A single microphone capillary-based system for measuring the complex input impedance of musical wind instruments

Capillary-based systems for measuring the input impedance of musical wind instruments were first developed in the mid-20th century and remain in widespread use today. In this paper, the basic principles and assumptions underpinning the design of such systems are examined. Inexpensive modifications to a capillary-based impedance measurement set-up made possible due to advances in computing and data acquisition technology are discussed. The modified set-up is able to measure both impedance magnitude and impedance phase even though it only contains one microphone. In addition, a method of calibration is described that results in a significant improvement in accuracy when measuring high impedance objects on the modified capillary-based system. The method involves carrying out calibration measurements on two different objects whose impedances are well-known theoretically. The benefits of performing two calibration measurements (as opposed to the one calibration measurement that has been traditionally used) are demonstrated experimentally through input impedance measurements on two test objects and a Boosey and Hawkes oboe. © S. Hirzel Verlag · EAA.

Measuring the psychosocial characteristics of family caregivers of palliative care patients:psychometric properties of nine self-report instruments

Researchers and clinicians have experienced substantial difficulties locating measures that are suitable for use within palliative care settings. This article details the psychometric properties of nine instruments designed to assess the following psychosocial characteristics of family caregivers: competence, mastery, self-efficacy, burden, optimism, preparedness, social support, rewards, and mutuality. Results are based on the responses of 106 primary family caregivers caring for relatives dying of cancer. Principal components extraction with varimax rotation was used to explore the underlying structure of each measure. Following the exclusion of complex variables, suggested components for most measures comprised relatively homogenous items, which were good to excellent measures of each component. Some components comprised only two items; however, Cronbach's alphas typically indicated moderate to high levels of internal consistency. Overall, the results of this study suggest that most of the measures analyzed, excepting the mastery and mutuality scales, can be recommended to examine the family caregiver experience and test supportive interventions.

Measuring the health-related quality of life of people with ischaemic heart disease.

Objectives—To inform researchers and clinicians about the most appropriate generic and disease specific measures of health related quality of life for use among people with ischaemic heart disease. Methods—MEDLINE and BIDS were searched for research papers which contained a report of at least one of the three most common generic instruments or at least one of the five disease specific instruments used with ischaemic heart disease patients. Evidence for the validity, reliability, and sensitivity of these instruments was critically appraised. Results—Of the three generic measures—the Nottingham health profile, sickness impact profile, and short form 36 (SF-36)—the SF-36 appears to offer the most reliable, valid, and sensitive assessment of quality of life. However, a few of the SF-36 subscales lack a sufficient degree of sensitivity to detect change in a patient’s clinical condition. According to the best available evidence, the quality of life after myocardial infarction questionnaire should be preferred to the Seattle angina questionnaire, the quality of life index cardiac version, the angina pectoris quality of life questionnaire, and the summary index. Overall, research on disease specific measures is sparse compared to the number of studies which have investigated generic measures. Conclusions—An assessment of the quality of life of people with ischaemic heart disease should comprise a disease specific measure in addition to a generic measure. The SF-36 and the quality of life after myocardial infarction questionnaire (version 2) are the most appropriate currently available generic and disease specific measures of health related quality of life, respectively. Further research into the measurement of health related quality of life of people with ischaemic heart disease is required in order to address the problems (such as lack of sensitivity to detect change) identified by the review.

Generic, disease-specific and individualised approaches to measuring health-related quality of life among people with heart disease - a comparative analysis.

Increasing emphasis is being placed on the evaluation of health-related quality of life. However, there is no consensus on the definition of this concept and as a result there are a plethora of existing measurement instruments. Head-to-head comparisons of the psychometric properties of existing instruments are necessary to facilitate evidence-based decisions about which instrument should be chosen for routine use. Therefore, an individualised instrument (the modified Patient Generated Index), a generic instrument (the Short Form 36) and a disease-specific instrument (the Quality of Life after Myocardial Infarction questionnaire) were administered to patients with ischaemic heart disease (n=117) and the evidence for the validity, reliability and sensitivity of each instrument was examined and compared. The modified Patient Generated Index compared favourably with the other instruments but none of the instruments examined provided sound evidence for sensitivity to change. Therefore, any recommendation for the use of the individualised approach in the routine collection of health-related quality of life data in clinical practice must be conditional upon the submission of further evidence to support the sensitivity of such instruments.

