A finite element solution scheme for an elastic–viscoplastic soil model

A Newton–Raphson solution scheme with a stress point algorithm is presented for the implementation of an elastic–viscoplastic soilmodel in a finite element program. Viscoplastic strain rates are calculated using the stress and volumetric states of the soil. Sub-incrementsof time are defined for each iterative calculation of elastic–viscoplastic stress changes so that their sum adds up to the time incrementfor the load step. This carefully defined ‘iterative time’ ensures that the correct amount of viscoplastic straining is accumulated overthe applied load step. The algorithms and assumptions required to implement the solution scheme are provided. Verification of the solutionscheme is achieved by using it to analyze typical boundary value problems.

Antimicrobial prescribing in Nursing Homes in Northern Ireland: Results of Two Point-Prevalence Surveys

BACKGROUND: In 2005, the European Commission recommended that all member states should establish or strengthen surveillance systems for monitoring the use of antimicrobial agents. There is no evidence in the literature of any surveillance studies having been specifically conducted in nursing homes (NHs) in Northern Ireland (NI).

OBJECTIVE: The aim of this study was to determine the prevalence of antimicrobial prescribing and its relationship with certain factors (e.g. indwelling urinary catheterization, urinary incontinence, disorientation, etc.) in NH residents in NI.

METHODS: This project was carried out in NI as part of a wider European study under the protocols of the European Surveillance of Antimicrobial Consumption group. Two point-prevalence surveys (PPSs) were conducted in 30 NHs in April and November 2009. Data were obtained from nursing notes, medication administration records and staff in relation to antimicrobial prescribing, facility and resident characteristics and were analysed descriptively.

RESULTS: The point prevalence of antimicrobial prescribing was 13.2% in April 2009 and 10.7% in November 2009, with a 10-fold difference existing between the NHs with the highest and lowest antimicrobial prescribing prevalence during both PPSs. The same NH had the highest rate of antimicrobial prescribing during both April (30.6%) and November (26.0%). The group of antimicrobials most commonly prescribed was the penicillins (April 28.6%, November 27.5%) whilst the most prevalent individual antimicrobial prescribed was trimethoprim (April 21.3%, November 24.3%). The majority of antimicrobials were prescribed for the purpose of preventing urinary tract infections (UTIs) in both April (37.8%) and in November (46.7%), with 5% of all participating residents being prescribed an antimicrobial for this reason. Some (20%) antimicrobials were prescribed at inappropriate doses, particularly those which were used for the purpose of preventing UTIs. Indwelling urinary catheterization and wounds were significant risk factors for antimicrobial use in April [odds ratio {OR} (95% CI) 2.0 (1.1, 3.5) and 1.8 (1.1, 3.0), respectively] but not in November 2009 [OR (95% CI) 1.6 (0.8, 3.2) and 1.2 (0.7, 2.2), respectively]. Other resident factors, e.g. disorientation, immobility and incontinence, were not associated with antimicrobial use. Furthermore, none of the NH characteristics investigated (e.g. number of beds, hospitalization episodes, number of general practitioners, etc.) were found to be associated with antimicrobial use in either April or November 2009.

CONCLUSIONS: This study has identified a high overall rate of antimicrobial use in NHs in NI, with variability evident both within and between homes. More research is needed to understand which factors influence antimicrobial use and to determine the appropriateness of antimicrobial prescribing in this population in general and more specifically in the management of recurrent UTIs.

Boundary conditions in the simplest model of linear and second harmonic magneto-optical effects

This paper is concerned with linear and nonlinear magneto- optical effects in multilayered magnetic systems when treated by the simplest phenomenological model that allows their response to be represented in terms of electric polarization, The problem is addressed by formulating a set of boundary conditions at infinitely thin interfaces, taking into account the existence of surface polarizations. Essential details are given that describe how the formalism of distributions (generalized functions) allows these conditions to be derived directly from the differential form of Maxwell's equations. Using the same formalism we show the origin of alternative boundary conditions that exist in the literature. The boundary value problem for the wave equation is formulated, with an emphasis on the analysis of second harmonic magneto-optical effects in ferromagnetically ordered multilayers. An associated problem of conventions in setting up relationships between the nonlinear surface polarization and the fundamental electric field at the interfaces separating anisotropic layers through surface susceptibility tensors is discussed. A problem of self- consistency of the model is highlighted, relating to the existence of resealing procedures connecting the different conventions. The linear approximation with respect to magnetization is pursued, allowing rotational anisotropy of magneto-optical effects to be easily analyzed owing to the invariance of the corresponding polar and axial tensors under ordinary point groups. Required representations of the tensors are given for the groups infinitym, 4mm, mm2, and 3m, With regard to centrosymmetric multilayers, nonlinear volume polarization is also considered. A concise expression is given for its magnetic part, governed by an axial fifth-rank susceptibility tensor being invariant under the Curie group infinityinfinitym.

