Retrofit versus new-build house using life-cycle assessment

This paper reports the findings of research on the environmental performance of two case-study houses, a retrofit and new build. The retrofit was completed to a Passivhaus standard while the new build was completed to current Irish building regulations. Environmental performance of the retrofit and new build was measured using life-cycle assessments, examining the assembly, operational and end-of-life stage over life spans of 50 and 80 years. Using primary information, life-cycle assessment software and life-cycle assessment databases the environmental impacts of each stage were modelled. The operational stage of both case studies was found to be the source of the most significant environmental damage, followed by the assembly and the end-of-life stage respectively. The relative importance of the assembly and end-of-life stage decreased as the life span increased. It was found that the retrofit house studied outperformed the new build in the assembly and operational stage, whereas the new build performed better in the end-of-life stage; however, this is highly sensitive, depending on the standards to which both are completed. Operational energy savings pre- and post-retrofit were significant, indicating the future potential for adoption of high-quality retrofitting practices.

A streamlined life-cycle assessment and decision tool for used tyres recycling

In order to achieve progress towards sustainable resource management, it is essential to evaluate options for the reuse and recycling of secondary raw materials, in order to provide a robust evidence base for decision makers. This paper presents the research undertaken in the development of a web-based decision-support tool (the used tyres resource efficiency tool) to compare three processing routes for used tyres compared to their existing primary alternatives. Primary data on the energy and material flows for the three routes, and their alternatives were collected and analysed. The methodology used was a streamlined life-cycle assessment (sLCA) approach. Processes included were: car tyre baling against aggregate gabions; car tyre retreading against new car tyres; and car tyre shred used in landfill engineering against primary aggregates. The outputs of the assessment, and web-based tool, were estimates of raw materials used, carbon dioxide emissions and costs. The paper discusses the benefits of carrying out a streamlined LCA and using the outputs of this analysis to develop a decision-support tool. The strengths and weakness of this approach are discussed and future research priorities identified which could facilitate the use of life cycle approaches by designers and practitioners.

Life Cycle Assessment guidelines for the sustainable production and recycling of aggregates:The Sustainable Aggregates Resource Management project (SARMa)

The mining/quarrying industry is a sector of industry where there are very few Life Cycle Assessment (LCA) tools, and where the role of LCA has been poorly investigated. A key issue is the integration of three inter-dependent life cycles: Project, Asset and Product. Given the unique features of mining LCAs, this Note from the Field presents a common methodology implemented within the Sustainable Aggregates Resource Management (SARMa) Project (www.sarmaproject.eu) in order to boost adoption of LCA in the aggregate industry in South Eastern Europe. The proposed methodology emphasises the importance of resource efficiency and recycling in the context of a Sustainable Supply Mix of aggregates for the construction industry. Through its adoption, aggregate producers, recyclers, and governmental planners would gain confidence with LCA tools and conduct consistent and meaningful life cycle analyses of natural and recycled aggregates. © 2011 Elsevier Ltd. All rights reserved.

Techno-Economic and Life Cycle Assessment on Lignocellulosic Biomass Thermochemical Conversion Technologies: A Review

Bioenergy derived from biomass provides a promising energy alternative and can reduce the greenhouse gas (GHG) emissions generated from fossil fuels. Biomass-based thermochemical conversion technologies have been acknowledged as apt options to convert bioresources into bioenergy; this bioenergy includes electricity, heat, and fuels/chemicals in solid, liquid, and gaseous phases. In this review, the techno-economic and life cycle assessment of these technologies (combustion, gasification, pyrolysis, liquefaction, carbonization, and co-firing) are summarized. Specific indicators (production costs in a techno-economic analysis, functional units and environmental impacts in a life cycle analysis) for different technologies were compared. Finally, gaps in research and future trends in biomass thermochemical conversion were identified. This review could be used to guide future research related to economic and environmental benefits of bioenergy.

Techno-Economic and Life Cycle Assessment for the Production of Green Composites

Botanically, green composites belong to an economically important seed plant family that includes maize, wheat, rice, and sorghum known as Saccharum offi cinarum. There are so many natural fibers available in the environment such as rice husk, hemp fibers, flax fibers, bamboo fibers, coconut fiber, coconut coir, grawia optiva and many others also. Life Cycle Assessment (LCA) is a process to estimate the environmental feature and potential impacts related to a product, by organizing a directory of pertinent inputs and outputs of a product system, assessing the potential environmental impacts related with the said inputs and outputs, explaining the results of the inventory analysis and impact evaluation phases in connection to the objectives of the study. Particularly Bagasse, an agricultural residue not only becomes a problem from the environmental point of view, but also affects the profitability of the sugarcane industries. This chapter discusses the properties, processing methods and various other aspects including economic and environmental aspects related to green composites.

