12 resultados para Fig Wasps
em QUB Research Portal - Research Directory and Institutional Repository for Queen's University Belfast
Resumo:
This note presents a simple model for prediction of liquid hold-up in two-phase horizontal pipe flow for the stratified roll wave (St+RW) flow regime. Liquid hold-up data for horizontal two-phase pipe flow [1, 2, 3, 4, 5 and 6] exhibit a steady increase with liquid velocity and a more dramatic fall with increasing gas rate as shown by Hand et al. [7 and 8] for example. In addition the liquid hold-up is reported to show an additional variation with pipe diameter. Generally, if the initial liquid rate for the no-gas flow condition gives a liquid height below the pipe centre line, the flow patterns pass successively through the stratified (St), stratified ripple (St+R), stratified roll wave, film plus droplet (F+D) and finally the annular (A+D, A+RW, A+BTS) regimes as the gas rate is increased. Hand et al. [7 and 8] have given a detailed description of this progression in flow regime development and definitions of the patterns involved. Despite the fact that there are over one hundred models which have been developed to predict liquid hold-up, none have been shown to be universally useful, while only a handful have proven to be applicable to specific flow regimes [9, 10, 11 and 12]. One of the most intractable regimes to predict has been the stratified roll wave pattern where the liquid hold-up shows the most dramatic change with gas flow rate. It has been suggested that the momentum balance-type models, which give both hold-up and pressure drop prediction, can predict universally for all flow regimes but particularly in the case of the difficult stratified roll wave pattern. Donnelly [1] recently demonstrated that the momentum balance models experienced some difficulties in the prediction of this regime. Without going into lengthy details, these models differ in the assumed friction factor or shear stress on the surfaces within the pipe particularly at the liquid–gas interface. The Baker–Jardine model [13] when tested against the 0.0454 m i.d. data of Nguyen [2] exhibited a wide scatter for both liquid hold-up and pressure drop as shown in Fig. 1. The Andritsos–Hanratty model [14] gave better prediction of pressure drop but a wide scatter for liquid hold-up estimation (cf. Fig. 2) when tested against the 0.0935 m i.d. data of Hand [5]. The Spedding–Hand model [15], shown in Fig. 3 against the data of Hand [5], gave improved performance but was still unsatisfactory with the prediction of hold-up for stratified-type flows. The MARS model of Grolman [6] gave better prediction of hold-up (cf. Fig. 4) but deterioration in the estimation of pressure drop when tested against the data of Nguyen [2]. Thus no method is available that will accurately predict liquid hold-up across the whole range of flow patterns but particularly for the stratified plus roll wavy regime. The position is particularly unfortunate since the stratified-type regimes are perhaps the most predominant pattern found in multiphase lines.
Resumo:
Insects of the order Hymenoptera are biologically and economically important members of natural and agro ecosystems and exhibit diverse biologies, mating systems, and sex pheromones. We review what is known of their sex pheromone chemistry and function, paying particular emphasis to the Hymenoptera Aculeata (primarily ants, bees, and sphecid and vespid wasps), and provide a framework for the functional classification of their sex pheromones. Sex pheromones often comprise multicomponent blends derived from numerous exocrine tissues, including the cuticle. However, very few sex pheromones have been definitively characterized using bioassays, in part because of the behavioral sophistication of many Aculeata. The relative importance of species isolation versus sexual selection in shaping sex pheromone evolution is still unclear. Many species appear to discriminate among mates at the level of individual or kin/colony, and they use antiaphrodisiacs. Some orchids use hymenopteran sex pheromones to dupe males into performing pseudocopulation, with extreme species specificity.
Resumo:
The origin of eusociality is often regarded as a change of macroevolutionary proportions [1, 2]. Its hallmark is a reproductive division of labor between the members of a society: some individuals ("helpers" or "workers") forfeit their own reproduction to rear offspring of others ("queens"). In the Hymenoptera (ants, bees, wasps), there have been many transitions in both directions between solitary nesting and sociality [2-5]. How have such transitions occurred? One possibility is that multiple transitions represent repeated evolutionary gains and losses of the traits underpinning sociality. A second possibility, however, is that once sociality has evolved, subsequent transitions represent selection at just one or a small number of loci controlling developmental switches between preexisting alternative phenotypes [2, 6]. We might then expect transitional populations that can express either sociality or solitary nesting, depending on environmental conditions. Here, we use field transplants to directly induce transitions in British and Irish populations of the sweat bee Halictus rubicundus. Individual variation in social phenotype was linked to time available for offspring production, and to the genetic benefits of sociality, suggesting that helping was not simply misplaced parental care [7]. We thereby demonstrate that sociality itself can be truly plastic in a hymenopteran.
