subjected to interior-two-flange loading

Cold-formed steel sections are often used as wall studs or floor joists; such sections often include web holes for ease of installation of the services. Cold-formed steel design codes, however, do not consider the effect of such web holes. In this paper, a combination of experimental tests and non-linear elasto-plastic finite element analyses are used to investigate the effect of such holes on web crippling under interior-two-flange (ITF) loading conditions; the cases of both flange fastened and flange unfastened are considered. A good agreement between the experimental tests and finite element analyses was obtained. The finite element model was then used for the purposes of a parametric study on the effect of different sizes and position of holes in the web. It was demonstrated that the main factors influencing the web crippling strength are the ratio of the hole depth to the depth of the web, and the ratio of the distance from the edge of the bearing to the flat depth of web. Design recommendations in the form of web crippling strength reduction factors are proposed, that are conservative to both the experimental and finite element results.

Investigating the use of compliant webs in the damage-tolerant design of stiffener run-outs

In this work, the use of a compliant web design for improved damage tolerance in stiffener run-outs is investigated. Firstly, a numerical study that incorporates the possibility of debonding and delamination (using VCCT) is used to select a favourable compliant run-out configuration. Then, three different configurations are compared to establish the merits of the compliant design: a baseline configuration, a configuration with optimised tapering and the selected compliant configuration. The performance of these configurations, in terms of strength and damage tolerance, was compared numerically using a parametric finite element analysis. The energy release rates for debonding and delamination, for different crack lengths across the specimen width, were used for this comparison. The three configurations were subsequently manufactured and tested. In order to monitor the failure process, acoustic emission (AE) equipment was used and proved valuable in the detection and analysis of failure. The predicted failure loads, based on the energy release rates, showed good agreement with the experiments, particularly when the distribution of energy release rate across the width of the specimen was taken into account. As predicted numerically, the compliant configuration failed by debonding and showed improved damage tolerance compared to the baseline and tapered stiffener run-outs.

Effect of offset web holes on web crippling strength of cold-formed steel channel sections under end-two-flange loading condition

A combination of experiments and non-linear finite element analyses are used to investigate the effect of offset web holes on the web crippling strength of cold-formed steel channel sections under the end-two-flange (ETF) loading condition; the cases of both flanges fastened and unfastened to the support are considered. The web holes are located at the mid-depth of the sections, with a horizontal clear distance of the web holes to the near edge of the bearing plate. Finite element analysis results are compared against the laboratory test results; good agreement was obtained in terms of both strength and failure modes. A parametric study was then undertaken to investigate both the effect of the position of holes in the web and the cross-section sizes on the web crippling strength of the channel sections. It was demonstrated that the main factors influencing the web crippling strength are the ratio of the hole depth to the depth of the web, and the ratio of the distance from the edge of the bearing to the flat depth of the web. Design recommendations in the form of web crippling strength reduction factors are proposed in this study.

Pull-out forces in shear connectors in composite beams with large web openings

Composite beams with large web openings are often used, and their design is controlled by Vierendeel bending at the four corners of each opening, which is assisted by local composite action with the floor slab. Development of this Vierendeel bending resistance may be limited by pull-out failure of the shear connectors. In this paper, a non-linear elasto-plastic finite element model of a composite beam with web openings was used to investigate this mode of pull-out failure. A test was performed on a typical composite slab in which the shear connectors were subject to pure tension and the failure load was 67 kN, which is approximately 70% of the longitudinal shear resistance. The results of the finite element model are compared against those obtained using the established design theory, that does not limit the vertical pull-out resistance of the shear connectors. It is shown that the local bending resistance due to composite action should be reduced when limited by pull-out of the shear connectors. A parametric study investigated the effect of openings of 600 to 1200 mm length. A simple model is developed to establish the Vierendeel bending resistance, when limited by pull-out of the shear connectors.

Effect of a Web-Based Behavior Change Program on Weight Loss and Cardiovascular Risk Factors in Overweight and Obese Adults at High Risk of Developing Cardiovascular Disease:Randomized Controlled Trial

BACKGROUND: Web-based programs are a potential medium for supporting weight loss because of their accessibility and wide reach. Research is warranted to determine the shorter- and longer-term effects of these programs in relation to weight loss and other health outcomes.

OBJECTIVE: The aim was to evaluate the effects of a Web-based component of a weight loss service (Imperative Health) in an overweight/obese population at risk of cardiovascular disease (CVD) using a randomized controlled design and a true control group.

METHODS: A total of 65 overweight/obese adults at high risk of CVD were randomly allocated to 1 of 2 groups. Group 1 (n=32) was provided with the Web-based program, which supported positive dietary and physical activity changes and assisted in managing weight. Group 2 continued with their usual self-care (n=33). Assessments were conducted face-to-face. The primary outcome was between-group change in weight at 3 months. Secondary outcomes included between-group change in anthropometric measurements, blood pressure, lipid measurements, physical activity, and energy intake at 3, 6, and 12 months. Interviews were conducted to explore participants' views of the Web-based program.

RESULTS: Retention rates for the intervention and control groups at 3 months were 78% (25/32) vs 97% (32/33), at 6 months were 66% (21/32) vs 94% (31/33), and at 12 months were 53% (17/32) vs 88% (29/33). Intention-to-treat analysis, using baseline observation carried forward imputation method, revealed that the intervention group lost more weight relative to the control group at 3 months (mean -3.41, 95% CI -4.70 to -2.13 kg vs mean -0.52, 95% CI -1.55 to 0.52 kg, P<.001), at 6 months (mean -3.47, 95% CI -4.95 to -1.98 kg vs mean -0.81, 95% CI -2.23 to 0.61 kg, P=.02), but not at 12 months (mean -2.38, 95% CI -3.48 to -0.97 kg vs mean -1.80, 95% CI -3.15 to -0.44 kg, P=.77). More intervention group participants lost ≥5% of their baseline body weight at 3 months (34%, 11/32 vs 3%, 1/33, P<.001) and 6 months (41%, 13/32 vs 18%, 6/33, P=.047), but not at 12 months (22%, 7/32 vs 21%, 7/33, P=.95) versus control group. The intervention group showed improvements in total cholesterol, triglycerides, and adopted more positive dietary and physical activity behaviors for up to 3 months verus control; however, these improvements were not sustained.

CONCLUSIONS: Although the intervention group had high attrition levels, this study provides evidence that this Web-based program can be used to initiate clinically relevant weight loss and lower CVD risk up to 3-6 months based on the proportion of intervention group participants losing ≥5% of their body weight versus control group. It also highlights a need for augmenting Web-based programs with further interventions, such as in-person support to enhance engagement and maintain these changes.