Making space: English women, letter-writing, and the life of the mind, c.1650-1750

This article uses women's letter-writing from the late seventeenth and early eighteenth centuries to explore the home as a site of female intellectual endeavour. Far from representing a static backdrop to the action of domestic life, the home played a dynamic role in women's experiences of the life of the mind and shaped the ways in which women thought and wrote. Letters were penned in dining rooms, parlours and closets, by firesides, and on desks and laps. In their letters, women projected images of themselves scribbling epistles to friends in order to maintain their mental intimacy. Space was both real and imagined and the physical realities of a hand-written and hand-delivered letter gave way to the imaginative possibilities brought by networks of epistolary exchange and the alternative spaces of creative thought. By reinstating the home more fully in the history of female intellectual experience, a more nuanced view of the domestic arena can be developed: one that sees the home not as a site of exclusion and confinement, but as a space for scholarship and exchange. 

Caries and the older patient

Ageing of the population, together with prolonged retention of teeth, has brought new challenges to dentistry. Whereas in the past oral care for the elderly was restricted to provision of dentures, older patients are now presenting with dental caries and failed restorations. These problems may have an impact on their general health and quality of life. Poor oral hygiene, xerostomia and diet are among the risk factors for caries in older patients and need to be addressed in order to achieve control of the disease. Carious lesions can be treated conservatively in many cases or may need surgical management.

CLINICAL RELEVANCE: Caries is an oral health issue among older patients and can result in tooth loss. Oral health has a great impact on general health and quality of life of elderly people.

Understanding aerospace composite components' supply chain carbon emissions

This paper examines a large structural component and its supply chain. The component is representative of that used in the production of civil transport aircraft and is manufactured from carbon fibre epoxy resin prepreg, using traditional hand layup and autoclave cure. Life cycle assessment (LCA) is used to predict the component’s production carbon emissions. The results determine the distribution of carbon emissions within the supply chain, identifying the dominant production processes as carbon fibre manufacture and composite part manufacture. The elevated temperature processes of material and part creation, and the associated electricity usage, have a significant impact on the overall production emissions footprint. The paper also demonstrates the calculation of emissions footprint sensitivity to the geographic location and associated energy sources of the supply chain. The results verify that the proposed methodology is capable of quantitatively linking component and supply chain specifics to manufacturing processes and thus identifying the design drivers for carbon emissions in the manufacturing life of the component.

Space Science News: from archive to teaching resource, the secret life of newspapers

Worldwide, science education reform is aiming to promote 'scientific literacy' among young people. Typically, this is taken to include empowering them to engage critically with science in news media. This study explored the extent and nature of secondary science teachers' use of newspapers. It found that, though a great many use the resource, the majority do so incidentally and with the intention of showing the relevance of the subject rather than developing their students' criticality.

Assessment of data quality in a multi-centre cross-sectional study of participation and quality of life of children with cerebral palsy

Background: SPARCLE is a cross-sectional survey in nine European regions, examining the relationship of the environment of children with cerebral palsy to their participation and quality of life. The objective of this report is to assess data quality, in particular heterogeneity between regions, family and item non-response and potential for bias. Methods: 1,174 children aged 8–12 years were selected from eight population-based registers of children with cerebral palsy; one further centre recruited 75 children from multiple sources. Families were visited by trained researchers who administered psychometric questionnaires. Logistic regression was used to assess factors related to family non-response and self-completion of questionnaires by children. Results: 431/1,174 (37%) families identified from registers did not respond: 146 (12%) were not traced; of the 1,028 traced families, 250 (24%) declined to participate and 35 (3%) were not approached. Families whose disabled children could walk unaided were more likely to decline to participate. 818 children entered the study of which 500 (61%) self-reported their quality of life; children with low IQ, seizures or inability to walk were less likely to self-report. There was substantial heterogeneity between regions in response rates and socio-demographic characteristics of families but not in age or gender of children. Item non-response was 2% for children and ranged from 0.4% to 5% for questionnaires completed by parents. Conclusion: While the proportion of untraced families was higher than in similar surveys, the refusal rate was comparable. To reduce bias, all analyses should allow for region, walking ability, age and socio-demographic characteristics. The 75 children in the region without a population based register are unlikely to introduce bias