Fast Response Exhaust Gas Temperature Measurement in IC Engines

The harsh environment presented by engines, particularly in the exhaust systems, often necessitates the use of robust and therefore low bandwidth temperature sensors. Consequently, high frequencies are attenuated in the output. One technique for addressing this problem involves measuring the gas temperature using two sensors with different time-constants and mathematically reconstructing the true gas temperature from the resulting signals. Such a technique has been applied in gas turbine, rocket motor and combustion research. A new reconstruction technique based on difference equations has been developed and its effectiveness proven theoretically. The algorithms have been successfully tested and proven on experimental data from a rig that produces cyclic temperature variations. These tests highlighted that the separation of the thermocouple junctions must be very small to ensure that both sensors are subjected to the same gas temperatures. Exhaust gas temperatures were recorded by an array of thermocouples during transient operation of a high performance two-stroke engine. The results show that the increase in bandwidth arising from the dual sensor technique allowed accurate measurement of exhaust gas temperature with relatively robust thermocouples. Finally, an array of very fine thermocouples (12.5 - 50 microns) was used to measure the in-cycle temperature variation in the exhaust.

Choose Life not Economic Growth: Critical Social Theory for People, Planet and Flourishing in the ‘Age of Nature’

Choose a fucking big television Choose washing machines, cars, compact disc players, and electrical tin openers... Choose leisure wear and matching luggage. Choose a three piece suite on hire purchase in a range of fucking fabrics. Choose DIY and wondering who you are on a Sunday morning. Choose sitting on that couch watching mind-numbing sprit-crushing game shows Stuffing fucking junk food into your mouth. Choose your future. Choose life. (Irvine Welsh, Trainspotting, 1996) Anyone who believes exponential growth can go on forever in a finite world is either a madman or an economist (Kenneth Boulding)

Project Omnivore: A Variable Compression Ratio ATAC 2-Stroke Engine for Ultra-Wide-Range HCCI Operation on a Variety of Fuels

The paper describes the principal features of Omnivore, a spark-ignition-based research engine designed to investigate the possibility of true wide-range HCCI operation on a variety of fossil and renewable liquid fuels. The engine project is part-funded jointly by the United Kingdom's Department for the Environment, Food and Rural Affairs (DEFRA) and the Department of the Environment of Northern Ireland (DoENI). The engineering team includes Lotus Engineering, Jaguar Cars, Orbital Corporation and Queen's University Belfast.

HTS Machines as Enabling Technology for All-Electric Airborne Vehicles

Environmental protection has now become paramount as evidence mounts to support the thesis of human activity-driven global warming. A global reduction of the emissions of pollutants into the atmosphere is therefore needed and new technologies have to be considered. A large part of the emissions come from transportation vehicles, including cars, trucks and airplanes, due to the nature of their combustion-based propulsion systems. Our team has been working for several years on the development of high power density superconducting motors for aircraft propulsion and fuel cell based power systems for aircraft. This paper investigates the feasibility of all-electric aircraft based on currently available technology. Electric propulsion would require the development of high power density electric propulsion motors, generators, power management and distribution systems. The requirements in terms of weight and volume of these components cannot be achieved with conventional technologies; however, the use of superconductors associated with hydrogen-based power plants makes possible the design of a reasonably light power system and would therefore enable the development of all-electric aero-vehicles. A system sizing has been performed both for actuators and for primary propulsion. Many advantages would come from electrical propulsion such as better controllability of the propulsion, higher efficiency, higher availability and less maintenance needs. Superconducting machines may very well be the enabling technology for all-electric aircraft development.

Fault Diagnostics for Internal Combustion Engines – Current and Future Techniques

The adoption of each new level of automotive emissions legislation often requires the introduction of additional emissions reduction techniques or the development of existing emissions control systems. This, in turn, usually requires the implementation of new sensors and hardware which must subsequently be monitored by the on-board fault detection systems. The reliable detection and diagnosis of faults in these systems or sensors, which result in the tailpipe emissions rising above the progressively lower failure thresholds, provides enormous challenges for OBD engineers. This paper gives a review of the field of fault detection and diagnostics as used in the automotive industry. Previous work is discussed and particular emphasis is placed on the various strategies and techniques employed. Methodologies such as state estimation, parity equations and parameter estimation are explained with their application within a physical model diagnostic structure. The utilization of symptoms and residuals in the diagnostic process is also discussed. These traditional physical model based diagnostics are investigated in terms of their limitations. The requirements from the OBD legislation are also addressed. Additionally, novel diagnostic techniques, such as principal component analysis (PCA) are also presented as a potential method of achieving the monitoring requirements of current and future OBD legislation.