Autosomal dominant retinitis pigmentosa:a new multi-allelic marker (D3S621) genetically linked to the disease locus (RP4)

We report the characterization of a new eight-allele microsatellite (D3S621) isolated from a human chromosome 3 library. Two-point and multi-locus genetic linkage analysis have shown D3S621 to co-segregate with the previously mapped RP4 (theta m = 0.12, Zm = 4.34) and with other genetic markers on the long arm of the chromosome, including D3S14 (R208) (theta m = 0.00, Zm = 15.10), D3S47 (C17) (theta m = 0.11, Zm = 4.95), Rho (theta m = 0.07, Zm = 1.37), D3S21 (L182) (theta m = 0.07, Zm = 2.40) and D3S19 (U1) (theta m = 0.13, Zm = 2.78). This highly informative marker, with a polymorphic information content of 0.78, should be of considerable value in the extension of linkage data for autosomal dominant retinitis pigmentosa with respect to locii on the long arm of chromosome 3.

Coupled consolidation of a solid, infinite cylinder using a Terzaghi formulation

Axisymmetric consolidation is a classical boundary value problem for geotechnical engineers. Under some circumstances an analysis in which the changes in pore pressure, effective stress and displacement can be uncoupled from each other is sufficient, leading to a Terzaghi formulation of the axisymmetric consolidation equation in terms of the pore pressure. However, representation of the Mandel-Cryer effect usually requires more complex, coupled, Biot formulations. A new coupled formulation for the plane strain, axisymmetric consolidation problem is presented for small, linear elastic deformations. A single, easily evaluated parameter couples changes in pore pressure to changes in effective stress, and the resulting differential equation for pore pressure dissipation is very similar to Terzaghi’s classic formulation. The governing equations are then solved using finite differences and the consolidation of a solid infinite cylinder analysed, calculating the variation with time and with radius of the excess pore pressure and the radial displacement. Comparison with a previously published semi-analytical solution indicates that the formulation successfully embodies the Mandel-Cryer effect.

An improved TLBO with elite strategy for parameters identification of PEM fuel cell and solar cell models

Clean and renewable energy generation and supply has drawn much attention worldwide in recent years, the proton exchange membrane (PEM) fuel cells and solar cells are among the most popular technologies. Accurately modeling the PEM fuel cells as well as solar cells is critical in their applications, and this involves the identification and optimization of model parameters. This is however challenging due to the highly nonlinear and complex nature of the models. In particular for PEM fuel cells, the model has to be optimized under different operation conditions, thus making the solution space extremely complex. In this paper, an improved and simplified teaching-learning based optimization algorithm (STLBO) is proposed to identify and optimize parameters for these two types of cell models. This is achieved by introducing an elite strategy to improve the quality of population and a local search is employed to further enhance the performance of the global best solution. To improve the diversity of the local search a chaotic map is also introduced. Compared with the basic TLBO, the structure of the proposed algorithm is much simplified and the searching ability is significantly enhanced. The performance of the proposed STLBO is firstly tested and verified on two low dimension decomposable problems and twelve large scale benchmark functions, then on the parameter identification of PEM fuel cell as well as solar cell models. Intensive experimental simulations show that the proposed STLBO exhibits excellent performance in terms of the accuracy and speed, in comparison with those reported in the literature.

Epidermolysis bullosa:evidence for linkage to genetic markers on chromosome 1 in a family with the autosomal dominant simplex form

DNA from members of a three-generation pedigree of Irish origin, displaying an autosomal dominant simplex form of epidermolysis bullosa of the epidermolytic, simplex, or Koebner variety (EBS2), was analyzed for linkage with a set of markers derived from the long arm of chromosome 1. Two-point analysis revealed positive lod scores for five of these markers, AT3 (Z = 2.107, theta = 0), APOA2 (Z = 1.939, theta = 0.15), D1S66 (Z = 1.204, theta = 0), D1S13 (Z = 1.026, theta = 0.15), and D1S65 (Z = 0.329, theta = 0.15). Multilocus analysis, incorporating the markers D1S19, D1S16, D1S13, APOA2, D1S66, AT3, and D1S65, resulted in a lod score of 3 maximizing at AT3. These data strongly support previous tentative indications of linkage between EBS2 and genetic markers on the long arm of chromosome 1.