Polybius’ ‘previous landslide’: Proof that Hannibal’s invasion route crossed the col de la traversette

Both Polybius and Livy described a landslide/landslip that blocked the Punic Army’s exfiltration from a high col on the water divide in the Western Alps. The landslide, more aptly termed rockfall, has been a source of contention amongst classicists for centuries despite the fact that only two cols—Clapier and Traversette—exhibit rockfall debris on the lee side of the Alps. While the Clapier rockfall is too small and too young to have provided blockage, the Traversette debris is nearly as Polybius described it when he retraced the invasion route some 60 years after the event. His ‘two-tier’ description of the deposit, a doublet of younger and older rock rubble, including measurements of width and volume are close to modern measurements and prove that he knew, in advance, the route Hannibal had followed. It would take a practiced eye to correctly identify the stratigraphic complexity inherent in the Traversette Rockfall. Here we present weathering ratios, soil stratigraphic, mineral, chemical and microbiological evidence in support of Polybius’ observations as a considerable background database for future geoarchaeological exploration.

Weathering rinds as mirror images of palaeosols: Examples from the Western Alps with correlation to Antarctica and Mars

Weathering rinds have been used for decades as relative age indicators to differentiate glacial deposits in long Quaternary sequences, but only recently has it been shown that rinds contain long and extensive palaeoenvironmental records that often extend far beyond mere repositories of chemical weathering on both Earth and Mars. When compared with associated palaeosols in deposits of the same age, rinds often carry a zonal weathering record that can be correlated with palaeosol horizon characteristics, with respect to both abiotic and biotic parameters. As demonstrated with examples from the French and Italian Alps, rinds in coarse clastic sediment contain weathering zones that correlate closely with horizon development in associated palaeosols of presumed Late Glacial age. In addition to weathering histories in both rinds and palaeosols, considerable evidence exists to indicate that the black mat impact (12.8 ka) reached the European Alps, a connection with the Younger Dryas readvance supported by both mineral and chemical composition. Preliminary metagenomic microbial analysis using density gradient gel electrophoresis suggests that the eubacterial microbial population found in at least one Ah palaeosol horizon associated with a rind impact site is different from that in other Late Glacial and Younger Dryas surface palaeosol horizons. © 2013 The Geological Society of London.

Applying a QSPR correlation to the prediction of surface tensions of ionic liquids

Ionic liquids (ILs) have attracted large amount of interest due to their unique properties. Although large effort has been focused on the investigation of their potential application, characterization of ILs properties and structure–property relationships of ILs are poorly understood. Computer aided molecular design (CAMD) of ionic liquids (ILs) can only be carried if predictive computational methods for the ILs properties are available. The limited availability of experimental data and their quality have been preventing the development of such tools. Based on experimental surface tension data collected from the literature and measured at our laboratory, it is here shown how a quantitative structure–property relationship (QSPR) correlation for parachors can be used along with an estimation method for the densities to predict the surface tensions of ILs. It is shown that a good agreement with literature data is obtained. For circa 40 ionic liquids studied a mean percent deviation (MPD) of 5.75% with a maximum deviation inferior to 16% was observed. A correlation of the surface tensions with the molecular volumes of the ILs was developed for estimation of the surface tensions at room temperature. It is shown that it can describe the experimental data available within a 4.5% deviation. The correlations here developed can thus be used to evaluate the surface tension of ILs for use in process design or in the CAMD of new ionic liquids.

Recent applications of Chemical Imaging to pharmaceutical process monitoring and quality control

Chemical Imaging (CI) is an emerging platform technology that integrates conventional imaging and spectroscopy to attain both spatial and spectral information from an object. Vibrational spectroscopic methods, such as Near Infrared (NIR) and Raman spectroscopy, combined with imaging are particularly useful for analysis of biological/pharmaceutical forms. The rapid, non-destructive and non-invasive features of CI mark its potential suitability as a process analytical tool for the pharmaceutical industry, for both process monitoring and quality control in the many stages of drug production. This paper provides an overview of CI principles, instrumentation and analysis. Recent applications of Raman and NIR-CI to pharmaceutical quality and process control are presented; challenges facing Cl implementation and likely future developments in the technology are also discussed. (C) 2007 Elsevier B.V. All rights reserved.