Women Speaking of National Security: The Case of Checkpoint Watch

The production of reports and the distribution of information have become integral to the operation of many non-governmental organizations. In this regard, the fact that the all-women organization of Checkpoint Watch publishes reports about the Israeli checkpoints in the occupied West Bank seems to comply with current trends. However, the reports—most of which are short repetitive descriptions of the banality and everydayness of the military checkpoints, counting the number of people and cars waiting, commenting on the manner in which the checks are performed and meticulously documenting what mostly amounts to minor incidents of humiliation and distress—do not seem to abide by any convention of reporting. This work analyzes the reporting praxis of the organization and claims that it should be understood as a form of activism in and of itself. Tracking the ways in which the reports address the Israeli public through the concept of parrhesia, the work suggests that this form of reporting enables the women activists to use their gendered marginality to make their way into the highly masculinized and militarized Israeli security discourse.

Technological Learning in Developing Countries

Technological learning refers to the learning processes involved in improving the productive capabilities of an enterprise, sector or economy to enable it to produce higher quality goods or services with increasing levels of efficiency. Approaches to the study of technological learning include case studies of particular countries, sectors and firms; measures of export sophistication; and composite indicators of innovation and competitiveness. The present review draws on these approaches to provide an overview of the policies and practices that have been successful in different regions (East-Asia and Latin America) ; contexts (import substitution and liberalization) ; sectors (pulp and paper, IT services, electronics and passenger cars); and firms (Embrear and Lenovo). While it is clear that there is strong complementarity between domestic technological capability and the ability to absorb foreign technology, there is no simple policy recipe which is appropriate for all times, industries or places. Technological learning builds on and is shaped by what is already known. It requires time, space and resources all of which are influenced by the wider domestic and international context. The current international context is challenging but countries and firms have to find ways of moving forward despite the limited strategy space.

A techno-economic evaluation of changing from conventional vehicles to range extended electric vehicles

Transportation accounts for 22% of greenhouse gas emissions in the UK, and increases to 25% in Northern Ireland. Surface transport carbon dioxide emissions, consisting of road and rail, are dominated by cars. Demand for mobility is rising rapidly and vehicle numbers are expected to more than double by 2050. Car manufacturers are working towards reducing their carbon footprint through improving fuel efficiency and controlling exhaust emissions. Fuel efficiency is now a key consideration of consumers purchasing a new vehicle. While measures have been taken to help to reduce pollutants, in the future, alternative technologies will have to be used in the transportation industry to achieve sustainability. There are currently many alternatives to the market leader, the internal combustion engine. These alternatives include hydrogen fuel cell vehicles and electric vehicles, a term which is widely used to cover battery electric vehicles, plug-in hybrid electric vehicles and extended-range electric vehicles. This study draws direct comparisons measuring the differing performance in terms of fuel consumption, carbon emissions and range of a typical family saloon car using different fuel types. These comparisons will then be analysed to see what effect switching from a conventionally fuelled vehicle to a range extended electric vehicle would have not only on the end user, but also the UK government.

Bringing sounds into use: Thinking of sounds as materials and a sketch of auditory affordances

We live in a richly structured auditory environment. From the sounds of cars charging towards us on the street to the sounds of music filling a dancehall, sounds like these are generally seen as being instances of things we hear but can also be understood as opportunities for action. In some circumstances, the sound of a car approaching towards us can provide critical information for the avoidance of harm. In the context of a concert venue, sociocultural practices like music can equally afford coordinated activities of movement, such as dancing or music making. Despite how evident the behavioral effects of sound are in our everyday experience, they have been sparsely accounted for within the field of psychology. Instead, most theories of auditory perception have been more concerned with understanding how sounds are passively processed and represented or how they convey information of world, neglecting how this information can be used for anything. Here, we argue against these previous rationalizations, suggesting instead that information is instantiated through use and, therefore, is an emergent effect of a perceiver’s interaction with their environment. Drawing on theory from psychology, philosophy and anthropology, we contend that by thinking of sounds as materials, theorists and researchers alike can get to grips with the vast array of auditory affordances that we purposefully bring into use when interacting with the environment.

