Influence of rheology on the quality of surface finish of cement-based mortars

Aesthetics of concrete structures is directly related to the quality of their surface finish. The objective of this investigation was to examine the effect of rheological properties of cement-based mortars on the quality of their surface finish. The study was divided into two phases. Firstly, the influence of the mix composition of mortars, viz. the water to cement (w/c) ratio, the sand content and the superplasticiser (SP) dosage on their rheology was evaluated. Secondly, the surface finish quality was characterised and related to the rheology of the studied systems. Rheology of these materials, i.e. the yield value, was measured using a vane viscometer. The quality of the surface finish was assessed by quantification of the surface air voids by analysing digital photographs of the mould finished sample surfaces. It was found that an increase in the w/c ratio and the SP content decreased the yield value, whilst the increase in the sand content had an opposite effect. When the surface quality is concerned, an increase in the yield value was found to increase the total content of the surface air voids and especially those with size smaller than 1 mm in diameter. Moreover, the analysis of the location of the surface air voids along the height of the sample revealed that with the increase in the yield value their concentration was higher in the bottom section of the analysed samples.

On the Ontological Quality and Logical Quality of Conceptual-Modeling Grammars: The Need for a Dual Perspective

A core activity in information systems development involves building a conceptual model of the domain that an information system is intended to support. Such models are created using a conceptual-modeling (CM) grammar. Just as high-quality conceptual models facilitate high-quality systems development, high-quality CM grammars facilitate high-quality conceptual modeling. This paper provides a new perspective on ways to improve the quality of the semantics of CM grammars. For many years, the leading approach to this topic has relied on ontological theory. We show, however, that the ontological approach captures only half the story. It needs to be coupled with a logical approach. We explain how the ontological quality and logical quality of CM grammars interrelate. Furthermore, we outline three contributions that a logical approach can make to evaluating the quality of CM grammars: a means of seeing some familiar conceptual-modeling problems in simpler ways; the illumination of new problems; and the ability to prove the benefit of modifying existing CM grammars in particular ways. We demonstrate these benefits in the context of the Entity-Relationship grammar. More generally, our paper opens up a new area of research with many opportunities for future research and practice.

Evaluation of the Q-method as a method of public participation in the selection of sustainable development indicators

The complexity of sustainable development means that it is often difficult to evaluate and communicate the concept effectively. One standard method to reduce complexity and improve Communication, while maintaining scientific objectivity, is to use selected indicators. The aim of this paper is to describe and evaluate a process Of public participation in the selection of sustainable development indicators that utilised the Q-method for discourse analysis. The Q-method was Utilised to combine public opinion with technical expertise to create a list of technically robust indicators that would be relevant to the public, The method comprises statement collection, statement analysis, Q-sorts and Q-sort analysis. The results of the Q-method generated a list of statements for which a preliminary list of indicators was then developed by a team of experts from the fields of environmental science, sustainable development and Psychology. Subsequently members of the public evaluated the preliminary list of indicators, to select a final list of indicators that were both technically sound and incorporated the views of the public. The Utilisation of the Q-method in this process was evaluated using previously published criteria. The application of the Q-method in this context needs to be considered not only by the quality of the indicators developed, but also from the perspective of the benefit of the process to the participants. it was concluded that the Q-method provided an effective framework for public participation in the selection of indicators as it allowed the public to discuss Sustainable development in familiar language and in the context of their daily lives. By combining this information with expert input, a list of technically robust indicators that resonate with the public was developed. The results demonstrated that many citizens are not aware Of Sustainable development, and if it is to be successfully communicated to them, then indicators and policy need to be couched in terms familiar and relevant to citizen and communities. (C) 2009 Elsevier Ltd. All rights reserved.

Determination of the heat transfer coefficient at the metal–die interface for high pressure die cast AlSi9Cu3Fe

When simulating the High Pressure Die Casting ‘HPDC’ process, the heat transfer coefficient ‘HTC’ between the casting and the die is critical to accurately predict the quality of the casting. To determine the HTC at the metal–die interface a production die for an automotive engine bearing beam, Die 1, was instrumented with type K thermocouples. A Magmasoft® simulation model was generated with virtual thermocouple points placed in the same location as the production die. The temperature traces from the simulation model were compared to the instrumentation results. Using the default simulation HTC for the metal–die interface, a poor correlation was seen, with the temperature response being much less for the simulation model. Because of this, the HTC at the metal–die interface was modified in order to get a better fit. After many simulation iterations, a good fit was established using a peak HTC of 42,000 W/m2 K, this modified HTC was further validated by a second instrumented production die, proving that the modified HTC gives good correlation to the instrumentation trials. The updated HTC properties for the simulation model will improve the predictive capabilities of the casting simulation software and better predict casting defects.