Photodiodes array as potential diagnostic for measuring short bursts of K-alpha radiation from Ti targets irradiated with 45 fs laser pulses

We report on a study comparing absolute K-alpha yield from Ti foils measured with a calibrated system of an X-ray CCD coupled to a curved LiF Von-Hamos crystal spectrometer to the difference in the signals measured simultaneously with two similar photodiodes fitted with two different filters. Our data indicate that a combination of photodiodes with different filters could be developed into an alternative and inexpensive diagnostic for monitoring single shot pulsed emission in a narrow band of X-ray region.

Measuring icon complexity: An automated analysis

Measures of icon designs rely heavily on surveys of the perceptions of population samples. Thus, measuring the extent to which changes in the structure of an icon will alter its perceived complexity can be costly and slow. An automated system capable of producing reliable estimates of perceived complexity could reduce development costs and time. Measures of icon complexity developed by Garcia, Badre, and Stasko (1994) and McDougall, Curry, and de Bruijn (1999) were correlated with six icon properties measured using Matlab (MathWorks, 2001) software, which uses image-processing techniques to measure icon properties. The six icon properties measured were icon foreground, the number of objects in an icon, the number of holes in those objects, and two calculations of icon edges and homogeneity in icon structure. The strongest correlates with human judgments of perceived icon complexity (McDougall et al., 1999) were structural variability (r(s) = .65) and edge information (r(s) =.64).

Assessment of a multiplexing high throughput immunochemical SPR biosensor in measuring multiple proteins on a single biosensor chip

Multiplexed immunochemical detection platforms offer the potential to decrease labour demands, increase sample throughput and decrease overall time to result. A prototype four channel multiplexed high throughput surface plasmon resonance biosensor was previously developed, for the detection of food related contaminants. A study focused on determining the instruments performance characteristics was undertaken. This was followed by the development of a multiplexed assay for four high molecular weight proteins. The protein levels were simultaneously evaluated in serum samples of 10-week-old veal calves (n = 24) using multiple sample preparation methods. Each of the biosensor's four channels were shown to be independent of one another and produced multiplexed within run repeatability (n = 6) ranging from 2.0 to 6.7%CV, for the four tested proteins, whilst between run reproducibility (n = 4) ranged from 1.5 to 8.9%CV. Four calibration curves were successfully constructed before serum sample preparation was optimised for each protein. Multiplexed concentration analysis was successfully performed on four channels revealing that each proteins concentration was consistent across the twenty-four tested animals. Signal reproducibility (n > 19) on a further long term study revealed coefficient of variation ranging from 1.1% to 7.3% and showed that the multiplexed assay was stable for at least 480 cycles. These findings indicate that the performance characteristics fall within the range of previously published data for singleplex optical biosensors and that the multiplexing biosensor is fit-for-purpose for simultaneous concentration analysis in many different types of applications such as the multiplexed detection of markers of growth-promoter abuse and multiplexed detection of residues of concern in food safety. © 2013 Elsevier B.V.

Two-wire thermocouples: A nonlinear state estimation approach to temperature reconstruction.

The problem of measuring high frequency variations in temperature is described, and the need for some form of reconstruction introduced. One method of reconstructing temperature measurements is to use the signals from two thermocouples of differing diameter. Two existing methods for processing such measurements and reconstructing the higher frequency components are described. These are compared to a novel reconstruction algorithm based on a nonlinear extended Kalman filter. The performance of this filter is found to compare favorably, in a number of ways, with the existing techniques, and it is suggested that such a technique would be viable for the online reconstruction of temperatures in real time.