Identification of Road Irregularities via Vehicle Accelerations

A periodic monitoring of the pavement condition facilitates a cost-effective distribution of the resources available for maintenance of the road infrastructure network. The task can be accurately carried out using profilometers, but such an approach is generally expensive. This paper presents a method to collect information on the road profile via accelerometers mounted in a fleet of non-specialist vehicles, such as police cars, that are in use for other purposes. It proposes an optimisation algorithm, based on Cross Entropy theory, to predict road irregularities. The Cross Entropy algorithm estimates the height of the road irregularities from vehicle accelerations at each point in time. To test the algorithm, the crossing of a half-car roll model is simulated over a range of road profiles to obtain accelerations of the vehicle sprung and unsprung masses. Then, the simulated vehicle accelerations are used as input in an iterative procedure that searches for the best solution to the inverse problem of finding road irregularities. In each iteration, a sample of road profiles is generated and an objective function defined as the sum of squares of differences between the ‘measured’ and predicted accelerations is minimized until convergence is reached. The reconstructed profile is classified according to ISO and IRI recommendations and compared to its original class. Results demonstrate that the approach is feasible and that a good estimate of the short-wavelength features of the road profile can be detected, despite the variability between the vehicles used to collect the data.

A Conventional Internal Combustion Engine Versus a Range Extended Electric Vehicle Under the Current Regulatory Regime in the United Kingdom

Transport accounts for 22% of greenhouse gas emissions in the United Kingdom and cars are expected tomore than double by 2050. Car manufacturers are continually aiming for a substantially reduced carbonfootprint through improved fuel efficiency and better powertrain performance due to the strict EuropeanUnion emissions standards. However, road tax, not just fuel efficiency, is a key consideration of consumerswhen purchasing a car. While measures have been taken to reduce emissions through stricter standards, infuture, alternative technologies will be used. Electric vehicles, hybrid vehicles and range extended electricvehicles have been identified as some of these future technologies. In this research a virtual test bed of aconventional internal combustion engine and a range extended electric vehicle family saloon car were builtin AVL’s vehicle and powertrain system level simulation tool, CRUISE, to simulate the New EuropeanDrive Cycle and the results were then soft-linked to a techno-economic model to compare the effectivenessof current support mechanisms over the full life cycle of both cars. The key finding indicates that althoughcarbon emissions are substantially reduced, switching is still not financially the best option for either theconsumer or the government in the long run.

Dublin 1916: theatre of revolt

In his essay, Anti-Object, Kengo Kuma proposes that architecture cannot and should not be understood as object alone but instead always as series of networks and connections, relationships within space and through form. Some of these relationships are tangible, others are invisible. Stan Allen and James Corner have also called for an architecture that is more performative and operative – ‘less concerned with what buildings look like and more concerned with what they do’ – as means of effecting a more intimate and promiscuous relationship between infrastructure, urbanism and buildings. According to Allen this expanding filed offers a reclamation of some of the areas ceded by architecture following disciplinary specialization:

‘Territory, communication and speed are properly infrastructural problems and architecture as a discipline has developed specific technical means to deal with these variables. Mapping, projection, calculation, notation and visualization are among architecture’s traditional tools for operating at the very large scale’.

The motorway may not look like it – partly because we are no longer accustomed to think about it as such – but it is a site for and of architecture, a territory where architecture can be critical and active. If the limits of the discipline have narrowed, then one of the functions of a school of architecture must be an attempt occupy those areas of the built environment where architecture is no longer, or has yet to reach. If this is a project about reclamation of a landscape, it is also a challenge to some of the boundaries that surround architecture and often confine it, as Kuma suggests, to the appreciation of isolated objects.

M:NI 2014-15
We tend to think of the motorway as a thing or an object, something that has a singular function. Historically this is how it has been seen, with engineers designing bridges and embankments and suchlike with zeal … These objects like the M3 Urban Motorway, Belfast’s own Westway, are beautiful of course, but they have caused considerable damage to the city they were inflicted upon.

Actually, it’s the fact that we have seen the motorway as a solid object that has caused this problem. The motorway actually is a fluid and dynamic thing, and it should be seen as such: in fact it’s not an organ at all but actually tissue – something that connects rather than is. Once we start to see the motorway as tissue, it opens up new propositions about what the motorway is, is used for and does. This new dynamic and connective view unlocks the stasis of the motorway as edifice, and allows adaptation to happen: adaptation to old contexts that were ignored by the planners, and adaptation to new contexts that have arisen because of or in spite of our best efforts.