The influence of the new general ophthalmic services (GOS) contract in optometrist referrals for glaucoma in Scotland

Purpose: To assess the quality of referrals from community optometrists in the northeast of Scotland to the hospital glaucoma service before and after the implementation of the new General Ophthalmic Services (GOS) contract in Scotland. Methods: Retrospective study encompassing two 6-month periods, one before the implementation of the new GOS (Scotland) contract in April 2006 (from June to November 2005), and the other after (from June to November 2006). The community optometrist referral forms and hospital glaucoma service notes were reviewed. Comparisons were performed using the t-test and ?- test. Results: In all, 183 referrals were made during the first 6-month period from June to November 2005, and 120 referrals were made during the second 6-month period from June to November 2006. After the introduction of the new GOS contract, there was a statistically significant increase in true-positive referrals (from 18.0 to 31.7%; P=0.006), decrease in false-positive referrals (from 36.6 to 31.7%; P=0.006), and increase in the number of referrals with information on applanation tonometry (from 11.8 to 50.0%; P=0.000), dilated fundal examination (from 2.2 to 24.2%; P=0.000), and repeat visual fields (from 14.8 to 28.3%; P=0.004) when compared to the first 6-month period. However, only 41.7% of referrals fulfilled the new GOS contract requirements, with information on applanation tonometry the most commonly missing. Conclusions: After the implementation of the new GOS (Scotland) contract in April 2006, there has been an improvement in the quality of the glaucoma referrals from the community optometrists in the northeast of Scotland, with a corresponding reduction in false-positive referrals. Despite the relatively positive effect so far, there is still scope for further improvement. © 2009 Macmillan Publishers Limited All rights reserved.

An exploration of the relationship between social support and depressive symptoms in schizophrenia

Objective: Depressive symptoms in schizophrenia have previously been associated with a perceived lack of social support. The aim of this study was to explore the relationship between perceived social support and depressive symptoms in schizophrenia; to assess the psychological wellbeing of their carers; and to examine the quality of the relationship between the patients and their carers. Method: Individuals with schizophrenia (n = 17) were assessed on the Beck Depression Inventory (BDI), the Beck Hopelessness Scale (BHS), a measure of perceived social support, the Significant Others Scale (SOS) and the Quality of Relationship Inventory (QRI). Results: The mean score on the BDI for patients fell within the moderate-severe range and the mean range on the BHS fell within the moderate range. Family and friends were perceived as supportive resources by patients. There was no significant relationship between patient epressive symptoms or hopelessness and perceived social support. Carers of patients did not report high rates of depressive symptoms or hopelessness. Conclusions: These findings do not support the previous finding of an association between depressive symptoms and a perceived lack of social support in schizophrenia.

A methodological review of the Short Form Health Survey 36 (SF-36) and its derivatives among breast cancer survivors

Purpose: A systematic review of the validity, reliability and sensitivity of the Short Form (SF) health survey measures among breast cancer survivors.
Methods: We searched a number of databases for peer-reviewed papers. The methodological quality of the papers was assessed using the COnsenus-based Standards for the selection of health Measurement INstruments (COSMIN).
Results: The review identified seven papers that assessed the psychometric properties of the SF-36 (n = 5), partial SF-36 (n = 1) and SF-12 (n = 1) among breast cancer survivors. Internal consistency scores for the SF measures ranged from acceptable to good across a range of language and ethnic sub-groups. The SF-36 demonstrated good convergent validity with respective subscales of the Functional Assessment of Cancer Treatment—General scale and two lymphedema-specific measures. Divergent validity between the SF-36 and Lymph-ICF was modest. The SF-36 demonstrated good factor structure in the total breast cancer survivor study samples. However, the factor structure appeared to differ between specific language and ethnic sub-groups. The SF-36 discriminated between survivors who reported or did not report symptoms on the Breast Cancer Prevention Trial Symptom Checklist and SF-36 physical sub-scales, but not mental sub-scales, discriminated between survivors with or without lymphedema. Methodological quality scores varied between and within papers.
Conclusion: Short Form measures appear to provide a reliable and valid indication of general health status among breast cancer survivors though the limited data suggests that particular caution is required when interpreting scores provided by non-English language groups. Further research is required to test the sensitivity or responsiveness of the measure.

Bond quality of cross-laminated timber from Irish Sitka spruce

The potential use of Irish-grown Sitka spruce for cross-laminated timber (CLT) manufacture is investigated as this would present new opportunities and novel products for Irish timber in the home and export markets. CLT is a prefabricated multilayer engineered wood product made of at least three orthogonally bonded layers of timber. In order to increase rigidity and stability, successive layers of boards are placed cross-wise to form a solid timber panel. Load-bearing CLT wall and floor panels are easily assembled on site to form multi-storey buildings. This improves construction and project delivery time, reduces costs,
and maximises efficiency on all levels.

