Synchrotron X-ray diffraction study of the phase transformations in titanium alloys

High-resolution synchrotron X-ray diffraction was used to study the phase transformations in titanium alloys. Three titanium alloys were investigated: Ti-6Al-4V, Ti-6Al-2Sn-4Zr-2Mo-0.08Si and beta21s. Both room and high temperature measurements were performed. The room temperature experiments were performed to study the structure of the alloys after different heat treatments, namely as received (AR), furnace cooling (FC), water quenching (WQ) and water quenching followed by ageing. The alpha, alpha', alpha'' and beta phases were observed in different combinations depending on the heat treatment conditions and the alloy studied. A multicomponent hexagonal close packed (hcp) alpha phase, with different c and the same a lattice parameters, was detected in Ti-6Al-4V after FC. High temperature synchrotron X-ray diffraction was used for 'in situ' study of the transformations on the sample surface at elevated temperatures. The results were used to trace the kinetics of surface oxidation and the concurrent phase transformations taking place under different conditions. The influence of the temperature and oxygen content on the lattice parameters of the alpha phase was derived and new data obtained on the coefficients of thermal expansion in the different directions of the hcp alpha phase, for Ti-6Al-4V and Ti-6Al-2Sn-4Zr-2Mo-0.08Si.

N2O and NO2 formation on Pt(111): A density functional theory study

Catalytic formation of N2O and NO2 were studied employing density functional theory with generalized gradient approximations, in order to investigate the microscopic reaction pathways of these catalytic processes on a Pt(111) surface. Transition states and reaction barriers for the addition of chemisorbed N or chemisorbed O to NO(ads) producing N2O and NO2, respectively, were calculated. The N2O transition state involves bond formation across the hcp hollow site with an associated reaction barrier of 1.78 eV. NO2 formation favors a fcc hollow site transition state with a barrier of 1.52 eV. The mechanisms for both reactions are compared to CO oxidation on the same surface. The activation of the chemisorbed NO and the chemisorbed N or O from the energetically stable initial state to the transition state are both significant contributors to the overall reaction barrier E-a, in contrast to CO oxidation in which the activation of the O-(ads) is much greater than CO(ads) activation. (C) 2002 American Institute of Physics.

BcsK(C) Is an Essential Protein for the Type VI Secretion System Activity in Burkholderia cenocepacia That Forms an Outer Membrane Complex with BcsL(B)

The type VI secretion system (T6SS) contributes to the virulence of Burkholderia cenocepacia, an opportunistic pathogen causing serious chronic infections in patients with cystic fibrosis. BcsK(C) is a highly conserved protein among the T6SSs in Gram-negative bacteria. Here, we show that BcsK(C) is required for Hcp secretion and cytoskeletal redistribution in macrophages upon bacterial infection. These two phenotypes are associated with a functional T6SS in B. cenocepacia. Experiments employing a bacterial two-hybrid system and pulldown assays demonstrated that BcsK(C) interacts with BcsL(B), another conserved T6SS component. Internal deletions within BcsK(C) revealed that its N-terminal domain is necessary and sufficient for interaction with BcsL(B). Fractionation experiments showed that BcsK(C) can be in the cytosol or tightly associated with the outer membrane and that BcsK(C) and BcsL(B) form a high molecular weight complex anchored to the outer membrane that requires BcsF(H) (a ClpV homolog) to be assembled. Together, our data show that BcsK(C)/BcsL(B) interaction is essential for the T6SS activity in B. cenocepacia.