The addition of CO2 to four superbase ionic liquids: a DFT study

The addition of carbon dioxide to four superbase ionic liquids, [P3333][Benzim], [P3333][124Triz], [P3333][123Triz] and [P3333][Bentriz] was studied using a molecular DFT approach involving anions alone and individual ion pairs. Intermolecular bonding within the individual ion pairs is characterised by a number of weak hydrogen bonds, with the superbase anion geometrically arranged so as to maximize interactions between the heterocyclic N atoms and the cation. The pairing energies show no correlation to the observed CO2 adsorption capacity. Addition of CO2 to the anion alone clearly resulted in the formation of a covalently-bound carbamate function with the strength of binding correlated to experimental capacity. In the ion pair however the cation significantly alters the nature of the bonding such that the overall cohesive energy is reduced. Formation of a strong carbamate function occurs at the expense of weakening the interaction between anion and cation. In the more weakly absorbing ion pairs which contain [123Triz]- and [Bentriz]-, the carbamate-functionalised systems are very close in energy to adducts in which CO2 is more weakly bound, suggesting an equilibrium between the chemi- and physisorbed CO2.

A critical evaluation of Raman spectroscopy for the analysis of lipids: fatty acid methyl esters.

The work presented here is aimed at determining the potential and limitations of Raman spectroscopy for fat analysis by carrying out a systematic investigation of C-4-C-24 FAME. These provide a simple, well-characterized set of compounds in which the effect of making incremental changes can be studied over a wide range of chain lengths and degrees of unsaturation. The effect of temperature on the spectra was investigated over much larger ranges than would normally be encountered in real analytical measurements. It was found that for liquid FAME the best internal standard band was the carbonyl stretching vibration nu(C = O), whose position is affected by changes in sample chain length and physical state; in the samples studied here, it was found to lie between 1729 and 1748 cm(-1). Further, molar unsaturation could be correlated with the ratio of the nu(C = O) to either nu(C = C) or delta(H-C = ) with R-2 > 0.995. Chain length was correlated with the delta(CH2)(tw)/nu(C = O) ratio, (where "tw" indicates twisting) but separate plots for odd- and even-numbered carbon chains were necessary to obtain R-2 > 0.99 for liquid samples. Combining the odd- ani even-numbered carbon chain data in a single plot reduced the correlation to R-2 = 0.94-0.96, depending on the band ratios used. For molal unsaturation the band ratio that correlated linearly with unsaturation (R-2 > 0.99) was nu(C = C)/delta(CH2)(SC) (where "sc" indicates scissoring). Other band ratios show much more complex behavior with changes in chemical and physical structure. This complex behavior results from the fact that the bands do not arise from simple vibrations of small, discrete regions of the molecules but are due to complex motions of large sections of the FAME so that making incremental changes in structure does not necessarily lead to simple incremental changes in spectra.

Response of surface horizons in an oak forest to prescribed burning

The reduction of forest floor ground cover and litter layers by prescribed fires may alter the morphology (field and micro) and physical properties of surface horizons. This study determined long-term (35 yr) changes in surface horizon bulk density, organic matter concentration and content, and morphology in response to periodic (5 yr) and annual (1 yr) prescribed fires. Soils were fine-silty, siliceous, thermic Glossic Fragiuldults, supporting mixed oak vegetation in middle Tennessee. Upper mineral soils (0- to 2-cm and 0- to 7.6-cm depths) were sampled and detailed field descriptions made. Periodic and control plots had a thin layer of Oi, Oe, and Oa horizons 5 yr after the 1993 burn, whereas on annual burn plots a 1- to 2-cm charred layer was present. Significant reductions in organic matter concentration and mean thickness of the A horizon were found from burning (A horizons thicknesses were 6.4, 4.6, and 2.9 cm in control, periodic, and annual plots, respectively). Periodic burns did not significantly alter the organic matter and bulk density of the upper 7.6 cm of mineral soil; however, annual burns did result in significantly higher bulk densities (1.01, 1.07, and 1.29 Mg m-3 in control, periodic, and annual plots, respectively) and lower organic matter concentrations and contents. Microscopic investigations confirmed that compaction was increased from annual burning. Thin sections also revealed that the granular structure of the A horizons in control and periodic plots resulted from bioterbation of macro and mesofauna, fungi, and roots. Long-term annual burning greatly affected surface soil properties, whereas periodic burning on a 5-yr cycle had only limited effects.

