A method to reconstruct patient-specific proximal femur surface models from planar pre-operative radiographs

Three-dimensional reconstruction from volumetric medical images (e.g. CT, MRI) is a well-established technology used in patient-specific modelling. However, there are many cases where only 2D (planar) images may be available, e.g. if radiation dose must be limited or if retrospective data is being used from periods when 3D data was not available. This study aims to address such cases by proposing an automated method to create 3D surface models from planar radiographs. The method consists of (i) contour extraction from the radiograph using an Active Contour (Snake) algorithm, (ii) selection of a closest matching 3D model from a library of generic models, and (iii) warping the selected generic model to improve correlation with the extracted contour.

This method proved to be fully automated, rapid and robust on a given set of radiographs. Measured mean surface distance error values were low when comparing models reconstructed from matching pairs of CT scans and planar X-rays (2.57–3.74 mm) and within ranges of similar studies. Benefits of the method are that it requires a single radiographic image to perform the surface reconstruction task and it is fully automated. Mechanical simulations of loaded bone with different levels of reconstruction accuracy showed that an error in predicted strain fields grows proportionally to the error level in geometric precision. In conclusion, models generated by the proposed technique are deemed acceptable to perform realistic patient-specific simulations when 3D data sources are unavailable.

Judging Time Intevals using a model of perceptuo-motor control

Estimating a time interval and temporally coordinating movements in space are fundamental skills, but the relationships between these different forms of timing, and the neural processes that they incur, are not well understood. While different theories have been proposed to account for time perception, time estimation, and the temporal patterns of coordination, there are no general mechanisms which unify these various timing skills. This study considers whether a model of perceptuo-motor timing, the tau(GUIDE), can also describe how certain judgements of elapsed time are made. To evaluate this, an equation for determining interval estimates was derived from the tau(GUIDE) model and tested in a task where participants had to throw a ball and estimate when it would hit the floor. The results showed that in accordance with the model, very accurate judgements could be made without vision (mean timing error -19.24 msec), and the model was a good predictor of skilled participants' estimate timing. It was concluded that since the tau(GUIDE) principle provides temporal information in a generic form, it could be a unitary process that links different forms of timing.

A simple model of atomic interactions in noble metals based explicitly on electronic structure

A total energy tight-binding model with a basis of just one s state per atom is introduced. It is argued that this simplest of all tight-binding models provides a surprisingly good description of the structural stability and elastic constants of noble metals. By assuming inverse power scaling laws for the hopping integrals and the repulsive pair potential, it is shown that the density matrix in a perfect primitive crystal is independent of volume, and structural energy differences and equations of state are then derived analytically. The model is most likely to be of use when one wishes to consider explicitly and self-consistently the electronic and atomic structures of a generic metallic system, with the minium of computation expense. The relationship to the free-electron jellium model is described. The applicability of the model to other metals is also considered briefly.

A generic tool for cost estimating in aircraft design

A methodology to estimate the cost implications of design decisions by integrating cost as a design parameter at an early design stage is presented. The model is developed on a hierarchical basis, the manufacturing cost of aircraft fuselage panels being analysed in this paper. The manufacturing cost modelling is original and relies on a genetic-causal method where the drivers of each element of cost are identified relative to the process capability. The cost model is then extended to life cycle costing by computing the Direct Operating Cost as a function of acquisition cost and fuel burn, and coupled with a semi-empirical numerical analysis using Engineering Sciences Data Unit reference data to model the structural integrity of the fuselage shell with regard to material failure and various modes of buckling. The main finding of the paper is that the traditional minimum weight condition is a dated and sub-optimal approach to airframe structural design.

