Efficiency analysis of flat plate collectors for building facade integration

A theoretical approach has been used to evaluate the performance of facade integrated solar collectors based on the physical collector parameters such as absorber plate absorptance, transmittance of the glazed cover plate and insulation thickness. A 1D steady state model, based on the Hottel Whillier Bliss equation, was employed to determine the effect of changing parameters to meet façade integration criteria.

Parametric Analysis of Concrete Solar Collectors

Concrete solar collectors offer a type of solar collector with structural, aesthetic and economic advantages over current populartechnologies. This study examines the influential parameters of concrete solar collectors. In addition to the external conditions,the performance of a concrete solar collector is influenced by the thermal properties of the concrete matrix, piping network andfluid. Geometric and fluid flow parameters also influence the performance of the concrete solar collector. A literature review ofconcrete solar collectors is conducted in order to define the benchmark parameters from which individual parameters are thencompared. The numerical model consists of a 1D pipe flow network coupled with the heat transfer in a 3D concrete domain. Thispaper is concerned with the physical parameters that define the concrete solar collector, thus a constant surface temperature isused as the exposed surface boundary condition with all other surfaces being insulated. Results show that, of the parametersinvestigated, the pipe spacing, ps, concrete conductivity, kc, and the pipe embedment depth, demb, are among those parameterswhich have greatest effect on the collector’s performance. The optimum balance between these parameters is presented withrespect to the thermal performance and discussed with reference to practical development issues.

Identification of an unknown b-agonist in feed by liquid chromatography/bioassay/quadrupole time-of-flight tandem mass spectrometry with accurate mass measurement.

A new approach to the search for residues of unknown growth promoting agents such as anabolic steroids and -agonists in feed is presented. Following primary extraction and clean-up, samples are separated using gradient liquid chromatography (LC). The effluent is split towards two identical 96-well fraction collectors and an optional electrospray quadrupole time-of-flight mass spectrometry (QTOFMS) system for accurate mass measurement. One 96-well plate is used for a bioassay (enzyme-immuno assay, receptor assay) and will detect the bioactivity and position of the relevant peak in the chromatogram. The positive well in the second 96-well plate is used for identification by LC/QTOFMS/MS. The value of this LC/bioassay/QTOFMS/MS methodology is highlighted by the finding and structure elucidation of a new -agonist in a feed extract.

Diel variation in egg-laying by the freshwater fish louse Argulus foliaceus (Crustacea : Branchiura)

Removal of deposited eggs could be a useful control strategy for the damaging fish ectoparasite Argulus foliaceus, but focused control requires knowledge of egg-laying patterns. Here, we investigated diel changes in the egg-laying behaviour of a natural population of A. foliaceus. Data were collected from 17-28 May 2004. Days were divided into 3 time periods: 06:00-14:00, 14:00-22:00 and 22:00-06:00 h. Significantly more egg clutches were laid from 06:00-14:00 h than during the other 2 time periods, which were not significantly different from each other. Significantly more egg clutches per hour were laid during hours of daylight as compared to hours of darkness. Significantly more egg clutches were laid in the top 1 m of the water column than at the bottom, and this was consistent throughout all 3 time periods. It is suggested that the increase in egg-laying activity during daylight hours may be due to a higher motivation to search for hosts during the night and an increased ability to locate silhouetted egg-laying sites during the day. These data can provide information useful for egg removal and control strategies.

