Boost your word power: Katherine Rogers and Maggie Bennett describe a tool that can help students prepare their life science assignments

Anatomy and physiology refers to the structure and function of the human body. Students studying this module, known as life science or bioscience, develop knowledge of the structure (anatomy) and function (physiology) of the body that can be applied in clinical practice and support other study courses.

Creative Activism: a pedagogical and research tool

Environmental activism has a long history in protest, addressing issues of degradation and segregation that threaten existing ecologies, social and built fabrics. Environmental activism is traditionally understood as a reaction, chiefly by groups of people, against a perceived external threat. In the 60’s and 70’s, an activist stance began to emerge in the work of some artists and architects, who used creative methods such as performances, happenings, temporary spatial interventions etc to convey their political/aesthetic messages. Some of this work engaged directly with communities but predominantly it was the production of one individual working ‘outside’ society. However such actions demonstrated not only the power of the visual in conveying a political message but also the potential of conceptual creative approaches to reveal alternative values and hidden potentials. This marked a shift from activism as protestation towards an activism of reconceptualisation. Recently, activist groups have developed a more politically informed process. Whilst their ‘tools’ may resemble work from the 60’s and 70’s , their methodologies are non-traditional, ’rhizomatic’, pedagogical and fluid; working alongside, rather than against, the established power and funding structures. Such creative processes build new, often unexpected, stakeholder networks; offer neutral spaces in which contentious issues can be faced; and create better understanding of values and identities. They can also lead to permanent improvements and development in the physical fabric. This paper will discuss a pedagogical example of activism in architectural education. The event (www.fourdaysontheoutside.com) is in its fifth year of existence and as such has revealed a value and impulse beyond its learning and teaching value. The paper will discuss how the event contributes to the university’s outreach programme and how its structure acts as a seedbed for potential research projects and partnerships. UK Universities talk extensively about applied research but have few actual strategies by which to generate it. Fourdaysontheoutside offers some potential ways forward.

Design and analysis of dual-rail circuits for security applications

Dual-rail encoding, return-to-spacer protocol, and hazard-free logic can be used to resist power analysis attacks by making energy consumed per clock cycle independent of processed data. Standard dual-rail logic uses a protocol with a single spacer, e.g., all-zeros, which gives rise to energy balancing problems. We address these problems by incorporating two spacers; the spacers alternate between adjacent clock cycles. This guarantees that all gates switch in every clock cycle regardless of the transmitted data values. To generate these dual-rail circuits, an automated tool has been developed. It is capable of converting synchronous netlists into dual-rail circuits and it is interfaced to industry CAD tools. Dual-rail and single-rail benchmarks based upon the advanced encryption standard (AES) have been simulated and compared in order to evaluate the method and the tool.

Product standardisation as a tool to control prescribing costs a case study of alginate liquid preparations

Introduction Product standardisation involves promoting the prescribing of pre-selected products within a particular category across a healthcare region and is designed to improve patient safety by promoting continuity of medicine use across the primary/secondary care interface, in addition to cost containment without compromising clinical care (i.e. maintaining safety and efficacy). Objectives To examine the impact of product standardisation on the prescribing of compound alginate preparations within primary care in Northern Ireland. Methods Data were obtained on alginate prescribing from the Northern Ireland Central Services Agency (Prescription Pricing Branch), covering a period of 43 months. Two standardisation promotion interventions were carried out at months 18 and 33. In addition to conventional statistical analyses, a simple interrupted time series analysis approach, using graphical interpretation, was used to facilitate interpretation of the data. Results There was a significant increase in the prescribed share of the preferred alginate product in each of the four health boards in Northern Ireland and a decrease in the cost per Defined Daily Dose for alginate liquid preparations overall. Compliance with the standardisation policy was, however, incomplete and was influenced to a marked degree by the activities of the pharmaceutical industry. The overall economic impact of the prescribing changes during the study was small (3.1%). Conclusion The findings suggested that product standardisation significantly influenced the prescribing pattern for compound alginate liquid preparations within primary care across Northern Ireland. © 2012 The Authors. IJPP © 2012 Royal Pharmaceutical Society.

Efficacy of Biocides Used in the Modern Food Industry To Control Salmonella enterica, and Links between Biocide Tolerance and Resistance to Clinically Relevant Antimicrobial Compounds

