A generic tool for cost estimating in aircraft design

A methodology to estimate the cost implications of design decisions by integrating cost as a design parameter at an early design stage is presented. The model is developed on a hierarchical basis, the manufacturing cost of aircraft fuselage panels being analysed in this paper. The manufacturing cost modelling is original and relies on a genetic-causal method where the drivers of each element of cost are identified relative to the process capability. The cost model is then extended to life cycle costing by computing the Direct Operating Cost as a function of acquisition cost and fuel burn, and coupled with a semi-empirical numerical analysis using Engineering Sciences Data Unit reference data to model the structural integrity of the fuselage shell with regard to material failure and various modes of buckling. The main finding of the paper is that the traditional minimum weight condition is a dated and sub-optimal approach to airframe structural design.

Application-based workload model for wireless sensor node computing platforms

Wireless sensor node platforms are very diversified and very constrained, particularly in power consumption. When choosing or sizing a platform for a given application, it is necessary to be able to evaluate in an early design stage the impact of those choices. Applied to the computing platform implemented on the sensor node, it requires a good understanding of the workload it must perform. Nevertheless, this workload is highly application-dependent. It depends on the data sampling frequency together with application-specific data processing and management. It is thus necessary to have a model that can represent the workload of applications with various needs and characteristics. In this paper, we propose a workload model for wireless sensor node computing platforms. This model is based on a synthetic application that models the different computational tasks that the computing platform will perform to process sensor data. It allows to model the workload of various different applications by tuning data sampling rate and processing. A case study is performed by modeling different applications and by showing how it can be used for workload characterization. © 2011 IEEE.

Early Implementation of BIM into a Cold-Formed Steel Design/ Fabricator and an Architectural/Planning Consultancy

There is a broad consensus surrounding the ability of building information modelling (BIM) to positively impact a project by enabling greater collaboration. This paper aims to examine the development of BIM and how it can contribute to the evermore present and growing cold-formed steel (CFS) industry. This is achieved thorough a comprehensive literature review and four exploratory interviews with industry experts. Work has been carried out, for the first time, alongside one of the UK’s largest CFS Designer/Fabricators in conjunction with Northern Ireland’s leading Architectural and Town Planning Consultants in the identification and dissemination of information. The capabilities of BIM have been investigated through modeling of simple CFS structures n consultation with the project partners. By scrutinising the literature and associated interviews, the primary opportunities, as well as barriers, of BIM implementation have been investigated in the context of these companies. It is essential to develop greater understanding of the flexibility, adaptability and interoperability of BIM software as the UK construction industry faces a daunting challenge; fully collaborative 3D BIM as required by the UK Government under the “Government Construction Strategy” by 2016 in all public sector projects. This paper, and the wider study that it stems from, approaches the problem from a new angle, from sections of the construction industry that have not yet fully embedded BIM.

Integrating Aircraft Cost Modelling into Conceptual Design

The article presents cost modeling results from the application of the Genetic-Causal cost modeling principle. Industrial results from redesign are also presented to verify the opportunity for early concept cost optimization by using Genetic-Causal cost drivers to guide the conceptual design process for structural assemblies. The acquisition cost is considered through the modeling of the recurring unit cost and non-recurring design cost. The operational cost is modeled relative to acquisition cost and fuel burn for predominately metal or composites designs. The main contribution of this study is the application of the Genetic-Causal principle to the modeling of cost, helping to understand how conceptual design parameters impact on cost, and linking that to customer requirements and life cycle cost.

A Multicenter, Randomised Open Study of Early Corticosteroid Treatment (OSECT) in Preterm Infants With Respiratory Illness: Comparison of Early and Late Treatment and of Dexamethasone and Inhaled Budesonide

