Application of Heuristic Evaluation Method by Universal Design Experts

This study highlights how heuristic evaluation as a usability evaluation method can feed into current building design practice to conform to universal design principles. It provides a definition of universal usability that is applicable to an architectural design context. It takes the seven universal design principles as a set of heuristics and applies an iterative sequence of heuristic evaluation in a shopping mall, aiming to achieve a cost-effective evaluation process. The evaluation was composed of three consecutive sessions. First, five evaluators from different professions were interviewed regarding the construction drawings in terms of universal design principles. Then, each evaluator was asked to perform the predefined task scenarios. In subsequent interviews, the evaluators were asked to re-analyze the construction drawings. The results showed that heuristic evaluation could successfully integrate universal usability into current building design practice in two ways: (i) it promoted an iterative evaluation process combined with multi-sessions rather than relying on one evaluator and on one evaluation session to find the maximum number of usability problems, and (ii) it highlighted the necessity of an interdisciplinary ad hoc committee regarding the heuristic abilities of each profession. A multi-session and interdisciplinary heuristic evaluation method can save both the project budget and the required time, while ensuring a reduced error rate for the universal usage of the built environments.

A Novel Method to Enable Trade-offs Across the Whole Product Life of an Aircraft Using Value Driven Design

The increasing need to understand complex products and systems with long life spans, presents a significant challenge to designers who increasingly require a broader understanding of the operational aspects of the system. This demands an evolution in current design practice, as designers are often constrained to provide a subsystem solution without full knowledge of the global system operation. Recently there has been a push to consider value centric approaches which should facilitate better or more rapid convergence to design solutions with predictable completion schedules. Value Driven Design is one such approach, in which value is used as the system top level objective function. This provides a broader view of the system and enables all sub-systems and components to be designed with a view to the effect on project value. It also has the capacity to include value expressions for more qualitative aspects, such as environmental impact. However, application of the method to date has been restricted to comparing value in a programme where the lifespan is fixed and known a priori. This paper takes a novel view of value driven design through the surplus value objective function, and shows how it can be used to identify key sensitivities to guide designers in design trade-off decisions. By considering a new time based approach it can be used to identify optimum programme life-span and hence allow trade-offs over the whole product life.

Optimization of Composite Structures to Delay Mode Jump Instabilities

Numerous studies have shown that postbuckling stiffened panels may undergo abrupt changes in buckled mode
shape when loaded in uniaxial compression. This phenomenon is often referred to as a mode jump or secondary
instability. The resulting sudden release of stored energy may initiate damage in vulnerable regions within a
structure, for example, at the skin-stiffener interface of a stiffened composite panel. Current design practice is to
remove a mode jump by increasing the skin thickness of the postbuckling region. A layup optimization methodology,
based on a genetic algorithm, is presented, which delays the onset of secondary instabilities in a composite structure
while maintaining a constant weight and subject to a number of design constraints. A finite element model was
developed of a stiffened panel’s skin bay, which exhibited secondary instabilities. An automated numerical routine
extracted information directly from the finite element displacement results to detect the onset of initial buckling and
secondary instabilities. This routine was linked to the genetic algorithm to find a revised layup for the skin bay, within
appropriate design constraints, to delay the onset of secondary instabilities. The layup optimization methodology,
resulted in a panel that had a higher buckling load, prebuckling stiffness, and secondary instability load than the
baseline design.

Design and Practice in Architectural Theory Education

Benefiting from design in theory learning is not common in architecture schools. The general practice is to design in studio and to theorise in lectures. In the undergraduate module History and Theory in Architecture II at Queen’s University Belfast, students attend interactive lectures, participate in reading group discussions, design TextObjects, and write essays. TextObjects contain textual, audio and/or graphic representations that highlight a single concept or a complex set of issues derived from readings. Students experiment with diverse media, such as filmmaking, photography, and graphic design, some of which they experience for the first time. Lectures and readings revolve around theories of architectural representation, media and communication, which are practiced through TextObjects. This is a new way to link theory and practice in architectural education. Through action research, this study analyses this innovative teaching method called TextObject, which brings design and practice into architectural theory education to stimulate students towards critical thinking. The pedagogical research of architectural theoretician Necdet Teymur (1992, 1996, 2002) underlies the study.