A novel sensor kinase-response regulator hybrid controls biofilm formation and type VI secretion system activity in Burkholderia cenocepacia

Burkholderia cenocepacia is an important opportunistic pathogen causing serious chronic infections in patients with cystic fibrosis (CF). Adaptation of B. cenocepacia to the CF airways may play an important role in the persistence of the infection. We have identified a sensor kinase-response regulator (BCAM0379) named AtsR in B. cenocepacia K56-2 that shares 19% amino acid identity with RetS from Pseudomonas aeruginosa. atsR inactivation led to increased biofilm production and a hyperadherent phenotype in both abiotic surfaces and lung epithelial cells. Also, the atsR mutant overexpressed and hypersecreted an Hcp-like protein known to be specifically secreted by the type VI secretion system (T6SS) in other gram-negative bacteria. Amoeba plaque assays demonstrated that the atsR mutant was more resistant to Dictyostelium predation than the wild-type strain and that this phenomenon was T6SS dependent. Macrophage infection assays also demonstrated that the atsR mutant induces the formation of actin-mediated protrusions from macrophages that require a functional Hcp-like protein, suggesting that the T6SS is involved in actin rearrangements. Three B. cenocepacia transposon mutants that were found in a previous study to be impaired for survival in chronic lung infection model were mapped to the T6SS gene cluster, indicating that the T6SS is required for infection in vivo. Together, our data show that AtsR is involved in the regulation of genes required for virulence in B. cenocepacia K56-2, including genes encoding a T6SS.

Magnetisation of 2.6T in Gadolinium Thin Films

There is renewed interest in rare-earth elements and gadolinium in particular for a range of studies in coupling physics and applications. However, it is still apparent that synthesis impacts understanding of the intrinsic magnetic properties of thin gadolinium films, particularly for thicknesses of topicality. We report studies on 50nm thick nanogranular polycrystalline gadolinium thin films on SiO2 wafers that demonstrate single-crystal like behavior. The maximum in-plane saturation magnetization at 4K was found to be 4pMS4K = (2.61±0.26)T with a coercivity of HC4K = (160±5)Oe. A maximum Curie point of TC = (293±2)K was measured via zero-field-cooled - field-cooled magnetization measurements in close agreement with values reported in bulk single crystals. Our measurements revealed magnetic transitions at T1 = (12±2)K (as deposited samples) and T2 = (22±2)K (depositions on heated substrates) possibly arising from the interaction of paramagnetic fcc grains with their ferromagnetic hcp counterparts.

Realizing a high magnetic moment in Gd/Cr/FeCo: The role of the rare earth

The search for materials or systems exhibiting a high magnetic saturation has been of longstanding importance. It has been suggested that increased saturation could be achieved by coupling a transition metal via a spacer to a rare earth. We report Gd/Cr/Fe₇₀Co₃₀ multilayer stacks and find reduced yet modulating magnetic moment as a function of Cr thickness. Through a micro structural analysis the lowered moment is indicated by the nucleation of the ultrathin Gd films into an fcc phase. We discuss the possible solution in terms of quasi-perfect lattice match seed material to promote growth of hcp Gd.

Influence of strain and polycrystalline ordering on magnetic properties of high moment rare earth metals and alloys

Despite being the most suitable candidates for solenoid pole pieces in state-of-the-art superconductor- based electromagnets, the intrinsic magnetic properties of heavy rare earth metals and their alloys have gained comparatively little attention. With the potential of integration in micro- and nanoscale devices, thin films of Gd, Dy, Tb, DyGd and DyTb were plasma-sputtered and investigated for their in-plane magnetic properties, with an emphasis on magnetisation vs. temperature profiles. Based on crystal structure analysis of the polycrystalline rare earth films, which consist of a low magnetic moment FCC layer at the seed interface topped with a higher moment HCP layer, an experimental protocol is introduced which allows the direct magnetic analysis of the individual layers. In line with the general trend of heavy lanthanides, the saturation magnetisation was found to drop with increasing unit cell size. In-situ annealed rare earth films exceeded the saturation magnetisation of a high-moment Fe65Co35 reference film in the cryogenic temperature regime, proving their potential for pole piece applications; however as-deposited rare earth films were found completely unsuitable. In agreement with theoretical predictions, sufficiently strained crystal phases of Tb and Dy did not exhibit an incommensurate magnetic order, unlike their single-crystal counterparts which have a helical phase. DyGd and DyTb alloys followed the trends of the elemental rare earth metals in terms of crystal structure and magnetic properties. Inter-rare-earth alloys hence present a desirable blend of saturation magnetisation and operating temperature.