Biocides play an essential role in limiting the spread of infectious disease. The food industry is dependent on these agents, and their increasing use is a matter for concern. Specifically, the emergence of bacteria demonstrating increased tolerance to biocides, coupled with the potential for the development of a phenotype of cross-resistance to clinically important antimicrobial compounds, needs to be assessed. In this study, we investigated the tolerance of a collection of susceptible and multidrug-resistant (MDR) Salmonella enterica strains to a panel of seven commercially available food-grade biocide formulations. We explored their abilities to adapt to these formulations and their active biocidal agents, i.e., triclosan, chlorhexidine, hydrogen peroxide, and benzalkonium chloride, after sequential rounds of in vitro selection. Finally, cross-tolerance of different categories of biocidal formulations, their active agents, and the potential for coselection of resistance to clinically important antibiotics were investigated. Six of seven food-grade biocide formulations were bactericidal at their recommended working concentrations. All showed a reduced activity against both surface-dried and biofilm cultures. A stable phenotype of tolerance to biocide formulations could not be selected. Upon exposure of Salmonella strains to an active biocidal compound, a high-level of tolerance was selected for a number of Salmonella serotypes. No cross-tolerance to the different biocidal agents or food-grade biocide formulations was observed. Most tolerant isolates displayed changes in their patterns of susceptibility to antimicrobial compounds. Food industry biocides are effective against planktonic Salmonella. When exposed to sublethal concentrations of individual active biocidal agents, tolerant isolates may emerge. This emergence was associated with changes in antimicrobial susceptibilities.

Voltage Dip Benchmarking in Power Quality and Disturbance Monitoring

This paper examines power quality benchmarks in the electricity supply industry (ESI) and impact of standards for the reduction of voltage dip incidents. The paper considers adherence to particular standards and is supported by several case studies from incidents where voltage dips have been detected and assessed by the power systems division of Scottish Power and where improvements have been implemented to help militate against subsequent incidents.

Early Implementation of Building Information Modeling into a Cold-Formed Steel Company: Providing Novel Project Management Techniques and Solutions to Industry

The ability of building information modeling (BIM) to positively impact projects in the AEC through greater collaboration and integration is widely acknowledged. This paper aims to examine the development of BIM and how it can contribute to the cold-formed steel (CFS) building industry. This is achieved through the adoption of a qualitative methodology encompassing a literature review, exploratory interviews with industry experts, culminating in the development of e-learning material for the sector. In doing so, the research team have collaborated with one of the United Kingdom’s largest cold-formed steel designer/fabricators. By demonstrating the capabilities of BIM software and providing technical and informative videos in its creation, this project has found two key outcomes. Firstly, to provide invaluable assistance in the transition from traditional processes to a fully collaborative 3D BIM as required by the UK Government under the “Government Construction Strategy” by 2016 in all public sector projects. Secondly, to demonstrate BIM’s potential not only within CFS companies, but also within the AEC sector as a whole. As the flexibility, adaptability and interoperability of BIM software is alluded to, the results indicate that the introduction and development of BIM and the underlying ethos suggests that it is a key tool in the development of the industry as a whole.

Wear analysis and prediction of the life of a riveting die used in the automotive industry

Knowledge on the life span of the riveting dies used in the automotive industry is sparse. It is often the case that only when faulty products are produced are workers aware that their tool needs to be changed. This is of course costly both in terms of time and money. Responding to this challenge, this paper proposes a methodology which integrates wear and stress analysis to quantify the life of a riveting die. Experiments are carried out to measure the applied load required to split a rivet. The obtained results (i.e. force curves) are used to validate the wear mechanisms of the die observed using scanning electron microscopy. Sliding, impact, and adhesive wears are observed on the riveting die after a certain number of riveting cycles. The stress distribution on the die during riveting is simulated using a finite element (FE) approach. In order to confirm the accuracy of the FE model, the experimental force results are compared with the ones produced from FE simulation. The maximum and minimum von Mises' stresses generated from the FE model are input into a Goodman diagram and an S-N curve to compute the life of the riveting die. It is found that the riveting die is predicted to run for 4 980 000 cycles before failure.

The evolution of offshore wind power in the United Kingdom

In the United Kingdom wind power is recognised as the main source of renewable energy to achieve the European Union 2020 renewable energy targets. Currently over 50% of renewable power is generated from onshore wind with a large number of offshore wind projects in development. Recently the government has re-iterated its commitment to offshore wind power and has announced that offshore wind subsidies are to increase from £135/MWh to £140/MWh until 2019. This paper provides a detailed overview of the offshore wind power industry in the United Kingdom in terms of market growth, policy development and offshore wind farm costs. The paper clearly shows that the United Kingdom is the world leader for installed offshore wind power capacity as pro-active policies and procedures have made it the most attractive location to develop offshore wind farm arrays. The key finding is that the United Kingdom has the potential to continue to lead the world in offshore wind power as it has over 48 GW of offshore wind power projects at different stages of operation and development. The growth of offshore wind power in the United Kingdom has seen offshore wind farm costs rise and level off at approximately £3 million/MW, which are higher than onshore wind costs at £1.5–2 million/MW. Considering the recent increase in offshore wind power subsidies and plans for 48 GW of offshore wind power could see more offshore wind power becoming increasingly financially competitive with onshore wind power. Therefore offshore wind power is likely to become a significant source of electricity in the United Kingdom beyond 2020.

