Early Implementation of Building Information Modeling into a Cold-Formed Steel Company: Providing Novel Project Management Techniques and Solutions to Industry

The ability of building information modeling (BIM) to positively impact projects in the AEC through greater collaboration and integration is widely acknowledged. This paper aims to examine the development of BIM and how it can contribute to the cold-formed steel (CFS) building industry. This is achieved through the adoption of a qualitative methodology encompassing a literature review, exploratory interviews with industry experts, culminating in the development of e-learning material for the sector. In doing so, the research team have collaborated with one of the United Kingdom’s largest cold-formed steel designer/fabricators. By demonstrating the capabilities of BIM software and providing technical and informative videos in its creation, this project has found two key outcomes. Firstly, to provide invaluable assistance in the transition from traditional processes to a fully collaborative 3D BIM as required by the UK Government under the “Government Construction Strategy” by 2016 in all public sector projects. Secondly, to demonstrate BIM’s potential not only within CFS companies, but also within the AEC sector as a whole. As the flexibility, adaptability and interoperability of BIM software is alluded to, the results indicate that the introduction and development of BIM and the underlying ethos suggests that it is a key tool in the development of the industry as a whole.

Family caregivers' ideal expectations of Canada's Compassionate Care Benefit

We present the findings of 57 interviews conducted in 2007-2008 with Canadians who have cared for a dying family member to examine their ideal expectations of the Compassionate Care Benefit (CCB) - a social programme providing job security and income support for workers caring for a dying person. Our aims are to (1) appreciate how intended users and other family caregivers view the programme's very nature; (2) identify programme challenges and improvements that emerge from considering family caregivers' ideal expectations; and (3) contribute to a larger evaluative study designed to make policy-relevant recommendations for CCB improvement. Review of transcripts across three respondent groups reveals four categories of ideal expectations: (1) eligibility, (2) informational, (3) timing and (4) financial. Ideal expectations were typically derived from respondents' experiences of care-giving, their knowledge of the programme and, for some, of applying for and/or receiving the CCB. Findings reveal that there are gaps between respondents' ideal expectations and their experienced realities. Such gaps may lead to disappointment being experienced by those who believe they should be eligible for the programme but are not, or should be entitled to receive some form of support that is not presently available. This analysis plays an important role in identifying potential changes for the CCB that may better support family caregivers, in that the ideal expectations serve as a starting point for articulating desirable programme amendments. This analysis also has wider relevance. For jurisdictions looking to create new social programmes to support caregivers based upon labour policy strategies and legislation, this analysis identifies considerations that should be made at the outset of development. For jurisdictions that already have employment-based caregiver support programmes, this analysis demonstrates that programme challenges may not always be met through legislative changes alone but also through measures such as increasing awareness. © 2011 Blackwell Publishing Ltd.

Commentary on the Humble Remonstrance of the Company of Stationers 1643

A petition from the Company of Stationers to Parliament to introduce some form of legislative regulation of the press. The petition is significant in revealing the extent to which the Stationers depended upon the state to support the regulation of the book trade, as well as the nature of the various public and private interest arguments upon which they sought to base their claim. The commentary articulates the various arguments presented by the Stationers within their petition. The benefits of the legal regulation they suggested concerned not only the censorship and suppression of seditious and heretical texts, but also facilitated the advancement of learning and knowledge and the flourishing of the printing industry itself. In addition, the petition presents the figure of the ‘author' as reliant upon the benefit of his work, and that the ‘production of the Brain' was to be regarded as equivalent to any other commodity or chattel.

Reterritorialising Canada: Arctic ice’s liquid modernity and the imagining of a Canadian archipelago

Studying mobile actor networks of moving people, objects, images, and discourses, in conjunction with changing time-spaces, offers a unique opportunity to understand important, and yet relatively neglected, “relational material” dynamics of mobility. A key example of this phenomenon is the recontinentalization of Canada amidst dramatically changing articulations of the meanings and boundaries of the Canadian land-ice- ocean mass. A notable reason why Canada is being re-articulated in current times is the extensiveness of Arctic thawing. The reconfiguration of space and “motility” options in the Arctic constitutes an example of how “materiality and sociality produce themselves together.” In this paper we examine the possibilities and risks connected to this recontinentalization of Canada’s North. In exploring the past, present, and immediate future of this setting, we advance the paradigmatic view that Canada’s changing Arctic is the key element in a process of transformation of Canada into a peninsular body encompassed within a larger archipelagic entity: a place more intimately attuned to its immense (and growing) coastal and insular routes.