AIM: To compare early (15 days) steroid therapy and dexamethasone with inhaled budesonide in very preterm infants at risk of developing chronic lung disease. METHODS: Five hundred seventy infants from 47 neonatal intensive care units were enrolled. Criteria for enrollment included gestational age 30%. Infants were randomly allocated to 1 of 4 treatment groups in a factorial design: early (15 days) dexamethasone, and delayed selective budesonide. Dexamethasone was given in a tapering course beginning with 0.50 mg/kg/day in 2 divided doses for 3 days reducing by half until 12 days of therapy had elapsed. Budesonide was administered by metered dose inhaler and a spacing chamber in a dose of 400 microg/kg twice daily for 12 days. Delayed selective treatment was started if infants needed mechanical ventilation and >30% oxygen for >15 days. The factorial design allowed 2 major comparisons: early versus late treatment and systemic dexamethasone versus inhaled budesonide. The primary outcome was death or oxygen dependency at 36 weeks and analysis was on an intention-to-treat basis. Secondary outcome measures included death or major cerebral abnormality, duration of oxygen treatment, and complications of prematurity. Adverse effects were also monitored daily. RESULTS: There were no significant differences among the groups for the primary outcome. Early steroid treatment was associated with a lower primary outcome rate (odds ratio [OR]: 0.85; 95% confidence interval [CI]: 0.61,1.18) but even after adjustment for confounding variables the difference remained nonsignificant. Dexamethasone-treated infants also had a lower primary outcome rate (OR: 0.86; 95% CI: 0.62,1.20) but again this difference remained not significant after adjustment. For death before discharge, dexamethasone and early treatment had worse outcomes than budesonide and delayed selective treatment (OR: 1.42; 95% CI: 0.93,2.16; OR: 1.51; 95% CI: 0.99,2.30 after adjustment, respectively) with the results not quite reaching significance. Duration of supplementary oxygen was shorter in the early dexamethasone group (median: 31 days vs 40-44 days). Early dexamethasone was also associated with increased weight loss during the first 12 days of treatment (52 g vs 3 g) compared with early budesonide, but over 30 days there was no difference. In the early dexamethasone group, there was a reduced incidence of persistent ductus arteriosus (34% vs 52%-59%) and an increased risk of hyperglycemia (55% vs 29%-34%) compared with the other 3 groups. Dexamethasone was associated with an increased risk of hypertension and gastrointestinal problems compared with budesonide but only the former attained significance. CONCLUSIONS: Infants given early treatment and dexamethasone therapy had improved survival without chronic lung disease at 36 weeks compared with those given delayed selective treatment and inhaled budesonide, respectively, but results for survival to discharge were in the opposite direction; however, none of these findings attained statistical significance. Early dexamethasone treatment reduced the risk of persistent ductus arteriosus. Inhaled budesonide may be safer than dexamethasone, but there is no clear evidence that it is more or less effective

Rapid Early Growth is Associated With Increased Risk of Childhood Type 1 Diabetes in Various European Populations

OBJECTIVE: To confirm that early growth is associated with type 1 diabetes risk in European children and elucidate any role of infant feeding. RESEARCH DESIGN AND METHODS: Five centers participated, each with a population-based register of type 1 diabetes diagnosed at

Source/drain extension region engineering in nanoscale double gate SOI MOSFETs: Novel design methodology for low-voltage analog applications

The present paper proposes for the first time, a novel design methodology based on the optimization of source/drain extension (SDE) regions to significantly improve the trade-off between intrinsic voltage gain (A(vo)) and cut-off frequency (f(T)) in nanoscale double gate (DG) devices. Our results show that an optimally designed 25 nm gate length SDE region engineered DG MOSFET operating at drain current of 10 mu A/mu m, exhibits up to 65% improvement in intrinsic voltage gain and 85% in cut-off frequency over devices designed with abrupt SIDE regions. The influence of spacer width, lateral source/drain doping gradient and symmetric as well as asymmetrically designed SDE regions on key analog figures of merit (FOM) such as transconductance (g(m)), transconductance-to-current ratio (g(m)/I-ds), Early voltage (V-EA), output conductance (g(ds)) and gate capacitances are examined in detail. The present work provides new opportunities for realizing future low-voltage/low-power analog circuits with nanoscale SDE engineered DG MOSFETs. (C) 2007 Elsevier B.V. All rights reserved.

Cardiovascular disease risk profiles among 'healthy' siblings of patients with early-onset cardiovascular disease:Application of the new SCORE system

BACKGROUND: Cardiovascular disease (CVD) occurs more frequently in individuals with a family history of premature CVD. Within families the demographics of CVD are poorly described. DESIGN: We examined the risk estimation based on the Systematic Coronary Risk Evaluation (SCORE) system and the Joint British Guidelines (JBG) for older unaffected siblings of patients with premature CVD (onset ≤55 years for men and ≤60 years for women). METHODS: Between August 1999 and November 2003 laboratory and demographic details were collected on probands with early-onset CVD and their older unaffected siblings. Siblings were screened for clinically overt CVD by a standard questionnaire and 12-lead electrocardiogram (ECG). RESULTS: A total of 790 siblings was identified and full demographic details were available for 645. The following siblings were excluded: 41 with known diabetes mellitus; seven with random plasma glucose of 11.1 mmol/l or greater; and eight with ischaemic ECG. Data were analysed for 589 siblings from 405 families. The mean age was 55.0 years, 43.1% were men and 28.7% were smokers. The mean total serum cholesterol was 5.8 mmol/l and hypertension was present in 49.4%. Using the SCORE system, when projected to age 60 years, 181 men (71.3%) and 67 women (20.0%) would be eligible for risk factor modification. Using JBG with a 10-year risk of 20% or greater, 42 men (16.5%) and four women (1.2%) would be targeted. CONCLUSIONS: Large numbers of these asymptomatic individuals meet both European and British guidelines for the primary prevention of CVD and should be targeted for risk factor modification. The prevalence of individuals defined as eligible for treatment is much higher when using the SCORE system. © 2007 European Society of Cardiology.