Development of a continuing professional development website to raise awareness of preconception counselling and pre-pregnancy care for Women with Diabetes

Aims: Pre-pregnancy care reduces the risk of adverse pregnancy outcomes in women with diabetes, yet the majority of women receive suboptimal care due to poor preconception counselling rates and a lack of awareness about the importance of specialised pre-pregnancy care. The primary aim was to develop a continuing professional development (CPD) resource for healthcare professionals (HCPs) who work with women with diabetes to facilitate preconception counselling with this group.

Methods: The website was developed under the direction of a multidisciplinary team, adhering to NICE guidelines. The tone, key messages and format are informed by the “Women with Diabetes” preconception counselling website, www.womenwithdiabetes.net, an existing resource which is effective in helping women to be better prepared for pregnancy.Results: This e-learning resource will give HCPs the necessary knowledge and tools to prepare women with diabetes to plan for pregnancy. The website features women with diabetes sharing their views and experiences, alongside an evidence-based commentary and key messages from research papers and clinical guidelines. It comprises two modules: “Planning for Pregnancy”, focusing on contraception, risks and planning; and “Diabetes and Pregnancy”, focusing on support during pregnancy with an overview of each trimester of pregnancy.

Conclusion: This website will be a useful CPD resource for all HCPs working with women with diabetes, providing a certificate on completion. This resource will empower HCPs to engage in preconception counselling with women with diabetes by providing the HCP with a greater understanding of the specific needs of women with diabetes both preconception and during pregnancy.

A density functional theory study of CO and atomic oxygen chemisorption on Pt(111)

Ab initio total energy calculations within a density functional theory framework have been performed for CO and atomic oxygen chemisorbed on the Pt(111) surface. Optimised geometries and chemisorption energies for CO and O on four high-symmetry sites, namely the top, bridge, fee hollow and hcp hollow sites, are presented, the coverage in all cases being 0.25 ML. The differences in CO adsorption energies between these sites are found to be small, suggesting that the potential energy surface for CO diffusion across Pt(111) is relatively flat. The 5 sigma and 2 pi molecular orbitals of CO are found to contribute to bonding with the metal. Some mixing of the 4 sigma and 1 pi molecular orbitals with metal states is also observed. For atomic oxygen, the most stable adsorption site is found to be the fee hollow site, followed in decreasing order of stability by the hcp hollow and bridge sites, with the top site being the least stable. The differences in chemisorption energies between sites for oxygen are larger than in the case of CO, suggesting a higher barrier to diffusion for atomic oxygen. The co-adsorption of CO and O has also been investigated. Calculated chemisorption energies for CO on an O/fcc-precovered surface show that of the available chemisorption sites, the top site at the oxygen atom's next-nearest neighbour surface metal atom is the most stable, with the other four sites calculated bring at least 0.29 eV less stable. The trend of CO site stability in the coadsorption system is explained in terms of a 'bonding competition' model. (C) 2000 Elsevier Science B.V. All rights reserved.

A density functional theory study of CO oxidation on Ru(0001) at low coverage

We have performed ab initio density functional theory calculations with the generalized gradient approximation to investigate CO oxidation on Ru(0001). Several reaction pathways and transition states are identified. A much higher reaction barrier compared to that on Pt(111) is determined, confirming that the Ru is very inactive for CO oxidation under UHV conditions. The origin of the reaction barrier was analyzed. It is found that in the transition state the chemisorbed O atom sits in an unfavorable bonding site and a significant competition for bonding with the same substrate atoms occurs between the CO and the chemisorbed O, resulting in the high barrier. Ab initio molecular dynamics calculations show that the activation of the chemisorbed O atom from the initial hcp hollow site (the most stable site) to the bridge site is the crucial step for the reaction. The CO oxidation on Ru(0001) via the Eley-Rideal mechanism has also been investigated. A comparison with previous theoretical work has been made. (C) 2000 American Institute of Physics. [S0021-9606(00)31223-5].