Canada's Compassionate Care Benefit:Is it an adequate public health response to addressing the issue of caregiver burden in end-of-life care?

Background: An increasingly significant public health issue in Canada, and elsewhere throughout the developed world, pertains to the provision of adequate palliative/end-of-life (P/EOL) care. Informal caregivers who take on the responsibility of providing P/EOL care often experience negative physical, mental, emotional, social and economic consequences. In this article, we specifically examine how Canada's Compassionate Care Benefit (CCB) - a contributory benefits social program aimed at informal P/EOL caregivers - operates as a public health response in sustaining informal caregivers providing P/EOL care, and whether or not it adequately addresses known aspects of caregiver burden that are addressed within the population health promotion (PHP) model. Methods. As part of a national evaluation of Canada's Compassionate Care Benefit, 57 telephone interviews were conducted with Canadian informal P/EOL caregivers in 5 different provinces, pertaining to the strengths and weaknesses of the CCB and the general caregiving experience. Interview data was coded with Nvivo software and emerging themes were identified by the research team, with such findings published elsewhere. The purpose of the present analysis was identified after comparing the findings to the literature specific to caregiver burden and public health, after which data was analyzed using the PHP model as a guiding framework. Results: Informal caregivers spoke to several of the determinants of health outlined in the PHP model that are implicated in their burden experience: gender, income and social status, working conditions, health and social services, social support network, and personal health practises and coping strategies. They recognized the need for improving the CCB to better address these determinants. Conclusions: This study, from the perspective of family caregivers, demonstrates that the CCB is not living up to its full potential in sustaining informal P/EOL caregivers. Effort is required to transform the CCB so that it may fulfill the potential it holds for serving as one public health response to caregiver burden that forms part of a healthy public policy that addresses the determinants of this burden. © 2011 Williams et al; licensee BioMed Central Ltd.

Low cycle fatigue properties of CLAM steel at room temperature

The low cycle fatigue (LCF) properties and the fracture behavior of China Low Activation Martensitic (CLAM) steel have been studied over a range of total strain amplitudes from 0.2 to 2.0%. The specimens were cycled using tension-compression loading under total strain amplitude control. The CLAM steel displayed initial hardening followed by continuous softening to failure at room temperature in air. The relationship between strain and fatigue life was predicted using the parameters obtained from fatigue test. The factors effecting on low cycle fatigue of CLAM steel consisted of initial state of matrix dislocation arrangement, magnitude of cyclic stress, magnitude of total strain amplitude and microstructure. The potential mechanisms controlling the stress response, cyclic strain resistance and low cycle fatigue life have been evaluated.

Corrosion resistance of self-growing TiC coating on SIMP steel in LBE at 600 °C

SIMP steel was newly developed as a candidate structural material for the accelerator driven subcritical system. The serious decarburization of SIMP steel because of the high Si content was used to successfully form a self-growing TiC coating on the surface, after the Ti deposition as a first step. This TiC layer can effectively protect the surface from the static liquid lead-bismuth eutectic (LBE) corrosion at 600 °C up to 2000 h in the low oxygen LBE. However, in the oxygen saturated LBE, the TiC coating is oxidized into porous TiO2 after only 500 h and fails to protect. Therefore, the self-growing TiC coating is desired only when the oxygen content of LBE is strictly controlled on a low level.

Identifying early signs of aggression: psychometric properties of the cardiff infant contentiousness scale

Our aim was to develop an age-appropriate measure of early manifestations of aggression. We constructed a questionnaire about normative developmental milestones into which a set of items measuring infants’ use of physical force against people and expressed anger were included. These items comprise the Cardiff Infant Contentiousness Scale (CICS). Evidence for the reliability and validity of the CICS is provided from analyses of a sample of N5310 British infants, assessed at a mean age of 6 months as part of a larger longitudinal study of the development of aggression. The informants’ CICS ratings demonstrated reasonable levels of internal consistency and interrater agreement. Informants’ ratings were validated by observations of infants’ distress in response to restraint in a car seat. Longitudinal analyses revealed that contentiousness was stable over time and that contentiousness at 6 months predicted infants’ later use of force with peers. When used in the company of other methods, the simple four-item CICS scale could serve as a useful screen for early manifestations of aggressiveness in human infants.