ESTABLISHMENT OF THE ZEBRA MUSSEL DREISSENA POLYMORPHA (PALLAS, 1771) IN LOUGH NEAGH, NORTHERN IRELAND

Five adult Dreissena polymotpha were found on the hull of a boat moored in Kinnego Marina, Lough Neagh, in November 2005; this is the first indication of their presence in this large lake. This finding initiated a survey to determine whether the zebra mussel was present throughout Lough Neagh. Forty-four settled juveniles on debris were found at twenty sites around the lough shore. As a result of these findings a more extensive study was undertaken in October 2006 to examine planktonic and settled stages. Veliger larvae were at densities of 0.0211 veligers per m(-3). Spat collectors showed settlement at six out of the seven sites sampled at a mean density of 523.76 juvenile zebra mussels per m(-2). No adult zebra mussels were found on natural substratum in the lough during the shoreline survey. However, 24 adult zebra mussels, 7.5 mm to 24 mm long, were found on the hull of a boat moored in Lough Neagh.

Reproductive Patterns and Tidal Effects on Spat Settlement of Mytilus Edulis Populations in Dundrum Bay, Northern Ireland

The gametogenic and spat settlement patterns of two Mytihis edulis beds were studied in Dundrum Inner Bay, Northern Ireland. There was evidence of gonad development throughout the year with the main development period between November and March. Spawning was protracted, lasting from May to November. Slight inter-annual and inter-population differences in the riming of the phases were observed but the cycles at both beds were broadly similar to each other and to those of other British and Irish sites. Settlement occurred throughout the year and there was evidence of both primary and secondary spat settlement at both sites. Although the reproductive cycles were similar, distinct seasonal and inter-site differences in spatfall were apparent. At the Downshire Bridge bed, settlement peaked during summer and was dominated by spat in the 0•;5-1•0 mm size range. At Ballykinler, settlement levels were highest in the winter months and larger (>1 mm) spat dominated the samples. The orientation of spat collection pads also significantly affected numbers of the larger (>1 mm) spat. Collectors facing the flood tide attracted significantly more secondary settlers than ebb-facing collectors. This effect varied seasonally and was greater at the Ballykinler bed. It is suggested that hydrodynamic regimes may be an important factor in the differences in settlement patterns of M. edulis.

Behavioural, physiological and morphological adaptations of the shanny (Blennius pholis) to the intertidal habitat

Immersed shannies (Blennius pholis) showed peak locomotory activity coincident with daylight high tides. Emersion caused cessation of breathing and bradycardia though Q02 was little affected. Q02 fell, however, when the abdomen was enclosed in an impermeable sheath to block cutaneous respiration. Gulping of air into the extensively vascular oesophagus probably also acts as a means of aerial respiration. Reimmersion of fish caused a transient bradycardia followed by a tachycardia and a fall in Q02 followed subsequently by a rise. The results are discussed in relation to the behavioural, circulatory, respiratory and morphological adaptations of the shanny to the intertidal habitat.

The Secret Life of Oilbirds: New Insights into the Movement Ecology of a Unique Avian Frugivore

Background: Steatornis caripensis (the oilbird) is a very unusual bird. It supposedly never sees daylight, roosting in huge aggregations in caves during the day and bringing back fruit to the cave at night. As a consequence a large number of the seeds from the fruit they feed upon germinate in the cave and spoil.

In Situ Formation of Micron-Scale Li-Metal Anodes with High Cyclability

Scanning probe microscopy methods have been used to electrodeposit and cycle micron-scale Li anodes deposited electrochemically under nanofabricated Au current collectors. An average Li volume of 5 x 10(8) nm(3) was deposited and cycled with 100% coulombic efficiency for similar to 160 cycles. Integrated charge/discharge values agree with before/after topography, as well as in situ dilatometry, suggesting this is a reliable method to study solid-state electrochemical processes. In this work we illustrate the possibility to deposit highly cyclable nanometer thick Li electrodes by mature SPM and nanofab techniques which can pave the way for inexpensive nanoscale battery arrays. 

