Coal combustion residues valorisation:Research and development on compressed brick production

This paper presents the results of an experimental investigation on compressive strength of unfired compressed brick obtained with coal combustion residues (CCRs) produced by the Niger Coal Society. Preliminary physical and optical (XRD and SEM) characterisation of coal slag, including lixiviation tests, have been carried out. Cement powder, lateritic clayey soil and sand have been chosen as stabilizing agents for bricks. 12 dosages have been tested and about 300 bricks have been produced with a hand-operated press. Results show uniaxial compressive strengths (UCSs) ranging from 4 MPa to 27 MPa for the highest cement stabilisation ratio. UCS higher than 7.5 MPa have been observed for stabilisation with 20% of laterite +10% cement after 45 days of curing. Obtained bricks showed good mechanical resistance and low weight. No health threat has been detected for the obtained samples. Study developments are oriented towards the analysis of Pozzolanic properties of CCRs, properties of hydrated lime stabilisation, thermal properties and durability assessment.© 2012 Elsevier Ltd. All rights reserved.

Coal Combustion Residuals valorisation through the production of compressed masonry brick

The Niger Coal Society (Societé Nigérienne de Charbon – SONICHAR) produces electricity for local consumption in Tefereyre, 75 km north-west from Agadez, Niger. The coal combustion residuals production is about 150,000 tons per year. In order to reduce this environmental burden and to valorize these by-products, a study focusing on their physical and chemical features as well as on the mechanical resistance of compressed brick has been undertaken. Physical characterization of coal slag, chemical and lixiviation tests have been carried out, assessing the material main parameters, verifying the presence of hazardous composites and elements and comparing the obtained results with the findings of an in-deep literary review. Cement powder has been chosen as stabilizing agent as a preliminary option. Four different dosages have been tested and bricks have been produced with a hand-operated press. Compressive strength has been tested at different days of curing. Results show remarkable uniaxial compressive strengths (UCS) for all the mixes after cure, ranging from 4MPa up to more than 20MPa for the highest stabilization ratio. UCS higher than 5MPa have been observed for 20% and 30% cement stabilization ratios after only 7 days of cure, reaching respectively about 11MPa and 13MPa after 45 days. In conclusion obtained bricks show good mechanical resistance and low weight. No health threat has been detected from the obtained sample. Study developments are oriented towards the feasibility of the utilization of low-cost, locally available stabilization means, notably clay and cohesive soils, and on thermal properties assessment.

L'accord sujet-verbe en français contemporain: une étude de variation grammaticale et sociale

Dans cet article, nous évaluons le rôle du cotexte (les facteurs internes ou linguistiques) et du contexte (les facteurs externes ou sociaux, et la situation de l’interaction) dans l’accord sujet-verbe induit par les expressions de quantité en français contemporain. Dans l’emploi de ces expressions, par exemple la majorité, le reste etc., il existe une variation entre l’accord singulier et le pluriel, qui est liée à une discordance entre le nombre syntaxique et le nombre sémantique de l’expression. Dans un premier temps, nous présentons la méthodologie d’une première enquête dont le but était d’identifier les principaux facteurs internes et externes qui ont une influence sur les accords de ce type. Dans un deuxième temps, nous présentons les résultats pour les facteurs sociaux avant d’en tirer quelques conclusions pour l’étude principale.

A proposed method for evaluating the artisanal production of recycled plastic paving blocks in West Africa

Plastic wastes, and particularly plastic bags and sachets, are a major concern for urban and rural environment in African countries. In the last years some actions have been started for the plastic recycling like the artisanal production of paving blocks with melted plastic bags and sand, albeit with differences in production processes. Nevertheless, the environmental and economic impact of such activities is still to be confirmed. The aim of this study is to propose a methodology for assessing and comparing the environmental and energetic performances of artisanal methods, and for defining the overall quality of the produced blocks. This methodology has been shaped through the analysis of
production processes operated by artisans/small enterprises in West Africa and through physic-mechanical tests on the blocks. A questionnaire which allows an insight into the process and on the product has been developed and tested over five processes. Results show that a high input energy level is observed through all the processes, while considerable savings of energy could be achieved. Moreover, tests results confirmed the importance of the utilised plastic concerning thermal dilatation, mechanical resistance at higher temperature and cooling-shrinkage effects. In conclusion, doubts remain about the technical and environmental effectiveness of the sampled experiences, durability of the products and sustainability of this approach. Nevertheless, being the collection and recycling of plastic wastes a potential income generation activity for marginalised social groups in urban environment, a process optimisation could improve the impact of blocks production. Alternative recycling activities should also be considered.