Resumo:
Brown algae (Phaeophyceae) are complex photosynthetic organisms with a very different evolutionary history to green plants, to which they are only distantly related(1). These seaweeds are the dominant species in rocky coastal ecosystems and they exhibit many interesting adaptations to these, often harsh, environments. Brown algae are also one of only a small number of eukaryotic lineages that have evolved complex multicellularity (Fig. 1). We report the 214 million base pair (Mbp) genome sequence of the filamentous seaweed Ectocarpus siliculosus (Dillwyn) Lyngbye, a model organism for brown algae(2-5), closely related to the kelps(6,7) (Fig. 1). Genome features such as the presence of an extended set of light-harvesting and pigment biosynthesis genes and new metabolic processes such as halide metabolism help explain the ability of this organism to cope with the highly variable tidal environment. The evolution of multicellularity in this lineage is correlated with the presence of a rich array of signal transduction genes. Of particular interest is the presence of a family of receptor kinases, as the independent evolution of related molecules has been linked with the emergence of multicellularity in both the animal and green plant lineages. The Ectocarpus genome sequence represents an important step towards developing this organism as a model species, providing the possibility to combine genomic and genetic(2) approaches to explore these and other(4,5) aspects of brown algal biology further.
Resumo:
This practice review examines Berlin–Brandenburg’s new strategic spatial planning framework and considers, in particular, whether balanced development in this context is now simply a neoliberal fig leaf and mantra acting as policy cover for more pragmatic accommodations in harsh times. The article concludes that such a judgement would be too harsh with the concept continuing to mould creative engagement by decision-makers.
Resumo:
Architecture plays an important role in Andrei Tarkovsky’s films in defining the atmosphere of a space and memory of a place. This paper is a study of how the settings in Tarkovsky’s Solaris (1972) are used to provoke and convey feelings to the audience through architectonic space depicting the city, library, home and aspects of the home such as paintings and mirrors. The rooms depicted in Solaris (Fig. 1) are filled with symbolism and detail. They are imbued with a poetic quality rarely seen in cinema. The everyday places of city, library and home in Solaris are given an emotional depth not usually found in these spaces in reality. Solaris is an anomaly among Tarkovsky’s films in that the majority of the narrative takes place in an enclosed built set. Rarely do Tarkovsky spaces exert so much control over the actors’ movements within a meticulously designed and detailed set. This paper analyses how the director uses constructed sets in Solaris to confront our perception of memories, dreams and reality.
The intent of this study is to gain better understanding of the link between architecture and other art forms such as painting and cinema through spatial analysis. This study also relates to our imagination and how we perceive architectonic space portrayed through cinematic images. The architectural theory of Juhani Pallasmaa forms the basis of this paper.
Resumo:
Analysis of molecular interaction and conformational dynamics of biomolecules is of paramount importance in understanding of their vital functions in complex biological systems, disease detection, and new drug development. Plasmonic biosensors based upon surface plasmon resonance and localized surface plasmon resonance have become the predominant workhorse for detecting accumulated biomass caused by molecular binding events. However, unlike surface-enhanced Raman spectroscopy (SERS), the plasmonic biosensors indeed are not suitable tools to interrogate vibrational signatures of conformational transitions required for biomolecules to interact. Here, we show that plasmonic metamaterials can offer two transducing channels for parallel acquisition of optical transmission and sensitive SERS spectra at the biointerface, simultaneously probing the conformational states and binding affinity of biomolecules, e.g. G-quadruplexes, in different environments (Fig. 1). We further demonstrate the use of the metamaterials for fingerprinting and detection of arginine-glycine-glycine domain of nucleolin, a cancer biomarker which specifically binds to a G-quadruplex, with the picomolar sensitivity. The dual-mode nanosensor will significantly contribute to unraveling the complexes of the conformational dynamics of biomolecules as well as to improving specificity of biodetection assays.
Resumo:
MOLECULES that perform logic operations are prerequisites for molecular information processing and computation. We and others have previously reported receptor molecules that can be considered to perform simple logic operations by coupling ionic bonding or more complex molecular-recognition processes with photonic (fluorescence) signals: in these systems, chemical binding (the 'input') results in a change in fluorescence intensity (the 'output') from the receptor. Here we describe a receptor (molecule (1) in Fig. 1) that operates as a logic device with two input channels: the fluorescence signal depends on whether the molecule binds hydrogen ions, sodium ions or both. The input/output characteristics of this molecular device correspond to those of an AND gate.
Resumo:
A 25 year old man was brought into the emergency
department by ambulance. He was involved in a road
traffic incident and had an obvious site of blood loss from
a fracture of an upper limb. On his arrival at the
emergency department, you are told that the ambulance
paramedic was unable to gain intravenous access and
are asked by the person in charge of resuscitation to try
to gain access. You are unable to find any peripheral
veins because he is hypovolemic. You attempt to put in a
central line via the femoral vein (fig 1).
Resumo:
Performance data for a dye based, regenerable oxygen sensor (Mills and Lawrie [1], Mills et al. [2]) are analyzed to develop useful kinetic models for sensor photoactivation (dye reduction) and dark, oxygen detection (dye oxidation). The titania loaded, thin film sensor exhibits an apparent first order photoactivation of the dye, which we demonstrate (Section 3.2 and Fig. 4) is due to a kinetic disguise of a zero order photoreaction occurring through a non-uniformly illuminated sensor film. The observed zero order, slow recovery due to dye oxidation by dioxygen (O2 detection) appears best rationalized by a model assuming a near O2-impermeable skin developing on the sensor surface as solvent is evaporatively removed following sensor film casting and curing.