Influence of Manufacturing Tolerance on Aircraft Direct Operating Cost (DOC)

The influence of manufacturing tolerance on direct operating cost (DOC) is extrapolated from an engine nacelle to be representative of an entire aircraft body. Initial manufacturing tolerance data was obtained from the shop floor at Bombardier Aerospace Shorts, Belfast while the corresponding costs were calculated according to various recurring elements such as basic labour and overtime labour, rework, concessions, and redeployment; along with the non-recurrent costs due to tooling and machinery, etc. The relation of tolerance to cost was modelled statistically so that the cost impact of tolerance change could be ascertained. It was shown that a relatively small relaxation in the assembly and fabrication tolerances of the wetted surfaces resulted in reduced costs of production that lowered aircraft DOC, as the incurred drag penalty was predicted and taken into account during the optimisation process.

Seen but never heard: rethinking approaches to researching racism and young children

This paper is concerned with the methodology underlying attempts to understand the nature and impact of racism among young children. In drawing upon data gathered from a year-long ethnographic study of five- and six-year-old children in an English multi-ethnic, inner-city primary school, the paper provides a critique of traditional approaches to the study of racial attitudes among young children. It is argued that such research has been conceived through the articulation of two, inter-related discourses on children and on 'race'; the former couched in traditional socialisation and developmental models of childhood with their tendency to neglect the agency and social competency of young children and the latter being embedded within essentialist notions of 'race' and ethnicity that tend to deny the contingent and context-specific nature of racialised identities. The paper argues that the result of this has been that while children have often been the objects of research they have rarely been the subjects; in other words they are often seen but never heard. The paper argues for the need to move beyond the methodological confines set by these discourses and rethink alternative approaches that begin with the assumption that young children are socially competent. One such approach, drawing upon ethnographic methods and fore-grounding the importance of largely unstructured small group interviews with young children, is illustrated. Through the use of a number of examples, it is shown how this approach can help to emphasise the ability of children as young as five and six to respond to and negotiate their social worlds and more specifically within this the competency with which they are able to appropriate, rework and reproduce a number of discourses on 'race' to make sense of their own social experiences. In doing this the paper also illustrates the way in which it provides a methodology able to draw out and highlight the contradictions, contingency and complexity of racialised identities among young children. Ultimately, it is an approach concerned with placing the children themselves central within the research processes and foregrounding their voices and experiences.

Using Mesh-Geometry Relationships to Transfer Analysis Models between CAE Tools

Integrating analysis and design models is a complex task due to differences between the models and the architectures of the toolsets used to create them. This complexity is increased with the use of many different tools for specific tasks during an analysis process. In this work various design and analysis models are linked throughout the design lifecycle, allowing them to be moved between packages in a way not currently available. Three technologies named Cellular Modeling, Virtual Topology and Equivalencing are combined to demonstrate how different finite element meshes generated on abstract analysis geometries can be linked to their original geometry. Establishing the equivalence relationships between models enables analysts to utilize multiple packages for specialist tasks without worrying about compatibility issues or rework.

A Sensitivity Approach for Eliminating Clashes from Computer Aided Design Model Assemblies

Clashes occur when components in an assembly unintentionally violate others. If clashes are not identified and designed out before manufacture, product function will be reduced or substantial cost will be incurred in rework. This paper introduces a novel approach for eliminating clashes by identifying which parameters defining the part features in a computer aided design (CAD) assembly need to change and by how much. Sensitivities are calculated for each parameter defining the part and the assembly as the change in clash volume due to a change in each parameter value. These sensitivities give an indication of important parameters and are used to predict the optimum combination of changes in each parameter to eliminate the clash. Consideration is given to the fact that it is sometimes preferable to modify some components in an assembly rather than others and that some components in an assembly cannot be modified as the designer does not have control over their shape. Successful elimination of clashes has been demonstrated in a number of example assemblies.

Using mesh-geometry relationships to transfer analysis models between CAE tools

Integrating analysis and design models is a complex task due to differences between the models and the architectures of the toolsets used to create them. This complexity is increased with the use of many different tools for specific tasks using an analysis process. In this work various design and analysis models are linked throughout the design lifecycle, allowing them to be moved between packages in a way not currently available. Three technologies named Cellular Modeling, Virtual Topology and Equivalencing are combined to demonstrate how different finite element meshes generated on abstract analysis geometries can be linked to their original geometry. Cellular models allow interfaces between adjacent cells to be extracted and exploited to transfer analysis attributes such as mesh associativity or boundary conditions between equivalent model representations. Virtual Topology descriptions used for geometry clean-up operations are explicitly stored so they can be reused by downstream applications. Establishing the equivalence relationships between models enables analysts to utilize multiple packages for specialist tasks without worrying about compatibility issues or substantial rework.

Interface management for automating finite element analysis workflows

This paper outlines the importance of robust interface management for facilitating finite element analysis workflows. Topological equivalences between analysis model representations are identified and maintained in an editable and accessible manner. The model and its interfaces are automatically represented using an analysis-specific cellular decomposition of the design space. Rework of boundary conditions following changes to the design geometry or the analysis idealization can be minimized by tracking interface dependencies. Utilizing this information with the Simulation Intent specified by an analyst, automated decisions can be made to process the interface information required to rebuild analysis models. Through this work automated boundary condition application is realized within multi-component, multi-resolution and multi-fidelity analysis workflows.

After the Critique of Rights: For a Radical Democratic Theory and Practice of Human Rights

The critique of human rights has proliferated in critical legal thinking over recent years, making it clear that we can no longer uncritically approach human rights in their liberal form. In this article I assert that after the critique of rights one way human rights may be productively re-engaged in radical politics is by drawing from the radical democratic tradition. Radical democratic thought provides plausible resources to rework the shortcomings of liberal human rights, and allows human rights to be brought within the purview of a wider political project adopting a critical approach to current relations of power. Building upon previous re-engagements with rights using radical democratic thought, I return to the work of Ernesto Laclau and Chantal Mouffe to explore how human rights may be thought as an antagonistic hegemonic activity within a critical relation to power, a concept which is fundamentally futural, and may emerge as one site for work towards radical and plural democracy. I also assert, via Judith Butler's model of cultural translation, that a radical democratic practice of human rights may be advanced which resonates with and builds upon already existing activism, thereby holding possibilities to persuade those who remain sceptical as to radical re-engagements with rights.