Nutritional status of adult ewes during early and mid-pregnancy. 2. Effects of supplementation with selenised yeast on ewe reproduction and offspring performance to weaning

The objective of this study was to determine the effects of selenium (Se) supplementation of mature ewes in the period from day - 14 to day 90 post mating on Se status, productivity and viability of ewes and their offspring. Multiparous crossbred ewes (n = 82) were randomly assigned to receive a standard dried grass-based diet (control) or dried grass diet supplemented with 1 g of selenised yeast (Selplex (R)), providing 0.5 mg Se per ewe per day. After day 90 post mating, all ewes were offered grass-based diets supplemented with a standard multivitamin and mineral mix, up to lambing. Ewes that were fed additional Se had increased (P 0,05). Supplemented ewes weaned lambs on average 2 kg heavier than control ewes, due to the higher (P

Combining bio- and chemo-catalysis: from enzymes to cells, from petroleum to biomass

In the future, biomass will continue to emerge as a viable source of chemicals. The development of new industries that utilize bio-renewables provides opportunities for innovation. For example, bio- and chemo-catalysts can be combined in 'one pot' to prepare chemicals of commercial value. This has been demonstrated using isolated enzymes and whole cells for a variety of chemical transformations. The one-pot approach has been successfully adopted to convert chemicals derived from biomass, and, in our opinion, it has an important role to play in the design of a more sustainable chemical industry. To implement new one-pot bio- and chemo-catalytic processes, issues of incompatibility must be overcome; the strategies for which are discussed in this opinion article.

A PEPTIDE FROM THE CAUDAL NEUROSECRETORY-SYSTEM OF THE DOGFISH SCYLIORHINUS-CANICULA THAT IS STRUCTURALLY RELATED TO UROTENSIN-I

Using reversed-phase HPLC in combination with a radioimmunoassay for ovine corticotropin-releasing hormone (CRH), a peptide with CRH-like immunoreactivity was isolated in pure form from an extract of the caudal spinal cord region of the spotted dogfish, Scyliorhinus canicula. The primary structure of the peptide was established as Pro-Ala-Glu-Thr-Pro-Asn-Ser-Leu-Asp-Leu(10)-Thr-Phe-His-Leu-Leu-Arg-Glu-Met-Ile-Glu(20)-Ile-Ala-Lys-His-Glu-Asn-Gln-Gln-Met-Gln(30)-Ala-Asp-Ser-Asn-Arg-Arg-Ile-Met-Asp-Thr(40)-Ile . NH2. This amino acid sequence shows moderate structural similarity to Catostomus urotensin I (51%) and to human CRH (56%). The data provide, therefore, chemical evidence to support the conclusions of earlier immunohistochemical studies that the diffuse caudal neurosecretory system of elasmobranchs produces a peptide that is immunochemically related to teleost urotensin I peptides. However, the primary structure of urotensin I has been poorly conserved during evolution. (C) 1995 Academic Press, Inc.