A first principles study of CH3 dehydrogenation on Ni(111)

Density functional theory with gradient corrections and spin polarization has been used to study the dehydrogenation of CH3 on Ni(111), a crucial step in many important catalytic reactions. The reaction, CH3(ads)--> CH2(ads)+H-(ads), is about 0.5 eV endothermic with an activation energy of more than 1 eV. The overall reaction pathway is rather intriguing. The C moiety translates from a hcp to a fcc site during the course of the reaction. The transition state of the reaction has been identified. The CH3 species is highly distorted, and both C and the active H are centered nearly on top of a row of Ni atoms with a long C-H bond length of 1.80 Angstrom. The local density of states coupled with examination of the real space distribution of individual quantum states has been used to analyze the reaction pathway. (C) 2000 American Institute of Physics. [S0021-9606(00)30218-5].

A density functional theory study of CH2 and H adsorption on Ni(111)

Ab initio total energy calculations within the density functional theory framework have been used to study the adsorption of CH2 and H as well as the coadsorption of CH2 and H on Ni(111). H binds strongly at threefold hollow sites with calculated adsorption energies of 2.60 and 2.54 eV at the face-centered-cubic (fcc) and hexagonal-close-packed (hcp) hollow sites, respectively. Adsorption energies and H-Ni distances are found to agree well with both experimental and theoretical results. CH2 adsorbs strongly at all high symmetry sites with calculated adsorption energies of 3.26, 3.22, 3.14 and 2.36 eV at the fcc, hcp, bridge and top sites, respectively. Optimized structures are reported at all sites, and, in the most stable hollow sites there is considerable internal reorganization of the CH2 fragment. The CH2 molecule is tilted, the hydrogens are inequivalent and the C-H bonds are lengthened relative to the gas phase. In the CH2-H coadsorption systems the adsorbates have a tendency to move toward bridge sites. The bonding of all adsorbates to the surface is analyzed in detail. (C) 2000 American Institute of Physics. [S0021-9606(00)71213-X].

Methyl chemisorption on Ni(111) and C-H-M multicentre bonding:a density functional theory study

Density functional theory has been used to study the adsorption of CH3 on Ni(111). CH3 is found to adsorb strongly at all four high symmetry sites of the Ni(111) surface. Calculated adsorption energies of CH3 on the different sites are in the following order: hcp approximate to fcc>bridge>top. The bonding and structures of CH3 on the different sites are analysed in detail. An important factor, namely three-centre bonding between carbon, hydrogen and nickel which contributes to the 'soft' C-H vibrational frequency of CH3 on Ni(111), and may determine the preferred chemisorption site, is stressed. (C) 1999 Elsevier Science B.V. All rights reserved.

Establishing a population-based patient-reported outcomes study (PROMs) using national cancer registries across two jurisdictions: The Prostate Cancer Treatment, your experience (PiCTure) study

