Early-type stars observed in the ESO UVES Paranal Observatory Project - I. Interstellar NaIUV, TiII and CaIIKobservations

We present an analysis of interstellar NaI (lambda(air) = 3302.37 and 3302.98 angstrom), TiII (lambda(air) = 3383.76 angstrom) and CaII K (lambda(air) = 3933.66 angstrom) absorption features for 74 sightlines towards O- and B-type stars in the Galactic disc. The data were obtained from the Ultraviolet and Visual Echelle Spectrograph Paranal Observatory Project, at a spectral resolution of 3.75 km s(-1) and with mean signal-to-noise ratios per pixel of 260, 300 and 430 for the NaI, TiII and CaII observations, respectively. Interstellar features were detected in all but one of the TiII sightlines and all of the CaII sightlines. The dependence of the column density of these three species with distance, height relative to the Galactic plane, HI column density, reddening and depletion relative to the solar abundance has been investigated. We also examine the accuracy of using the NaI column density as an indicator of that for HI. In general, we find similar strong correlations for both Ti and Ca, and weaker correlations for Na. Our results confirm the general belief that Ti and Ca occur in the same regions of the interstellar medium ( ISM) and also that the TiII/CaII ratio is constant over all parameters. We hence conclude that the absorption properties of Ti and Ca are essentially constant under the general ISM conditions of the Galactic disc.

General local and rectilinear vibrational coordinates consistent with Eckart's conditions

We present a general method to construct a set of local rectilinear vibrational coordinates for a nonlinear molecule whose reference structure does not necessarily correspond to a stationary point of the potential-energy surface. We show both analytically and with a numerical example that the vibrational coordinates satisfy Eckart's conditions. In addition, we find that the Watson Hamiltonian provides a fairly robust description even of highly excited vibrational states of triatomic molecules, except for a few states of large amplitude motion sampling the singular region of the Hamiltonian. These states can be identified through slow convergence.

Can diagnostic triage by general practitioners or rheumatology nurses improve the positive predictive value of referrals to early arthritis clinics?

Objectives: To determine whether diagnostic triage by general practitioners (GPs) or rheumatology nurses (RNs) can improve the positive predictive value of referrals to early arthritis clinics (EACs).

Methods: Four GPs and two RNs were trained in the assessment of early in?ammatory arthritis (IA) by four visits to an EAC supervised by hospital rheumatologists. Patients referred to one of three EACs were recruited for study and assessed independently by a GP, an RN and one of six rheumatologists. Each assessor was asked to record their clinical ?ndings and whether they considered the patient to have IA. Each was then asked to judge the appropriateness of the referral according to predetermined guidelines. The rheumatologists had been shown previously to have a satisfactory level of agreement in the assessment of IA.

Results: Ninety-six patients were approached and all consented to take part in the study. In 49 cases (51%), the rheumatologist judged that the patient had IA and that the referral was appropriate. The assessments of GPs and RNs were compared with those of the rheumatologists. Levels of agreement were measured using the kappa value, where 1.0 represents total unanimity. The kappa value was
0.77 for the GPs when compared with the rheumatologists and 0.79 for the RNs. Signi?cant stiffness in the morning or after rest and objective joint swelling were the most important clinical features enabling the GPs and RNs to discriminate between IA and non-IA conditions.

Conclusion: Diagnostic triage by GPs or RNs improved the positive predictive value of referrals to an EAC with a degree of accuracy approaching that of a group of experienced rheumatologists.

Complete conditions for entanglement transfer

We investigate the conditions to entangle two qubits interacting with local environments driven by a continuous-variable correlated field. We find the conditions to transfer the entanglement from the driving field to the qubits both in dynamical and steady-state cases. We see how the quantum correlations initially present in the driving field play a critical role in the entanglement-transfer process. The system we treat is general enough to be adapted to different physical setups.