Weathering Rinds: Archives of Paleoenvironments on Mount Kenya, East Africa

Weathering-rind thicknesses on pebble-and cobble-size sediment have been used for the past half-century, at least, as an age indicator of postdepositional time following a geologic event. In mountainous terrain, rind thickness is taken as a measurement of weathering over time frames of 0.5 m.yr.; variable thicknesses are used to discriminate relative ages of glacial deposits. The effects of chemical and physical weathering that together produce rinds are only rarely considered, and most research objectives have centered on lichen alteration of clast surfaces. Recent microscopic analyses of weathering rinds on volcanic clasts of similar to 70.0-ka to similar to 2.0-m.yr. age produced new data on weathering products as well as unexpected incorporated biotic materials undergoing diagenesis. The question as to how much physical/mineral/chemical/ biotic paleoenvironmental data might be archived in rinds is discussed. The character and classification of organic materials undergoing diagenesis are also discussed.

Development of a biocidal treatment regime to inhibit biological growths on cultural heritage: BIODAM

Existing chemical treatments to prevent biological damage to monuments often involve considerable amounts of potentially dangerous and even poisonous biocides. The scientific approach described in this paper aims at a drastic reduction in the concentration of biocide applications by a polyphasic approach of biocides combined with cell permeabilisers, polysaccharide and pigment inhibitors and a photodynamic treatment. A variety of potential agents were screened to determine the most effective combination. Promising compounds were tested under laboratory conditions with cultures of rock deteriorating bacteria, algae, cyanobacteria and fungi. A subsequent field trial involved two sandstone types with natural biofilms. These were treated with multiple combinations of chemicals and exposed to three different climatic conditions. Although treatments proved successful in the laboratory, field trials were inconclusive and further testing will be required to determine the most effective treatment regime. While the most effective combination of chemicals and their application methodology is still being optimised, results to date indicate that this is a promising and effective treatment for the control of a wide variety of potentially damaging organisms colonising stone substrates

Validating the use of intrinsic markers in body feathers to identify inter‑individual differences in non‑breeding areas of northern fulmars

Many wildlife studies use chemical analyses to explore spatio-temporal variation in diet, migratory patterns and contaminant exposure. Intrinsic markers are particularly valuable for studying non-breeding marine predators, when direct methods of investigation are rarely feasible. However, any inferences regarding foraging ecology are dependent upon the time scale over which tissues such as feathers are formed. In this study, we validate the use of body feathers for studying non-breeding foraging patterns in a pelagic seabird, the northern fulmar. Analysis of carcasses of successfully breeding adult fulmars indicated that body feathers moulted between September and March, whereas analyses of carcasses and activity patterns suggested that wing feather and tail feather moult occurred during more restricted periods (September to October and September to January, respectively). By randomly sampling relevant body feathers, average values for individual birds were shown to be consistent. We also integrated chemical analyses of body feather with geolocation tracking data to demonstrate that analyses of δ13C and δ15N values successfully assigned 88 % of birds to one of two broad wintering regions used by breeding adult fulmars from a Scottish study colony. These data provide strong support for the use of body feathers as a tool for exploring non-breeding foraging patterns and diet in wide-ranging, pelagic seabirds.

LES of flame acceleration and DDT in hydrogen-air mixture using artificially thickened flame approach and detailed chemical kinetics

A large eddy simulation is performed to study the deflagration to detonation transition phenomenon in an obstructed channel containing premixed stoichiometric hydrogen–air mixture. Two-dimensional filtered reactive Navier–Stokes equations are solved utilizing the artificially thickened flame approach (ATF) for modeling sub-grid scale combustion. To include the effect of induction time, a 27-step detailed mechanism is utilized along with an in situ adaptive tabulation (ISAT) method to reduce the computational cost due to the detailed chemistry. The results show that in the slow flame propagation regime, the flame–vortex interaction and the resulting flame folding and wrinkling are the main mechanisms for the increase of the flame surface and consequently acceleration of the flame. Furthermore, at high speed, the major mechanisms responsible for flame propagation are repeated reflected shock–flame interactions and the resulting baroclinic vorticity. These interactions intensify the rate of heat release and maintain the turbulence and flame speed at high level. During the flame acceleration, it is seen that the turbulent flame enters the ‘thickened reaction zones’ regime. Therefore, it is necessary to utilize the chemistry based combustion model with detailed chemical kinetics to properly capture the salient features of the fast deflagration propagation.