Field Measurements of a Full Scale Tidal Device

Field testing studies are required for tidal turbine device developers to determine the performance of their turbines in tidal flows. Full-scale testing of the SCHOTTEL tidal turbine has been conducted at Queen’s University Belfast’s tidal site at Strangford Lough, NI. The device was mounted on a floating barge. Testing was conducted over 48 days, for 288 h, during flood tides in daylight hours. Several instruments were deployed, resulting in an expansive data set. The performance results from this data set are presented here. The device, rated to 50 kW at 2.75 m/s was tested in flows up to 2.5 m/s, producing up to 19 kW, when time-averaged. The thrust on the turbine reached 17 kN in the maximum flow. The maximum system efficiency of the turbine in these flows reached 35%. The test campaign was very successful and further tests may be conducted at higher flow speeds in a similar tidal environment.

Octave Uzanne’s L’Éventail: a literary mythology of the fan

In the last half of the nineteenth century, the folding fan was phenomenally popular in France. The accessory was a ubiquitous component of women’s dress, yet it also attracted the attention of some prominent collectors and Orientalists as well as acquiring an importance in the art and literature of the period. In many plastic works and literary texts devoted to it, the fan retains a link with femininity, and particularly with feminine sexuality, even as its identity as an art object is emphasized. Octave Uzanne’s L’Éventail (1882), a self-professed literary history of the fan, exemplifies this dualistic treatment as it presents the fan both as a titillating intimate companion of women and as a literary and (although to a lesser extent) art historical subject. This article focuses on Uzanne’s treatment of the fan’s early history in the Far and Middle East. By comparing his text with other contemporary histories of the fan, it demonstrates that the “history” of the accessory may be more accurately described as a mythology.

Development of a Polymer-carbon Nanotubes based Economic Solar Collector

A low cost solar collector was developed by using polymeric components as opposed to metal and glass components of traditional solar collectors. In order to utilize polymers for the absorber of the solar collector, Carbon Nanotubes (CNT) has been added as a filler to improve the thermal conductivity and the solar absorptivity of polymers. The solar collector was designed as a multi-layer construction with considering the economic manufacturing. Through the mathematical heat transfer analysis, the performance and characteristics of the designed solar collector have been estimated. Furthermore, the prototypes of the proposed system were built and tested at a state-of-the-art solar simulator facility to evaluate the actual performance of the developed solar collector. The cost-effective polymer-CNT solar collector, which achieved efficiency as much as that of a conventional glazed flat plate solar panel, has been successfully developed.

Orange Zinc Germanate with Metallic Ge-Ge Bonds as a Chromophore-Like Center for Visible-Light-Driven Water Splitting

The efficiency of solar-energy-conversion devices depends on the absorption region and intensity of the photon collectors. Organic chromophores, which have been widely stabilized on inorganic semiconductors for light trapping, are limited by the interface between the chromophore and semiconductor. Herein we report a novel orange zinc germanate (Zn-Ge-O) with a chromophore-like structure, by which the absorption region can be dramatically expanded. Structural characterizations and theoretical calculations together reveal that the origin of visible-light response can be attributed to the unusual metallic Ge-Ge bonds which act in a similar way to organic chromophores. Benefiting from the enhanced light harvest, the orange Zn-Ge-O demonstrates superior capacity for solar-driven hydrogen production.

Large scale test of a novel back-pass non-perforated unglazed solar air collector

This paper describes large scale tests conducted on a novel unglazed solar air collector system. The proposed system, referred to as a back-pass solar collector (BPSC), has on-site installation and aesthetic advantages over conventional unglazed transpired solar collectors (UTSC) as it is fully integrated within a standard insulated wall panel. This paper presents the results obtained from monitoring a BPSC wall panel over one year. Measurements of temperature, wind velocity and solar irradiance were taken at multiple air mass flow rates. It is shown that the length of the collector cavities has a direct impact on the efficiency of the system. It is also shown that beyond a height-to-flow ratio of 0.023m/m³/hr/m², no additional heat output is obtained by increasing the collector height for the experimental setup in this study, but these numbers would obviously be different if the experimental setup or test environment (e.g. location and climate) change. An equation for predicting the temperature rise of the BPSC is proposed.