Tunnel spoil classification and applicability of lime addition in weak formations for muck reuse

Tunnel construction planning requires careful consideration of the spoil management part, as this involves environmental, economic and legal requirements. In this paper a methodological approach that considers the interaction between technical and geological factors in determining the features of the resulting muck is proposed. This gives indications about the required treatments as well as laboratory and field characterisation tests to be performed to assess muck recovery alternatives. While this reuse is an opportunity for excavations in good quality homogeneous grounds (e.g. granitic mass), it is critical for complex formation. This approach has been validated, at present, for three different geo-materials resulting from a tunnel excavation carried out with a large diameter Earth Pressure Balance Shield (EPB) through a complex geological succession. Physical parameters and technological features of the three materials have been assessed, according to their valorisation potential, for defining re-utilisation patterns. The methodology proved to be effective and the laboratory tests carried out on the three materials allowed the suitability and treatment effectiveness for each muck recovery strategy to be defined. © 2014 Elsevier Ltd.

Frédéric Dard: Romans de la nuit

Préface et notices accompagant la republication de sept romans parus dans la collection Spécial Police dans les années 1950 et 1960. Ces romans de suspenses psychologiques à l'atmosphère sombre, inquiétante étaient parfois désignés par les initiés sous le nom de « Romans de la nuit ».
Cette anthologie regroupe sous ce titre sept oeuvres dont l'intrigue prend la forme d'un piège à la mécanique implacable, ainsi resituées dans leur contexte culturel

. Cette mort dont tu parlais
• C'est toi le venin
• Des yeux pour pleurer
• Le Monte-charge
• L'homme de l'avenue
• La Pelouse
• Une seconde de toute beauté

Decadent Conservatism: Politics and Aesthetics in The Senate

The relationship between late-Victorian Decadence and Aestheticism and politics has long been vexed. This article explores the hitherto under-explored confluence of conservatism and avant-garde literature in the period by introducing The Senate, a Tory-Decadent journal that ran from 1894-7. While Decadent authors occupied various political positions, this article argues that The Senate offers a crucial link between conservatism and Decadence The article presents the journal in its political and publishing context, outlining its editorial position on such issues as the Liberal Unionist-Conservative coalition governments, Britain's relationship with Europe and the threat of ‘State Socialism’, as well as its valorisation of Bollingbroke and eighteenth-century Toryism, and its relationship to, and difference from, key Decadent journals the Yellow Book and The Savoy. It then goes on to articulate its relationship to Decadence by focussing on the presence of Paul Verlaine in its pages and its vitriolic response to the press coverage of Oscar Wilde's trials. The article concludes by exploring the surprising wake of The Senate, briefly tracing the editors' influence in the development of Modernism and links with the journal BLAST.

Governing Public Health: EU Law, Regulation and Biopolitics

This book contributes towards EU studies and the growing discourse on law and public health. It uses the EU’s governance of public health as a lens through which to explore questions of legal competence and its development through policy and concrete techniques, processes and practices, risk and security, human rights and bioethics, accountability and legitimacy, democracy and citizenship, and the nature, essence and ‘future trajectory’ of the European integration project. These issues are explored first, by situating the EU's public health strategy within the overarching architecture of governance and subsequently by examining its operationalisation in relation to the key public health problems of cancer, HIV/AIDS and pandemic planning.

The book argues that the centrality and valorisation of scientific and technical knowledge and expertise in the EU's risk-based governance means that citizen participation in decision-making is largely marginalised and underdeveloped – and that this must change if public health and the quality, accountability and legitimacy of EU governance and its regulation are to be improved. Subsequently the book goes on to argue that the legitimating discourses of ethics and human rights, and the developing notion of EU (supra-)stewardship responsibility, can help to highlight the normative dimensions of governance and its interventions in public health. These discourses and dimensions provide openings and possibilities for citizens to power ‘technologies of participation’ and contribute important supplementary knowledge to decision-making.

The Role of Water Content and Paste Proportion on Physico-mechanical Properties of Alkali Activated Fly Ash–Ggbs Concrete

The growth of the construction industry worldwide poses a serious concern on the sustainability of the building material production chain, mainly due to the carbon emissions related to the production of Portland cement. On the other hand, valuable materials from waste streams, particularly from the metallurgical industry, are not used at their full potential. Alkali activated concrete (AAC) has emerged in the last years as a promising alternative to traditional Portland cement based concrete for some applications. However, despite showing remarkable strength and durability potential, its utilisation is not widespread, mainly due to the lack of broadly accepted standards for the selection of suitable mix recipes fulfilling design requirements, in particular workability, setting time and strength. In this paper, a contribution towards the design development of AAC synthetized from pulverised fuel ash (60%) and ground granulated blast furnace slag (40%) activated with a solution of sodium hydroxide and sodium silicate is proposed. Results from a first batch of mixes indicated that water content influences the setting time and that paste content is a key parameter for controlling strength development and workability. The investigation indicated that, for the given raw materials and activator compositions, a minimum water to solid (w/s) ratio of 0.37 was needed for an initial setting time of about 1 hour. Further work with paste content in the range of 30% to 33% determined the relationship between workability and strength development and w/s ratio and paste content. Strengths in the range of 50 - 60 MPa were achieved.