Multi-zone TAP-reactors theory and application - IV. Ideal and non-ideal boundary conditions

We study the influence of non-ideal boundary and initial conditions (BIC) of a temporal analysis of products (TAP) reactor model on the data (observed exit flux) analysis. The general theory of multi-response state-defining experiments for a multi-zone TAP reactor is extended and applied to model several alternative boundary and initial conditions proposed in the literature. The method used is based on the Laplace transform and the transfer matrix formalism for multi-response experiments. Two non-idealities are studied: (1) the inlet pulse not being narrow enough (gas pulse not entering the reactor in Dirac delta function shape) and (2) the outlet non-ideality due to imperfect vacuum. The effect of these non-idealities is analyzed to the first and second order of approximation. The corresponding corrections were obtained and discussed in detail. It was found that they are negligible. Therefore, the model with ideal boundary conditions is proven to be completely adequate to the description and interpretation of transport-reaction data obtained with TAP-2 reactors.

Extraction of electrode kinetic parameters from microdisc voltammetric data measured under transport conditions intermediate between steady-state convergent and transient linear diffusion as typically applies to room temperature ionic liquids

The extraction of electrode kinetic parameters for electrochemical couples in room-temperature ionic liquids (RTILs) is currently an area of considerable interest. Electrochemists typically measure electrode kinetics in the limits of either transient planar or steady-state convergent diffusion for which the voltammetic response is well understood. In this paper we develop a general method allowing the extraction of this kinetic data in the region where the diffusion is intermediate between the planar and convergent limits, such as is often encountered in RTILs using microelectrode voltammetry. A general working surface is derived, allowing the inference of Butler-Volmer standard electrochemical rate constants for the peak-to-peak potential separation in a cyclic voltammogram as a function of voltage scan rate. The method is applied to the case of the ferrocene/ferrocenium couple in [C(2)mim][N(Tf)(2)] and [C(4)mim][N(Tf)(2)].

Chitosan nanoparticle as protein delivery carrier - Systematic examination of fabrication conditions for efficient loading and release

Chitosan nanoparticles fabricated via different preparation protocols have been in recent years widely studied as carriers for therapeutic proteins and genes with varying degree of effectiveness and drawbacks. This work seeks to further explore the polyionic coacervation fabrication process, and associated processing conditions under which protein encapsulation and subsequent release can be systematically and predictably manipulated so as to obtain desired effectiveness. BSA was used as a model protein which was encapsulated by either incorporation or incubation method, using the polyanion tripolyphosphate (TPP) as the coacervation crosslink agent to form chitosan-BSA-TPP nanoparticles. The BSA-loaded chitosan-TPP nanoparticles were characterized for particle size, morphology, zeta potential, BSA encapsulation efficiency, and subsequent release kinetics, which were found predominantly dependent on the factors of chitosan molecular weight, chitosan concentration, BSA loading concentration, and chitosan/TPP mass ratio. The BSA loaded nanoparticles prepared under varying conditions were in the size range of 200-580 nm, and exhibit a high positive zeta potential. Detailed sequential time frame TEM imaging of morphological change of the BSA loaded particles showed a swelling and particle degradation process. Initial burst released due to surface protein desorption and diffusion from sublayers did not relate directly to change of particle size and shape, which was eminently apparent only after 6 h. It is also notable that later stage particle degradation and disintegration did not yield a substantial follow-on release, as the remaining protein molecules, with adaptable 3-D conformation, could be tightly bound and entangled with the cationic chitosan chains. In general, this study demonstrated that the polyionic coacervation process for fabricating protein loaded chitosan nanoparticles offers simple preparation conditions and a clear processing window for manipulation of physiochemical properties of the nanoparticles (e.g., size and surface charge), which can be conditioned to exert control over protein encapsulation efficiency and subsequent release profile. The weakness of the chitosan nanoparticle system lies typically with difficulties in controlling initial burst effect in releasing large quantities of protein molecules. (C) 2007 Elsevier B.V. All rights reserved.