The efficacy of a CDIO based integrated curriculum as preparation for professional practice in product design and development

The School of Mechanical and Aerospace Engineering at Queen’s University Belfast started BEng and MEng degree programmes in Product Design and Development (PDD) in 2004. Intended from the outset to be significantly different from the existing programmes within the School the PDD degrees used the syllabus and standards defined by the CDIO Initiative as the basis for an integrated curriculum. Students are taught in the context of conceiving, designing, implementing and operating a product. Fundamental to this approach is a core sequence of Design-Build-Test (DBT) experiences which facilitates the development of a range of professional skills as well as the immediate application of technical knowledge gained in strategically aligned supporting modules.
The key objective of the degree programmes is to better prepare students for professional practice. PDD graduates were surveyed using a questionnaire developed by the CDIO founders and interviewed to examine the efficacy of these degree programmes, particularly in this key objective. Graduate employment rates, self assessment of graduate attributes and examples of work produced by MEng graduates provided positive evidence that their capabilities met the requirements of the profession. The 24% questionnaire response rate from the 96 graduates to date did not however facilitate statistically significant conclusions to be drawn and particularly not for BEng graduates who were under represented in the response group. While not providing proof of efficacy the investigation did provide a good amount of useful data for consideration as part of a continuous improvement process.

Design and Development of a Film-based Intervention about Teenage Men and Unintended Pregnancy: Applying the Medical Research Council Framework in Practice

Following the UK Medical Research Council’s (MRC) guidelines for the development and evaluation of complex interventions, this study aimed to design, develop and optimise an educational intervention about young men and unintended teenage pregnancy based around an interactive film. The process involved identification of the relevant evidence base, development of a theoretical understanding of the phenomenon of unintended teenage pregnancy in relation to young men, and exploratory mixed methods research. The result was an evidence-based, theory-informed, user-endorsed intervention designed to meet the much neglected pregnancy education needs of teenage men and intended to increase both boys’ and girls’ intentions to avoid an unplanned pregnancy during adolescence. In prioritising the development phase, this paper addresses a gap in the literature on the processes of research-informed intervention design. It illustrates the application of the MRC guidelines in practice while offering a critique and additional guidance to programme developers on the MRC prescribed processes of developing interventions. Key lessons learned were: 1) know and engage the target population and engage gatekeepers in addressing contextual complexities; 2) know the targeted behaviours and model a process of change; and 3) look beyond development to evaluation and implementation.

Evaluation of extended training for general practice in Northern Ireland: qualitative study.

Objective To evaluate participants' perceptions of the impact on them of an additional six months' training beyond the standard 12 month general practice vocational training scheme. Design Qualitative study using focus groups. Setting General practice vocational training in Northern Ireland. Participants 13 general practitioner registrars, six of whom participated in the additional six months' training, and four trainers involved in the additional six months' training. Main outcome measures: Participants' views about their experiences in 18 month and 12 month courses. Results Participants reported that the 12 month course was generally positive but was too pressurised and focused on examinations, and also that it had a negative impact on self care. The nature of the learning and assessment was reported to have left participants feeling averse to further continuing education and lacking in confidence. In contrast, the extended six month component was reported to have restimulated learning by focusing more on patient care and promoting self directed learning. It developed confidence, promoted teamwork, and gave experience of two practice contexts, and was reported as valuable by both ex-registrars and trainers. However, both the 12 and 18 month courses left participants feeling underprepared for practice management and self care. Conclusions 12 months' training in general practice does not provide doctors with the necessary competencies and confidence to enter independent practice. The extended period was reported to promote greater professional development, critical evaluation skills, and orientation to lifelong learning but does not fill all the gaps.

The SPHERE Study: Secondary prevention of heart disease in general practice: protocol of a randomised controlled trial of tailored practice and patient care plans with parallel qualitative, economic and policy analyses. [ISRCTN24081411]

Background: The aim of the SPHERE study is to design, implement and evaluate tailored practice and personal care plans to improve the process of care and objective clinical outcomes for patients with established coronary heart disease (CHD) in general practice across two different health systems on the island of Ireland.CHD is a common cause of death and a significant cause of morbidity in Ireland. Secondary prevention has been recommended as a key strategy for reducing levels of CHD mortality and general practice has been highlighted as an ideal setting for secondary prevention initiatives. Current indications suggest that there is considerable room for improvement in the provision of secondary prevention for patients with established heart disease on the island of Ireland. The review literature recommends structured programmes with continued support and follow-up of patients; the provision of training, tailored to practice needs of access to evidence of effectiveness of secondary prevention; structured recall programmes that also take account of individual practice needs; and patient-centred consultations accompanied by attention to disease management guidelines.