A review of ADP processing software

Data processing is an essential part of Acoustic Doppler Profiler (ADP) surveys, which have become the standard tool in assessing flow characteristics at tidal power development sites. In most cases, further processing beyond the capabilities of the manufacturer provided software tools is required. These additional tasks are often implemented by every user in mathematical toolboxes like MATLAB, Octave or Python. This requires the transfer of the data from one system to another and thus increases the possibility of errors. The application of dedicated tools for visualisation of flow or geographic data is also often beneficial and a wide range of tools are freely available, though again problems arise from the necessity of transferring the data. Furthermore, almost exclusively PCs are supported directly by the ADP manufacturers, whereas small computing solutions like tablet computers, often running Android or Linux operating systems, seem better suited for online monitoring or data acquisition in field conditions. While many manufacturers offer support for developers, any solution is limited to a single device of a single manufacturer. A common data format for all ADP data would allow development of applications and quicker distribution of new post processing methodologies across the industry.

An Enchanted Tool? Humanitarian Assistance and the ILC Draft Articles on the Protection of Persons in the Event of Disasters

Despite previous attempts at codification of international law regarding international responses to natural and human-made disasters, there is currently no binding international legal framework to regulate the provision of humanitarian assistance outside armed conflicts. Nevertheless, since the International Law Commission (ILC) included the protection of persons in the event of disasters on its programme of work in 2006, it has provisionally adopted eleven draft articles that have the potential to create binding obligations on states and humanitarian actors in disaster settings. Draft articles adopted include the definition of ‘a disaster’, the relationship of the draft articles to the international humanitarian law of armed conflict, recognition of the inherent dignity of the human person, and the duty of international cooperation. However, the final form of the draft articles has not been agreed. The Codification Division of the UN Office of Legal Affairs has proposed a framework convention format, which has seen support in the ILC and the UN General Assembly Sixth Committee. The overall aim of this article is to provide an analysis of the potential forms of international regulation open to the ILC and states in the context of humanitarian responses to disasters. However to avoid enchanting the ILC draft articles with unwarranted power, any examination of form requires an understanding of the substantive subject matter of the planned international regulation. The article therefore provides an overview of the international legal regulation of humanitarian assistance following natural and human-made disasters, and the ILC’s work to date on the topic. It then examines two key issues that remain to be addressed by the ILC and representatives of states in the UN General Assembly Sixth Committee. Drawing on the UN Guiding Principles on Internal Displacement, the development and implications of binding and non-binding international texts are examined, followed by an analysis of the suggested framework convention approach identified by the Special Rapporteur as a potential outcome of the ILC work.

Sovereignty, Article 4(2) TEU and the Respect of National Identities: Swinging the Balance of Power in Favour of the Member States?

The question of whether and to what extent sovereignty has been transferred to the European Union (EU) from its Member States remains a central debate within the EU and is interlinked with issues such as Kompetenz-Kompetenz, direct effect and primacy. Central to any claim to sovereignty is the principle of primacy, which requires that Member States uphold EU law over national law where there is a conflict. However, limitations to primacy can traditionally be found in national jurisprudence and the Maastricht Treaty introduced a possible EU limitation with the requirement that the EU respect national identities of Member States. The Lisbon Treaty provided only minimal further support to the principle of primacy whilst simultaneously developing the provision on national identities, now found within Article 4(2) TEU. There are indications from the literature, national constitutional courts and the Court of Justice of the EU that the provision is gathering strength as a legal tool and is likely to have a wider scope than the text might indicate. In its new role, Article 4(2) TEU bolsters the Member States’ claim to sovereignty and the possibility to uphold aspects crucial to them in conflict with EU law and the principle of primacy. Consequently, it is central to the relationship between the constitutional courts of the Member States and the CJEU, and where the final elements of control remain in ‘hard cases’. However, it does so as part of EU law, thereby facilitating the evasion of direct fundamental conflicts and reflecting the concept of constitutional pluralism.

‘Bricolage’: reclaiming a conceptual tool

This article provides the genealogy of bricolage and underscores the modifications it has undergone within the sociologies of culture and religion. It draws on the study of three new religious movements that teach unconventional versions of Hinduism and kabbalah, to show that the current understanding of bricolage in the studies of popular culture and religion overestimates its eclectic and personal nature and neglects its sociocultural logics. It tends to take for granted the availability of cultural resources used in bricolage, and finally it fails to understand the social significance of individualism, overlooking the ways in which norms and power could be expressed through culture in the contemporary world. This article suggests that it would be best reclaiming bricolage’s original meaning, prompting questions about the contexts that make certain elements available, social patterns that may organise bricolage, who ‘bricole’, what for, who is empowered, from what and by using whose tradition.

Tool life and hole surface integrity studies for hole-making of Ti6Al4V Alloy

With a significant growth in the use of titanium alloys in the aviation manufacturing industry, the key challenge of making high-quality holes in the aircraft assembly process needs to be addressed. In this work, case studies deploying traditional drilling and helical milling technologies are carried out to investigate the tool life and hole surface integrity for hole-making of titanium alloy. Results show that the helical milling process leads to much longer tool life, generally lower hole surface roughness, and higher hole subsurface microhardness. In addition, no plastically deformed layer or white layer has been observed in holes produced by helical milling. In contrast, a slightly softened region was always present on the drilled surface. The residual stress distributions within the hole surface, including compressive and tensile residual stress, have also been investigated in detail.