An array-based study of reactivity under solvent-free mechanochemical conditions-insights and trends

An array-based approach is put forward to obtain insight into reactivity under mechanochemical solvent-free conditions. We describe a survey of sixty potential reactions between twelve metal salts MX2 {(M = Cu, X-2 = (OAc)(2), (HCO2)(2), (F3CCO2)(2), (acac)(2), (F(6)acac)(2), (NO3)(2), SO4; M = Ni, X-2 = (OAc)(2), (NO3)(2), SO4; M = Zn, X-2 (OAc)(2), (NO3)(2)} and five bridging organic ligands {isonicotinic acid (HINA), 1,4-benzenedicarboxylic acid (H2BDC), acetylenedicarboxylic acid (H(2)ADC), 1,3,5-benzenetricarboxylic acid (H3BTC), 4,4'-bipyridyl (BIPY). Reaction conditions involved a ball mill, applied for 15 min at 30 Hz, without external heating. When examined by XRPD, forty of the combinations gave detectable reactions, thirty-eight with crystalline products. Of these, twenty-nine reactions were quantitative (consuming all of at least one reactant). Comparison of XRPD patterns with patterns simulated from single crystal X-ray diffraction data in the Cambridge Structural Database allowed structural identification of six products. Of particular interest are the microporous framework materials [Cu(INA)(2)] and [Cu-3(BTC)(2)] (HKUST-1) obtained by reaction of the corresponding carboxylic acids with copper acetate. Other non-porous polymers with 3-dimensional connectivity, [Ni(ADC)(H2O)(4)], or 1-dimensional connectivity, [Cu(acac)(2)(BIPY)] and [Cu(F6acac)(BIPY)] were also obtained. Reaction between zinc acetate and H2ADC gave a new product which had not previously been characterised by single-crystal X-ray crystallography, but whose XRPD pattern suggests that it is isostructural with the known nickel polymer [Ni(ADC)(H2O)(4)]. Two further isostructural nickel and zinc products were obtained in reactions between HINA and nickel nitrate and zinc nitrate. Trends observed within the array are discussed. Copper acetate and copper formate were the most effective starting materials for reaction with carboxylic acids, potentially related to the basicity of their anions and the solvating effects of the formic and acetic acid byproducts. Amongst the ligands there was a general negative corelation between melting point and reactivity. The issue of pore templating in microporous phases and the generation of new structures is also discussed in relation to the Cu(INA)(2), Cu-3(BTC)(2) and nickel nitrate-BIPY systems. Overall, the study suggests that mechanochemical reactivity between metal salts and organic ligands under solvent free conditions is remarkably general. Use of array-based approaches as demonstrated here is advocated a useful way to reveal underlying trends in reactivity under solvent free mechanochemical conditions and to highlight particular cases for more detailed study.

Increased Dispersion of Supported Gold during Methanol Carbonylation Conditions

The active site in supported gold catalysts for the carbonylation of methanol has been identified as dimers/trimers of gold which are formed from large gold particles >10 nm in diameter. Methyl iodide was found to be critical for this dispersion process and to maintain the catalyst in the active form. This study also shows that it may be possible to redisperse gold catalysts, in general, after reaction.

Beyond the ideal free distribution: More general models of predator distribution

The ideal free distribution model which relates the spatial distribution of mobile consumers to that of their resource is shown to be a limiting case of a more general model which we develop using simple concepts of diffusion. We show how the ideal free distribution model can be derived from a more general model and extended by incorporating simple models of social influences on predator spacing. First, a free distribution model based on patch switching rules, with a power-law interference term, which represents instantaneous biased diffusion is derived. A social bias term is then introduced to represent the effect of predator aggregation on predator fitness, separate from any effects which act through intake rate. The social bias term is expanded to express an optimum spacing for predators and example solutions of the resulting biased diffusion models are shown. The model demonstrates how an empirical interference coefficient, derived from measurements of predator and prey densities, may include factors expressing the impact of social spacing behaviour on fitness. We conclude that empirical values of log predator/log prey ratio may contain information about more than the relationship between consumer and resource densities. Unlike many previous models, the model shown here applies to conditions without continual input. (C) 1997 Academic Press Limited.</p>