Methods: SPHERE is a cluster randomised controlled trial, with practice-level randomisation to intervention and control groups, recruiting 960 patients from 48 practices in three study centres (Belfast, Dublin and Galway). Primary outcomes are blood pressure, total cholesterol, physical and mental health status (SF-12) and hospital re-admissions. The intervention takes place over two years and data is collected at baseline, one-year and two-year follow-up. Data is obtained from medical charts, consultations with practitioners, and patient postal questionnaires. The SPHERE intervention involves the implementation of a structured systematic programme of care for patients with CHD attending general practice. It is a multi-faceted intervention that has been developed to respond to barriers and solutions to optimal secondary prevention identified in preliminary qualitative research with practitioners and patients. General practitioners and practice nurses attend training sessions in facilitating behaviour change and medication prescribing guidelines for secondary prevention of CHD. Patients are invited to attend regular four-monthly consultations over two years, during which targets and goals for secondary prevention are set and reviewed. The analysis will be strengthened by economic, policy and qualitative components.

Using the opinions of coronary heart disease patients in designing a health education booklet for use in general practice consultations.

Objective This study explored how coronary heart disease (CHD) patients’ views would inform the design of an information booklet aimed at providing patients and practitioners with a resource to help influence positively patients’ health behaviour outcomes. Methods Opinions of patients (N=23) with CHD about their information needs, particularly lifestyle advice, were explored using a qualitative approach in four general practices. This information was used in designing a booklet for a pilot study intervention aimed at promoting healthy lifestyle behaviours and medication adherence among people with CHD. Subsequent focus groups explored patients’ (N=17) opinions about the booklet’s ‘fitness for purpose’; semi-structured interviews with practitioners (N=10) examined their views on the booklet’s usefulness. Results In initial focus groups patients identified gaps in their information provision regarding coping with stress, available local community support and medication purpose. A booklet, prepared on the basis of previous literature, was modified to address these gaps. Pilot study patients were satisfied with the re-designed booklet and practitioners reported that its use in consultations enabled change implementation and facilitated patients’ understanding of connections between lifestyle and health outcomes. Conclusion Acknowledging the opinions of CHD patients in producing health information booklets which emphasised a patient centred approach supported practitioner-patient partnerships for choosing healthy lifestyle choices.

Tooth loss and implant outcomes in patients refractory to treatment in a periodontal practice

Aim: The aim of this study was to investigate the factors associated with continued significant tooth loss due to periodontal reasons during maintenance following periodontal therapy in a specialist periodontal practice in Norway.
Material and Methods: A case-control design was used. Refractory cases were patients who lost multiple teeth during a maintenance period of 13.4 (range 8-19) years following definitive periodontal treatment in a specialist practice. Controls were age- and gender-matched maintenance patients from the same practice. Characteristics and treatment outcomes were assessed, and all teeth classified as being lost due to periodontal disease during follow-up were identified. The use of implants in refractory cases and any complications relating to such a treatment were recorded.
Results: Only 27 (2.2%) patients who received periodontal treatment between 1986 and 1998 in a specialist practice met the criteria for inclusion in the refractory to treatment group. Each refractory subject lost 10.4 (range 4-16) teeth, which represented 50% of the teeth present at baseline. The rate of tooth loss in the refractory group was 0.78 teeth per year, which was 35 times greater than that in the control group. Multivariate analysis indicated that being in the refractory group was predicted by heavy smoking (p=0.026), being stressed (p=0.016) or having a family history of periodontitis (p=0.002). Implants were placed in 14 of the refractory patients and nine (64%) of these lost at least one implant. In total, 17 (25%) of the implants placed in the refractory group were lost during the study period.
Conclusions: A small number of periodontal maintenance patients are refractive to treatment and go on to experience significant tooth loss. These subjects also have a high level of implant complications and failure. Heavy smoking, stress and a family history of periodontal disease were identified as factors associated with a refractory outcome.