Motorways as tissue are more than just infrastructures: they are landscapes. These landscapes can be seen as surfaces on which flows take place, not only of cars, buses and lorries, but also of the globalized goods carried and the lifestyles and mobilities enabled. Here the infinite speed of urban change of thought transcends the declared speed limit [70 mph] of the motorway, in that a consignment of bananas can cause soil erosion in Equador, or the delivery of a new iphone can unlock connections and ideas the world over.

So what is this new landscape to be like? It may be a parallax-shifting, cognitive looking glass; a drone scape of energy transformation; a collective farm, or maybe part of a hospital. But what’s for sure, is that it is never fixed nor static: it pulses like a heartbeat through that most bland of landscapes, the countryside. It transmits forces like a Caribbean hurricane creating surf on an Atlantic Storm Beach: alien forces that mutate and re-form these places screaming into new, unclear and unintended futures.

And this future is clear: the future is urban. In this small rural country, motorways as tissue have made the whole of it: countryside, mountain, sea and town, into one singular, homogenous and hyper-connected, generic city.

Goodbye, place. Hello, surface!

MNI: Motorway Notation Network

In his essay, Anti-Object, Kengo Kuma proposes that architecture cannot and should not be understood as object alone but instead always as series of networks and connections, relationships within space and through form. Some of these relationships are tangible, others are invisible. Stan Allen and James Corner have also called for an architecture that is more performative and operative – ‘less concerned with what buildings look like and more concerned with what they do’ – as means of effecting a more intimate and promiscuous relationship between infrastructure, urbanism and buildings. According to Allen this expanding filed offers a reclamation of some of the areas ceded by architecture following disciplinary specialization:

‘Territory, communication and speed are properly infrastructural problems and architecture as a discipline has developed specific technical means to deal with these variables. Mapping, projection, calculation, notation and visualization are among architecture’s traditional tools for operating at the very large scale’.

The motorway may not look like it – partly because we are no longer accustomed to think about it as such – but it is a site for and of architecture, a territory where architecture can be critical and active. If the limits of the discipline have narrowed, then one of the functions of a school of architecture must be an attempt occupy those areas of the built environment where architecture is no longer, or has yet to reach. If this is a project about reclamation of a landscape, it is also a challenge to some of the boundaries that surround architecture and often confine it, as Kuma suggests, to the appreciation of isolated objects.

M:NI 2014-15
We tend to think of the motorway as a thing or an object, something that has a singular function. Historically this is how it has been seen, with engineers designing bridges and embankments and suchlike with zeal … These objects like the M3 Urban Motorway, Belfast’s own Westway, are beautiful of course, but they have caused considerable damage to the city they were inflicted upon.

Actually, it’s the fact that we have seen the motorway as a solid object that has caused this problem. The motorway actually is a fluid and dynamic thing, and it should be seen as such: in fact it’s not an organ at all but actually tissue – something that connects rather than is. Once we start to see the motorway as tissue, it opens up new propositions about what the motorway is, is used for and does. This new dynamic and connective view unlocks the stasis of the motorway as edifice, and allows adaptation to happen: adaptation to old contexts that were ignored by the planners, and adaptation to new contexts that have arisen because of or in spite of our best efforts.

Motorways as tissue are more than just infrastructures: they are landscapes. These landscapes can be seen as surfaces on which flows take place, not only of cars, buses and lorries, but also of the globalized goods carried and the lifestyles and mobilities enabled. Here the infinite speed of urban change of thought transcends the declared speed limit [70 mph] of the motorway, in that a consignment of bananas can cause soil erosion in Equador, or the delivery of a new iphone can unlock connections and ideas the world over.

So what is this new landscape to be like? It may be a parallax-shifting, cognitive looking glass; a drone scape of energy transformation; a collective farm, or maybe part of a hospital. But what’s for sure, is that it is never fixed nor static: it pulses like a heartbeat through that most bland of landscapes, the countryside. It transmits forces like a Caribbean hurricane creating surf on an Atlantic Storm Beach: alien forces that mutate and re-form these places screaming into new, unclear and unintended futures.

And this future is clear: the future is urban. In this small rural country, motorways as tissue have made the whole of it: countryside, mountain, sea and town, into one singular, homogenous and hyper-connected, generic city.

Goodbye, place. Hello, surface!