Field observation of sequestration of uranium in iron-rich sediments under sequential reduction-oxidation conditions at the DOE Oak Ridge IFRC

At the U.S. DOE Oak Ridge Integrated Field Research Challenge (ORIFRC) site, the iron content of shallow subsurface materials (i.e. weathered saprolite) is relatively high (up to 5-6% as w/w), and therefore, the forms of the iron species present plays a critical role in the long-term sequestration of uranium. A long term pilot-scale study of the bioreduction and reoxidation of uranium conducted at the ORIFRC area 3 site, adjacent to the former S-3 disposal ponds (source zone), has provided us with the opportunity to study the impact of iron species on the sequestration of U(VI). The aqueous U(VI) concentrations at the site were decreased to below the EPA MCL through the intermittent injection of ethanol as the electron donor. Previous field tests indicated that both oxygen and nitrate could oxidize the bioreduced U(IV) and cause a short-term rebound of aqueous phase uranium concentration after the oxidative agents were delivered directly to the bioreduced zone.

A field test has been conducted to examine the long-term effect of exposure of bioreduced sediments to nitrate in contaminated groundwater for more than 1,380 days at the Area 3 site. Contaminated groundwater was allowed to invade the previously bioreduced zone via the natural groundwater gradient after an extended period in which reducing conditions were maintained and the bioreduced zone was protected from the influx of upgradient contaminated groundwater. The geochemical response to the invasion of contaminated groundwater was dependent on whether the monitoring location is in the middle or the fringe of the previously bioreduced zone. In general, the nitrate concentrations in the previously bioreduced area, increased gradually from near zero to ~50-300 mM within 200 days and then stabilized. The pH declined from bioreduced levels of 6.2-6.7 to below 5.0. Uranium concentrations rebounded in all monitoring wells but at different rates. At most locations U concentrations rebounded, declined and then rebounded again. Methane gas disappeared while a significant level (20,000 to 44,000 ppmv) N2O was found in the groundwater of monitoring wells after three years of reoxidization.

The U(IV) in sediments was mainly reoxidized to U(VI) species. Based on XANES analysis, the predominate uranium in all samples after re-oxidation was similar to a uranyl nitrate form. But the U content in the sediment remained as high as that determined after bioreduction activates were completed, indicating that much of the U is still sequestrated in situ. SEM observations of surged fine sediments revealed that clusters of colloidal-sized (200-500nm) U-containing precipitates appeared to have formed in situ, regardless from sample of FW106 in non-bioactivity control area or of pre-bioreduced FW101-2 and FW102-3. Additionally, SEM-EDS and microprobe analysis, showed that the U-containing precipitates (~1% U) in FW106 are notably higher in Fe, compared to the precipitates (~1-2.5% U) from FW101-2 and FW102-3. However, XRF analysis indicated that the U content was remained as high as 2180 and 1810 mg/kg with U/Fe ratio at 0.077 and 0.055 vs 0.037 g/g, respectively in pre-bioreduced FW101-2 and FW102-3, suggesting more U sequestrated by Fe in pre-bioreduced sediments.

Farmer perception of suitable conditions for slurry application compared with decision support system recommendations

The application of slurry nutrients to land can be associated with unintended losses to the environment depending on soil and weather conditions. Correct timing of slurry application, however, can increase plant nutrient uptake and reduce losses. A decision support system (DSS), which predicts optimum conditions for slurry spreading based on the Hybrid Soil Moisture Deficit (HSMD) model, was investigated for use as a policy tool. The DSS recommendations were compared to farmer perception of suitable conditions for slurry spreading for three soil drainage classes (well, moderate and poorly drained) to better understand on farm slurry management practices and to identify potential conflict with farmer opinion. Six farmers participated in a survey over two and a half years, during which they completed a daily diary, and their responses were compared to Soil Moisture Deficit (SMD) calculations and weather data recorded by on farm meteorological stations. The perception of land drainage quality differed between farmers and was related to their local knowledge and experience. It was found that the allocation of grass fields to HSMD drainage classes using a visual assessment method aligned farmer perception of drainage at the national scale. Farmer opinion corresponded to the theoretical understanding that slurry should not be applied when the soil is wetter than field capacity, i.e. when drainage can occur. While weather and soil conditions (especially trafficability) were the principal reasons given by farmers not to spread slurry, farm management practices (grazing and silage) and current Nitrates Directive policies (closed winter period for spreading) combined with limited storage capacities were obstacles to utilisation of slurry nutrients. Despite the slightly more restrictive advice of the DSS regarding the number of suitable spreading opportunities, the system has potential to address an information deficit that would help farmers to reduce nutrient losses and optimise plant nutrient uptake by improved slurry management. The DSS advice was in general agreement with the farmers and, therefore, they should not be resistant to adopting the tool for day to day management.