Animal foraging from an individual perspective: an object orientated model

A model system, HOOFS (Hierarchical Object Orientated Foraging Simulator), has been developed to study foraging by animals in a complex environment. The model is implemented using an individual-based object-orientated structure. Different species of animals inherit their general properties from a generic animal object which inherits from the basic dynamic object class. Each dynamic object is a separate program thread under the control of a central scheduler. The environment is described as a map of small hexagonal patches, each with their own level of resources and a patch-specific rate of resource replenishment. Each group of seven patches (0th order) is grouped into a Ist order super-patch with seven nth order super-patches making up a n + 1th order super-patch for n up to a specified value. At any time each animal is associated with a single patch. Patch choice is made by combining the information on the resources available within different order patches and super-patches along with information on the spatial location of other animals. The degree of sociality of an animal is defined in terms of optimal spacing from other animals and by the weighting of patch choice based on social factors relative to that based on food availability. Information, available to each animal, about patch resources diminishes with distance from that patch. The model has been used to demonstrate that social interactions can constrain patch choice and result in a short-term reduction of intake and a greater degree of variability in the level of resources in patches. We used the model to show that the effect of this variability on the animal's intake depends on the pattern of patch replenishment. (C) 1998 Elsevier Science B.V. All rights reserved.</p>

Novel Generic Bounds on the Sum Rate of MIMO ZF Receivers

This paper introduces some novel upper and lower bounds on the achievable sum rate of multiple-input multiple-output (MIMO) systems with zero-forcing (ZF) receivers. The presented bounds are not only tractable but also generic since they apply for different fading models of interest, such as uncorrelated/ correlated Rayleigh fading and Ricean fading. We further formulate a new relationship between the sum rate and the first negative moment of the unordered eigenvalue of the instantaneous correlation matrix. The derived expressions are explicitly compared with some existing results on MIMO systems operating with optimal and minimum mean-squared error (MMSE) receivers. Based on our analytical results, we gain valuable insights into the implications of the model parameters, such as the number of antennas, spatial correlation and Ricean-K factor, on the sum rate of MIMO ZF receivers. © 2011 IEEE.

Generic Ergodic Capacity Bounds for Fixed-Gain AF Dual-Hop Relaying Systems

This paper elaborates on the ergodic capacity of fixed-gain amplify-and-forward (AF) dual-hop systems, which have recently attracted considerable research and industry interest. In particular, two novel capacity bounds that allow for fast and efficient computation and apply for nonidentically distributed hops are derived. More importantly, they are generic since they apply to a wide range of popular fading channel models. Specifically, the proposed upper bound applies to Nakagami-m, Weibull, and generalized-K fading channels, whereas the proposed lower bound is more general and applies to Rician fading channels. Moreover, it is explicitly demonstrated that the proposed lower and upper bounds become asymptotically exact in the high signal-to-noise ratio (SNR) regime. Based on our analytical expressions and numerical results, we gain valuable insights into the impact of model parameters on the capacity of fixed-gain AF dual-hop relaying systems. © 2011 IEEE.

Linking response strategies adopted by construction firms during the 2007 economic recession to Porter’s generic strategies

The time period bridging the years 2007 to 2012 will be remembered as one characterised by dramatic changes in the Irish and UK construction industries. Construction companies witnessed unprecedented changes in the environment, namely the coincidence of a sharp economic downturn, the significant decline of public works, a reduction in lending, increased competition, and structural changes in the marketplace. Nevertheless, little has been documented on what response strategies construction companies adopt as a result of an economic recession. Based on four exploratory case studies, a taxonomy framework of the response strategies adopted by Irish and UK construction companies during the 2007 economic recession was developed relative to Porter’s (1980) generic strategies of cost leadership, differentiation, and focus. Porter’s model (1980) is a well known theoretical framework among business strategists and industrial economists worldwide. The analysis provides strong support for the adoption of cost leadership strategies as a means to surviving the 2007 economic recession. The case studies further suggest that cost control initiatives are one of the most important attributes in companies’ responses to the 2007 recession. The findings provide valuable assistance for construction contractors in developing effective strategies and thus reducing business failures during recessionary periods.