Self-potential and spectral induced polarization signals associated with microbial sulphate reduction

Self-potential and spectral induced polarization responses associated with microbial processes involved in sulphate reduction have been monitored in a Perspex Winogradsky column filled with glass beads and growth medium. Salt-bridge is utilized as an electrolytic contact between experiment and control column. Equally spaced SP electrodes are used in combination of Ag-AgCl electrodes to compare electrodic and SP signals associated with the microbial processes involved in sulphate reduction. This study reveals that magnitude of SP varies from 5 to -2 mV and Electrodic potential 0 to -20 mV at the time of domination (day 39) of sulphate reducing bacteria which are very small in comparison to those measured by fixing both measuring and reference Ag-AgCl electrodes in experiment column. We observed that real and imaginary parts of complex conductivities increase with increase in production of H2S and CO in the experiment column. Both real and imaginary parts of surface complex conductivity vary at low frequencies similar to typical growth curve of bacterial population. Sodium lactate as a carbon source, dissolved in Lagan River water was flushed into the column for biostimulation on 144th day. The dissolved oxygen in flushed fluid might have killed the anaerobes in the column and decrease in complex conductivities similar to death phase of bacteria is observed for one week. The results obtained from this experiment should contribute to further understanding the biogeophysical responses involved in complex environments.


Read More: http://library.seg.org/doi/abs/10.1190/segj092009-001.57

Printability of calcium phosphate: Calcium sulphate powders for the application of tissue engineered bone scaffolds using the 3D printing technique

In this study, calcium phosphate (CaP) powders were blended with a three-dimensional printing (3DP) calcium sulfate (CaSO4)-based powder and the resulting composite powders were printed with a water-based binder using the 3DP technology. Application of a water-based binder ensured the manufacture of CaP:CaSO4 constructs on a reliable and repeatable basis, without long term damage of the printhead. Printability of CaP:CaSO4 powders was quantitatively assessed by investigating the key 3DP process parameters, i.e. in-process powder bed packing, drop penetration behavior and the quality of printed solid constructs. Effects of particle size, CaP:CaSO4 ratio and CaP powder type on the 3DP process were considered. The drop penetration technique was used to reliably identify powder formulations that could be potentially used for the application of tissue engineered bone scaffolds using the 3DP technique. Significant improvements (p < 0.05) in the 3DP process parameters were found for CaP (30-110 μm):CaSO4 powders compared to CaP (< 20 μm):CaSO4 powders. Higher compressive strength was obtained for the powders with the higher CaP:CaSO4 ratio. Hydroxyapatite (HA):CaSO4 powders showed better results than beta-tricalcium phosphate (β-TCP):CaSO4 powders. Solid and porous constructs were manufactured using the 3DP technique from the optimized CaP:CaSO4 powder formulations. High-quality printed constructs were manufactured, which exhibited appropriate green compressive strength and a high level of printing accuracy.