How Prepared are UK Medical Graduates for Practice? Final report from a programme of research commissioned by the General Medical Council

This programme of research aimed to understand the extent to which current UK medical graduates are prepared for practice. Commissioned by the General Medical Council, we conducted: (1) A Rapid Review of the literature between 2009 and 2013; (2) narrative interviews with a range of stakeholders; and (3) longitudinal audio-diaries with Foundation Year 1 doctors. The Rapid Review (RR) resulted in data from 81 manuscripts being extracted and mapped against a coding framework (including outcomes from Tomorrow's Doctors (2009) (TD09)). A narrative synthesis of the data was undertaken. Narrative interviews were conducted with 185 participants from 8 stakeholder groups: F1 trainees, newly registered trainee doctors, clinical educators, undergraduate and postgraduate deans and foundation programme directors, other healthcare professionals, employers, policy and government and patient and public representatives. Longitudinal audio-diaries were recorded by 26 F1 trainees over 4 months. The data were analysed thematically and mapped against TD09. Together these data shed light onto how preparedness for practice is conceptualised, measured, how prepared UK medical graduates are for practice, the effectiveness of transition interventions and the currently debated issue of bringing full registration forward to align with medical students’ graduation. Preparedness for practice was conceptualised as both a long- and short-term venture that included personal readiness as well as knowledge, skills and attitudes. It has mainly been researched using self-report measures of generalised incidents that have been shown to be problematic. In terms of transition interventions: assistantships were found to be valuable and efficacious for proactive students as team members, shadowing is effective when undertaken close to employment/setting of F1 post and induction is generally effective but of inconsistent quality. The August transition was highlighted in our interview and audio-diary data where F1s felt unprepared, particularly for the step-change in responsibility, workload, degree of multitasking and understanding where to go for help. Evidence of preparedness for specific tasks, skills and knowledge was contradictory: trainees are well prepared for some practical procedures but not others, reasonably well prepared for history taking and full physical examinations, but mostly unprepared for adopting an holistic understanding of the patient, involving patients in their care, safe and legal prescribing, diagnosing and managing complex clinical conditions and providing immediate care in medical emergencies. Evidence for preparedness for interactional and interpersonal aspects of practice was inconsistent with some studies in the RR suggesting graduates were prepared for team working and communicating with colleagues and patients, but other studies contradicting this. Interview and audio-diary data highlights concerns around F1s preparedness for communicating with angry or upset patients and relatives, breaking bad news, communicating with the wider team (including interprofessionally) and handover communication. There was some evidence in the RR to suggest that graduates were unprepared for dealing with error and safety incidents and lack an understanding of how the clinical environment works. Interview and audio-diary data backs this up, adding that F1s are also unprepared for understanding financial aspects of healthcare. In terms of being personally prepared, RR, interview and audio diary evidence is mixed around graduates’ preparedness for identifying their own limitations, but all data points to graduates’ difficulties in the domain of time management. In terms of personal and situational demographic factors, the RR found that gender did not typically predict perceptions of preparedness, but graduates from more recent cohorts, graduate entry students, graduates from problem based learning courses, UK educated graduates and graduates with an integrated degree reported feeling better prepared. The longitudinal audio-diaries provided insights into the preparedness journey for F1s. There seems to be a general development in the direction of trainees feeling more confident and competent as they gain more experience. However, these developments were not necessarily linear as challenging circumstances (e.g. new specialty, new colleagues, lack of staffing) sometimes made them feel unprepared for situations where they had previously indicated preparedness.