An experience of attempting to apply the randomised controlled trial (RCT) design in a ‘real world’ community-based clinical setting – one family therapist’s current journey. Context, 99, 6-9.

This paper describes an early career researcher's expereince of using randomised controlled trial methodology to investigarte the effectiveness of psychotherapeutic interventions for traumatised families in a 'real world' setting.

The Design Process- Making It Relevant For Students

Within the ever-changing arenas of architectural design and education, the core element of architectural education remains: that of the design process. The consideration of how to design in addition to what to design presents architectural educators with that most constant and demanding challenge of how do we best teach the design process?

This challenge is arguably most acute at a student's early stages of their architectural education. In their first years in architecture, students will commonly concentrate on the end product rather than the process. This is, in many ways, understandable. A great deal of time, money and effort go into their final presentations. They believe that it is what is on the wall that is going to be assessed. Armed with new computer skills, they want to produce eye-catching graphics that are often no more than a celebration of a CAD package. In an era of increasing speed, immediacy of information and powerful advertising it is unsurprising that students want to race quickly to presenting an end-product.

Recognising that trend, new teaching methods and models were introduced into the second year undergraduate studio over the past two years at Queen's University Belfast, aimed at promoting student self-reflection and making the design process more relevant to the students. This paper will first generate a critical discussion on the difficulties associated with the design process before outlining some of the methods employed to help promote the following; an understanding of concept, personalisation of the design process for the individual student; adding realism and value to the design process and finally, getting he students to play to their strengths in illustrating their design process like an element of product. Frameworks, examples, outcomes and student feedback will all be presented to help illustrate the effectiveness of the new strategies employed in making the design process firstly, more relevant and therefore secondly, of greater value, to the architecture student.

"The pride of noise": drums and their repercussions in early modern England

This article draws on a wide range of literary and archival sources in order to explore the cultural resonances of drumming in England during the 16th and 17th centuries. It concentrates not on instrument design and playing techniques but on the varied meanings that contemporaries attached to the ubiquitous sound of the drum. The discussion begins and ends with the unmistakable military associations of drumming. In between, consideration is also given to a range of interconnected but sometimes contradictory resonances that appear to have endowed drums with considerable cultural significance. Drums spoke, for example, of authority and they worked hard to impose order in urban streets. They also played their part in the contemporary culture of punishment, and many miscreants were subjected to the humiliation of public percussion. Beyond this, drums were particularly potent in their ability to express masculinity, and female drummers were rare and remarkable. The primal potency of the instrument also rendered it valuable to the insubordinate, and rioters—like soldiers— were regularly called together 'by the drum'. Lastly, the sound of the drum was sometimes intensely festive and could also be used to publicize special events such as dramatic performances and the display of curiosities. The repercussions of drumming were thus varied, and confusion sometimes resulted when the different possibilities became entangled.

Retinal vascular endothelial cell endocytosis increases in early diabetes.

BACKGROUND: Several physiological studies in recent years have convincingly demonstrated increased clearance of intravascular protein tracers by several different tissues, including the retina, during early diabetes and galactosemia in the rat. This change has been described as a consequence of increased permeation, although vascular leakage has not been demonstrated, and the fate of such tracers remains unelucidated. EXPERIMENTAL DESIGN: A pilot study in this laboratory showed no evidence of vascular leakage but suggested increased endocytosis of horseradish peroxidase (HRP) by retinal vascular endothelial cells (RVECs) in early diabetes. We therefore quantified RVEC endocytosis in normal, streptozotocin (STZ)-treated nondiabetic and STZ-diabetic rats using the design-based stereology method of "vertical sections." A duration of diabetes (6 weeks) was chosen to approximate the time period in which other workers have demonstrated increased protein permeation of the retina. RESULTS: After a 20-minute exposure to the tracer, HRP reaction product was observed in small vesicular and tubular endosomes and larger multivesicular bodies of the RVECs. Stereological analysis revealed a 6.5-fold increase in the volume of HRP-containing organelles in the RVECs of diabetic rats compared with STZ-treated nondiabetics or normal controls. None of the animals in this study showed HRP reaction product outside the retinal vascular endothelium. CONCLUSIONS: A highly significant increase in RVEC endocytosis occurs in early diabetes. Increased RVEC endocytosis may contribute to the observed clearance of intravascular protein tracers by the retina during early diabetes.