Constitutive modeling, microstructure evolution, and processing map for a nitride-strengthened heat-resistant steel

A constitutive equation was established to describe the deformation behavior of a nitride-strengthened (NS) steel through isothermal compression simulation test. All the parameters in the constitutive equation including the constant and the activation energy were precisely calculated for the NS steel. The result also showed that from the stress-strain curves, there existed two different linear relationships between critical stress and critical strain in the NS steel due to the augmentation of auxiliary softening effect of the dynamic strain-induced transformation. In the calculation of processing maps, with the change of Zener-Hollomon value, three domains of different levels of workability were found, namely excellent workability region with equiaxed-grain microstructure, good workability region with “stripe” microstructure, and the poor workability region with martensitic-ferritic blend microstructure. With the increase of strain, the poor workability region first expanded, then shrank to barely existing, but appeared again at the strain of 0.6.

Oxygen Reduction Reaction on Metal-Terminated MnCr2O4 Nano-octahedron Catalyzing MnS Dissolution in an Austenitic Stainless Steel

To understand pitting corrosion in stainless steel is very important, and a recent work showed that the MnS dissolution catalyzed by MnCr2O4{111} is a starting point of pit g. This demonstrates the need to understand the oxygen reduction reaction (ORR) on MnCr2O4{111}, which is the other half-reaction to complete pitting corrosion. In this study, the adsorption behaviors of all oxygen-containing species on MnCr2O4{111}, which has several possible terminations, are explored via density functional theory calculations. It is found that O-2 adsorbs on MnCr2O4{111) surfaces very strongly. Many possible reactions are investigated and the favored reaction mechanism of ORR is determined. The interactions between O-2 and H2O on the two metal-terminated MriCr(2)O(4){111} are found to be different according to the atomic configurations of the two surfaces. All the calculated results suggest that ORR can readily occur on the MnCr2O4{111} surfaces.

What counts and what is being counted – The social organization of knowledge on the front lines of emergency medical services.

Paramedics are trained to use specialized medical knowledge and a variety of medical procedures and pharmaceutical interventions to “save patients and prevent further damage” in emergency situations, both as members of “health-care teams” in hospital emergency departments (Swanson, 2005: 96) and on the streets – unstandardized contexts “rife with chaotic, dangerous, and often uncontrollable elements” (Campeau, 2008: 3). The paramedic’s unique skill-set and ability to function in diverse situations have resulted in the occupation becoming ever more important to health care systems (Alberta Health and Wellness, 2008: 12).
Today, prehospital emergency services, while varying, exist in every major city and many rural areas throughout North America (Paramedics Association of Canada, 2008) and other countries around the world (Roudsari et al., 2007). Services in North America, for instance, treat and/or transport 2 million Canadians (over 250,000 in Alberta alone ) and between 25 and 30 million Americans annually (Emergency Medical Services Chiefs of Canada, 2006; National EMS Research Agenda, 2001). In Canada, paramedics make up one of the largest groups of health care professionals, with numbers exceeding 20,000 (Pike and Gibbons, 2008; Paramedics Association of Canada, 2008). However, there is little known about the work practices of paramedics, especially in light of recent changes to how their work is organized, making the profession “rich with unexplored opportunities for research on the full range of paramedic work” (Campeau, 2008: 2).

This presentation reports on findings from an institutional ethnography that explored the work of paramedics and different technologies of knowledge and governance that intersect with and organize their work practices. More specifically, my tentative focus of this presentation is on discussing some of the ruling discourses central to many of the technologies used on the front lines of EMS in Alberta and the consequences of such governance practices for both the front line workers and their patients. In doing so, I will demonstrate how IE can be used to answer Rankin and Campbell’s (2006) call for additional research into “the social organization of information in health care and attention to the (often unintended) ways ‘such textual products may accomplish…ruling purposes but otherwise fail people and, moreover, obscure that failure’ (p. 182)” (cited in McCoy, 2008: 709).