Musculoskeletal (MSK) and Sport and Exercise Medicine (SEM) in General Practice (GP): A Novel GP-based MSK and SEM Clinic for Managing Musculoskeletal symptoms in a GP

Musculoskeletal (MSK) complaints are common within primary care (1) (2) (3) but some General Practitioners (GPs)/family physicians do not feel comfortable managing these symptoms (3), preferring to refer onto hospital specialists or Integrated Clinical Assessment and Treatment Services (ICATs). Long waiting times for hospital outpatient reviews are a major cause of patient inconvenience and complaints (4). We therefore aimed to establish a GP-ran MSK and sport and exercise medicine (SEM) clinic based within a Belfast GP surgery that would contribute to a sustainable improvement in managing these common conditions within primary care as well as reducing waiting times for patients with these conditions to see a specialist. This shift from hospital-based to community-based management is in-keeping with recent policy changes within the UK health-system, including Transforming Your Care within Northern Ireland (NI) (5). The GP-ran MSK and SEM clinic was held monthly within a Belfast GP practice, staffed by one GP with a specialist interest in MSK and SEM conditions and its performance was reviewed over a three month period. Parameters audited included cases seen, orthopaedic and x-ray referral rates and secondary care referrals comparing the GP practice’s performance to the same time period in the previous year as well as patient satisfaction questionnaires.

Musculoskeletal (MSK) and Sport and Exercise Medicine (SEM) in General Practice (GP): A Novel GP-based clinic

The problem-Musculoskeletal (MSK) symptoms are common within primary care but some GPs are not comfortable managing these; waiting times for hospital appointments are a major cause of patients’ complaints. Current UK healthcare policies emphasise a need for more community-based management. We aimed to pilot an innovative general practice-based clinic to improve the management of MSK and Sport and Exercise Medicine (SEM) symptoms within general practice.

The approach-This project was conducted in an inner-city practice of approximately 9,000 patients and 5 GP partners. The practice commissioned a novel monthly 4-hour clinic staffed by one GP with a specialist interest in MSK and SEM conditions. Each patient was allocated a 20-minute appointment. All primary care staff within the practice could refer any patient for whom they considered hospital referral appropriate, with no specific exclusion criteria. Management plans included injection therapy, exercise prescription and onward referral. After three months (August-October 2014) numbers of consultations, sources of referral, reasons for referral and management outcomes were described; patient satisfaction was assessed by questionnaire, offered to 10 randomly selected patients by reception staff and self-completed by patients. Costs of the clinic were compared to current options.

Findings- All patients (14 males; 21 females; aged 35-77 years), were seen within four weeks of referral (one third of orthopaedic referrals in 2013 waited over 9 weeks for appointment). Most were referred from other GPs; some came from physiotherapy and podiatry. Shoulder problems were the most frequent reason for referral. The commonest management option was steroid injection, with most patients being given advice regarding exercise and analgesia; there were 3 onward referrals (2 physiotherapy; 1 rheumatology).

Comparing August-October data in 2014 and 2013, total, orthopaedic and rheumatology referrals were reduced by 147, 2 and 3, respectively; within the practice MSK presentations and physiotherapy and x-ray referrals were 60, 47 and 90 fewer, respectively.

The cost per attendance at the clinic was £61; initial orthopaedic-ICAT assessments cost £82 and a consultant appointment £213.

Satisfaction questionnaires were returned by all 10 selected participants and provided positive feedback, expressing preference for community-based, rather than hospital, management.

Consequence- Our pilot study indicates that this novel service model has potential for efficient and effective management of MSK and SEM complaints in primary care, reducing the need for hospital referral and the clinical burden on general practices. The innovation deserves further evaluation in a full-scale trial to determine its generalisability to other practice settings and populations.