The paper addresses the quality of the interface bond between the laminations making up the panels, which is of fundamental importance to the load bearing capacity. Therefore, shear tests were carried out on nine test bars of three glue lines each. Moreover, delamination tests were performed on samples subjected to accelerated aging, in order to assess the durability of bonds subjected to severe environmental conditions. In addition, this paper gives an indication on thickness tolerances of planed Irish Sitka spruce lamellas, which is likely to be a critical factor for bonding quality and adhesive selection. The test results of bond quality presented in this study were within requirements of prEN 16351:2013.

Investigation of the temperature homogeneity of die melt flows in polymer extrusion

Polymer extrusion is fundamental to the processing of polymeric materials and melt flow temperature homogeneity is a major factor which influences product quality. Undesirable thermal conditions can cause problems such as melt degradation, dimensional instability, weaknesses in mechanical/optical/geometrical properties, and so forth. It has been revealed that melt temperature varies with time and with radial position across the die. However, the majority of polymer processes use only single-point techniques whose thermal measurements are limited to the single point at which they are fixed. Therefore, it is impossible for such techniques to determine thermal homogeneity across the melt flow. In this work, an extensive investigation was carried out into melt flow thermal behavior of the output of a single extruder with different polymers and screw geometries over a wide range of processing conditions. Melt temperature profiles of the process output were observed using a thermocouple mesh placed in the flow and results confirmed that the melt flow thermal behavior is different at different radial positions. The uniformity of temperature across the melt flow deteriorated considerably with increase in screw rotational speed while it was also shown to be dependent on process settings, screw geometry, and material properties. Moreover, it appears that the effects of the material, machine, and process settings on the quantity and quality of the process output are heavily coupled with each other and this may cause the process to be difficult to predict and variable in nature

The effect of changing the built environment on physical activity: a quantitative review of the risk of bias in natural experiments.

BACKGROUND:
Evidence regarding the association of the built environment with physical activity is influencing policy recommendations that advocate changing the built environment to increase population-level physical activity. However, to date there has been no rigorous appraisal of the quality of the evidence on the effects of changing the built environment. The aim of this review was to conduct a thorough quantitative appraisal of the risk of bias present in those natural experiments with the strongest experimental designs for assessing the causal effects of the built environment on physical activity.

METHODS:
Eligible studies had to evaluate the effects of changing the built environment on physical activity, include at least one measurement before and one measurement of physical activity after changes in the environment, and have at least one intervention site and non-intervention comparison site. Given the large number of systematic reviews in this area, studies were identified from three exemplar systematic reviews; these were published in the past five years and were selected to provide a range of different built environment interventions. The risk of bias in these studies was analysed using the Cochrane Risk of Bias Assessment Tool: for Non-Randomized Studies of Interventions (ACROBAT-NRSI).

RESULTS:
Twelve eligible natural experiments were identified. Risk of bias assessments were conducted for each physical activity outcome from all studies, resulting in a total of fifteen outcomes being analysed. Intervention sites included parks, urban greenways/trails, bicycle lanes, paths, vacant lots, and a senior citizen's centre. All outcomes had an overall critical (n = 12) or serious (n = 3) risk of bias. Domains with the highest risk of bias were confounding (due to inadequate control sites and poor control of confounding variables), measurement of outcomes, and selection of the reported result.

CONCLUSIONS:
The present review focused on the strongest natural experiments conducted to date. Given this, the failure of existing studies to adequately control for potential sources of bias highlights the need for more rigorous research to underpin policy recommendations for changing the built environment to increase physical activity. Suggestions are proposed for how future natural experiments in this area can be improved.

The validity of the MacNew Quality of Life Questionnaire in heart disease.

Background A previous review suggested that the MacNew Quality of Life Questionnaire was the most appropriate disease-specific measure of health-related quality of life among people with ischaemic heart disease. However, there is ambiguity about the allocation of items to the three factors underlying the MacNew and the factor structure has not been confirmed previously among the people in the UK. Methods The MacNew Questionnaire and the SF-36 were administered to 117 newly admitted patients to a tertiary referral centre in Northern Ireland. All patients had been diagnosed with ischaemic heart disease. Results A confirmatory factor analysis was conducted on the factor structure of the MacNew and the model was found to be an inadequate fit of the data. A quantitative and qualitative analysis of the items suggested that a five factor solution was more appropriate and this was validated by confirmatory factor analysis. This new structure also displayed strong evidence of concurrent validity when compared to the SF-36. Conclusion We recommend that researchers should submit scores obtained from items on the MacNew to secondary analyses after being grouped according to the factor structure proposed in this paper, in order to explore further the most appropriate grouping of items.