Hardware Software Interface: a Strategy for the implementation of Urban Agriculture

This paper describes how urban agriculture differs from conventional agriculture not only in the way it engages with the technologies of growing, but also in the choice of crop and the way these are brought to market. The authors propose a new model for understanding these new relationships, which is analogous to a systems view of information technology, namely Hardware-Software- Interface.
The first component of the system is hardware. This is the technological component of the agricultural system. Technology is often thought of as equipment, but its linguistic roots are in ‘technis’ which means ‘know how’. Urban agriculture has to engage new technologies, ones that deal with the scale of operation and its context which is different than rural agriculture. Often the scale is very small, and soils are polluted. There this technology in agriculture could be technical such as aquaponic systems, or could be soil-based agriculture such as allotments, window-boxes, or permaculture. The choice of method does not necessarily determine the crop produced or its efficiency. This is linked to the biotic that is added to the hardware, which is seen as the ‘software’.
The software of the system are the ecological parts of the system. These produce the crop which may or may not be determined by the technology used. For example, a hydroponic system could produce a range of crops, or even fish or edible flowers. Software choice can be driven by ideological preferences such as permaculture, where companion planting is used to reduce disease and pests, or by economic factors such as the local market at a particular time of the year. The monetary value of the ‘software’ is determined by the market. Obviously small, locally produced crops are unlikely to compete against intensive products produced globally, however the value locally might be measured in different ways, and might be sold on a different market. This leads to the final part of the analogy - interface.
The interface is the link between the system and the consumer. In traditional agriculture, there is a tenuous link between the producer of asparagus in Peru and the consumer in Europe. In fact very little of the money spent by the consumer ever reaches the grower. Most of the money is spent on refrigeration, transport and profit for agents and supermarket chains. Local or hyper-local agriculture needs to bypass or circumvent these systems, and be connected more directly to the consumer. This is the interface. In hyper-localised systems effectiveness is often more important than efficiency, and direct links between producer and consumer create new economies.

A marine reservoir correction database and on-line interface

Calibration is essential for interpretation of radiocarbon dates, especially when the 14C dates are compared to historical or climatic records with a different chronological basis. 14C ages of samples from the marine environment, such as shells or fish bones, or samples with a marine component, such as human bone in coastal regions, require an additional consideration because of the reservoir age of the ocean. While the pre-industrial global mean reservoir correction, R(t), is about 400 years, local variations (?R) can be several hundred years or more. ?R compilations on a global scale have been undertaken previously (Stuiver et al. 1986; Stuiver and Braziunas 1993), but have not been updated recently. Here we describe an on-line reservoir correction database accessed via mapping software. Rather than publishing a static ?R compilation, new data will be incorporated when it becomes available. The on-line marine reservoir correction database can be accessed at the website http://www.calib.org/.

Determination of the heat transfer coefficient at the metal–die interface for high pressure die cast AlSi9Cu3Fe

When simulating the High Pressure Die Casting ‘HPDC’ process, the heat transfer coefficient ‘HTC’ between the casting and the die is critical to accurately predict the quality of the casting. To determine the HTC at the metal–die interface a production die for an automotive engine bearing beam, Die 1, was instrumented with type K thermocouples. A Magmasoft® simulation model was generated with virtual thermocouple points placed in the same location as the production die. The temperature traces from the simulation model were compared to the instrumentation results. Using the default simulation HTC for the metal–die interface, a poor correlation was seen, with the temperature response being much less for the simulation model. Because of this, the HTC at the metal–die interface was modified in order to get a better fit. After many simulation iterations, a good fit was established using a peak HTC of 42,000 W/m2 K, this modified HTC was further validated by a second instrumented production die, proving that the modified HTC gives good correlation to the instrumentation trials. The updated HTC properties for the simulation model will improve the predictive capabilities of the casting simulation software and better predict casting defects.

Effect of the crown design and interface lute parameters on the stress-state of a machined crown-tooth system: A finite element analysis

The effect of preparation design and the physical properties of the interface lute on the restored machined ceramic crown-tooth complex are poorly understood. The aim of this work was to determine, by means of three-dimensional finite element analysis (3D FEA) the effect of the tooth preparation design and the elastic modulus of the cement on the stress state of the cemented machined ceramic crown-tooth complex. The three-dimensional structure of human premolar teeth, restored with adhesively cemented machined ceramic crowns, was digitized with a micro-CT scanner. An accurate, high resolution, digital replica model of a restored tooth was created. Two preparation designs, with different occlusal morphologies, were modeled with cements of 3 different elastic moduli. Interactive medical image processing software (mimics and professional CAD modeling software) was used to create sophisticated digital models that included the supporting structures; periodontal ligament and alveolar bone. The generated models were imported into an FEA software program (hypermesh version 10.0, Altair Engineering Inc.) with all degrees of freedom constrained at the outer surface of the supporting cortical bone of the crown-tooth complex. Five different elastic moduli values were given to the adhesive cement interface 1.8 GPa, 4 GPa, 8 GPa, 18.3 GPa and 40 GPa; the four lower values are representative of currently used cementing lutes and 40 GPa is set as an extreme high value. The stress distribution under simulated applied loads was determined. The preparation design demonstrated an effect on the stress state of the restored tooth system. The cement elastic modulus affected the stress state in the cement and dentin structures but not in the crown, the pulp, the periodontal ligament or the cancellous and cortical bone. The results of this study suggest that both the choice of the preparation design and the cement elastic modulus can affect the stress state within the restored crown-tooth complex.

Software-Managed Energy-Efficient Hybrid DRAM/NVM Main Memory

This paper evaluates the viability of user-level software management of a hybrid DRAM/NVM main memory system. We propose an operating system (OS) and programming interface to place data from within the user application. We present a profiling tool to help programmers decide on the placement of application data in hybrid memory systems. Cycle-accurate simulation of modified applications confirms that our approach is more energy-efficient than state-of-the- art hardware or OS approaches at equivalent performance. Moreover, our results are validated on several candidate NVM technologies and a wide set of 14 benchmarks.
The key observation behind this work is that, for the work- loads we evaluated, application objects are too short-lived to motivate migration. Utilizing this property significantly reduces the hardware complexity of hybrid memory systems.