Objective: To establish an international patient-reported outcomes (PROMs) study among prostate cancer survivors, up to 18 years postdiagnosis, in two countries with different healthcare systems and ethical frameworks. Design: A cross-sectional, postal survey of prostate cancer survivors sampled and recruited via two population-based cancer registries. Healthcare professionals (HCPs) evaluated patients for eligibility to participate. Questionnaires contained validated instruments to assess health-related quality of life and psychological well-being, including QLQ-C30, QLQPR-25, EQ-5D-5L, 21-question Depression, Anxiety and Stress Scale (DASS-21) and the Decisional Regret Scale. Setting: Republic of Ireland (RoI) and Northern Ireland (NI). Primary outcome measures: Registration completeness, predictors of eligibility and response, data missingness, unweighted and weighted PROMs. Results: Prostate cancer registration was 80% (95% CI 75% to 84%) and 91% (95% CI 89% to 93%) complete 2 years postdiagnosis in NI and RoI, respectively. Of 12 322 survivors sampled from registries, 53% (n=6559) were classified as eligible following HCP screening. In the multivariate analysis, significant predictors of eligibility were: being ≤59 years of age at diagnosis (p<0.001), short-term survivor (<5 years postdiagnosis; p<0.001) and from RoI (p<0.001). 3348 completed the questionnaire, yielding a 54% adjusted response rate. 13% of men or their families called the study freephone with queries for assistance with questionnaire completion or to talk about their experience. Significant predictors of response in multivariate analysis were: being ≤59 years at diagnosis (p<0.001) and from RoI (p=0.016). Mean number of missing questions in validated instruments ranged from 0.12 (SD 0.71; EQ-5D-5L) to 3.72 (SD 6.30; QLQ-PR25). Weighted and unweighted mean EQ-5D-5L, QLQ-C30 and QLQ-PR25 scores were similar, as were the weighted and unweighted prevalences of depression, anxiety and distress. Conclusions: It was feasible to perform PROMs studies across jurisdictions, using cancer registries as sampling frames; we amassed one of the largest, international, population-based data set of prostate cancer survivors. We highlight improvements which could inform future PROMs studies, including utilising general practitioners to assess eligibility and providing a freephone service.

Defining the content and delivery of an intervention to Change AdhereNce to treatment in BonchiEctasis (CAN-BE): a qualitative approach incorporating the Theoretical Domains Framework, behavioural change techniques and stakeholder expert panels

Background
Low patient adherence to treatment is associated with poorer health outcomes in bronchiectasis. We sought to use the Theoretical Domains Framework (TDF) (a framework derived from 33 psychological theories) and behavioural change techniques (BCTs) to define the content of an intervention to change patients’ adherence in bronchiectasis (Stage 1 and 2) and stakeholder expert panels to define its delivery (Stage 3).

Methods
We conducted semi-structured interviews with patients with bronchiectasis about barriers and motivators to adherence to treatment and focus groups or interviews with bronchiectasis healthcare professionals (HCPs) about their ability to change patients’ adherence to treatment. We coded these data to the 12 domain TDF to identify relevant domains for patients and HCPs (Stage 1). Three researchers independently mapped relevant domains for patients and HCPs to a list of 35 BCTs to identify two lists (patient and HCP) of potential BCTs for inclusion (Stage 2). We presented these lists to three expert panels (two with patients and one with HCPs/academics from across the UK). We asked panels who the intervention should target, who should deliver it, at what intensity, in what format and setting, and using which outcome measures (Stage 3).

Results
Eight TDF domains were perceived to influence patients’ and HCPs’ behaviours: Knowledge, Skills, Beliefs about capability, Beliefs about consequences, Motivation, Social influences, Behavioural regulation and Nature of behaviours (Stage 1). Twelve BCTs common to patients and HCPs were included in the intervention: Monitoring, Self-monitoring, Feedback, Action planning, Problem solving, Persuasive communication, Goal/target specified:behaviour/outcome, Information regarding behaviour/outcome, Role play, Social support and Cognitive restructuring (Stage 2). Participants thought that an individualised combination of these BCTs should be delivered to all patients, by a member of staff, over several one-to-one and/or group visits in secondary care. Efficacy should be measured using pulmonary exacerbations, hospital admissions and quality of life (Stage 3).

Conclusions
Twelve BCTs form the intervention content. An individualised selection from these 12 BCTs will be delivered to all patients over several face-to-face visits in secondary care. Future research should focus on developing physical materials to aid delivery of the intervention prior to feasibility and pilot testing. If effective, this intervention may improve adherence and health outcomes for those with bronchiectasis in the future.