Dynamically mechanical and nano-impact (fatigue) analysis of touch screen thin films deposited on polyethylene terephthalate substrate

Nano-scale touch screen thin film have not been thoroughly investigated in terms of dynamic impact analysis under various strain rates. This research is focused on two different thin films, Zinc Oxide (ZnO) film and Indium Tin Oxide (ITO) film, deposited on Polyethylene Terephthalate (PET) substrate for the standard touch screen panels. Dynamic Mechanical Analysis (DMA) was performed on the ZnO film coated PET substrates. Nano-impact (fatigue) testing was performed on ITO film coated PET substrates. Other analysis includes hardness and the elastic modulus measurements, atomic force microscopy (AFM), Fourier Transform Infrared Spectroscopy (FTIR) and the Scanning Electron Microscopy (SEM) of the film surface.
Ten delta of DMA is described as the ratio of loss modulus (viscous properties) and storage modulus (elastic properties) of the material and its peak against time identifies the glass transition temperature (Tg). Thus, in essence the Tg recognizes changes from glassy to rubber state of the material and for our sample ZnO film, Tg was found as 388.3 K. The DMA results also showed that the Ten delta curve for Tg increases monotonically in the viscoelastic state (before Tg) and decreases sharply in the rubber state (after Tg) until recrystallization of ZnO takes place. This led to an interpretation that enhanced ductility can be achieved by negating the strength of the material.
For the nano-impact testing using the ITO coated PET, the damage started with the crack initiation and propagation. The interpretation of the nano-impact results depended on the characteristics of the loading history. Under the nano-impact loading, the surface structure of ITO film suffered from several forms of failure damages that range from deformation to catastrophic failures. It is concluded that in such type of application, the films should have low residual stress to prevent deformation, good adhesive strength, durable and good resistance to wear.

SPHERE: Stormont Parliamentary Hansards: Embedded in Research and Education

SPHERE (Stormont Parliamentary Hansards: Embedded in Research and Education) was a JISC-funded project based at King’s College, London and Queen’s University, Belfast, working in Partnership with the Northern Ireland Assembly Library, and the NIA Official Report (Hansard). Its purpose was to assess the use, value and impact of The Stormont Papers digital resource, and to use the results of this assessment to make recommendations for a series of practical approaches to embed the resource within teaching, learning and research among the wider user community. The project began in November 2010 and was concluded in April 2010.

A series of formal reports on the project are published by JISC online at http://www.jisc.ac.uk/whatwedo/programmes/digitisation/impactembedding/sphere.aspx

SPHERE Impact analysis summary
Portable Document Format
SPHERE interviews report
SPHERE Outreach use case
SPHERE research use case
SPHERE teaching use_case
SPHERE web survey report
SPHERE web analysis

What is the Point of Copyright History?:Reflections on Copyright at Common law in 1774 by H. Tomás Gómez-Arostegui

Copyright history has long been a subject of intense and contested enquiry. Historical narratives about the early development of copyright were first prominently mobilised in eighteenth century British legal discourse, during the so-called Battle of the Booksellers between Scottish and London publishers. The two landmark copyright decisions of that time – Millar v. Taylor (1769) and Donaldson v. Becket (1774) – continue to provoke debate today. The orthodox reading of Millar and Donaldson presents copyright as a natural proprietary right at common law inherent in authors. Revisionist accounts dispute that traditional analysis. These conflicting perspectives have, once again, become the subject of critical scrutiny with the publication of Copyright at Common Law in 1774 by Prof Tomas Gomez-Arostegui in 2014, in the Connecticut Law Review ((2014) 47 Conn. L. Rev. 1) and as a CREATe Working Paper (No. 2014/16, 3 November 2014).

Taking Prof Gomez-Arostegui’s extraordinary work in this area as a point of departure, Dr Elena Cooper and Professor Ronan Deazley (then both academics at CREATe) organised an event, held at the University of Glasgow on 26th and 27th March 2015, to consider the interplay between copyright history and contemporary copyright policy. Is Donaldson still relevant, and, if so, why? What justificatory goals are served by historical investigation, and what might be learned from the history of the history of copyright? Does the study of copyright history still have any currency within an evidence-based policy context that is increasingly preoccupied with economic impact analysis?

This paper provides a lasting record of these discussions, including an editorial introduction, written comments by each of the panelists and Prof. Gomez-Arostegui and an edited transcript of the Symposium debate.

Impact of sample preparation on mineralogical analysis of iron reactive barrier materials

Permeable reactive barriers (PRBs) of zero-valent iron (Fe0) are increasingly being used to remediate contaminated ground water. Corrosion of Fe0 filings and the formation of precipitates can occur when the PRB material comes in contact with ground water and may reduce the lifespan and effectiveness of the barrier. At present, there are no routine procedures for preparing and analyzing the mineral precipitates from Fe0 PRB material. These procedures are needed because mineralogical composition of corrosion products used to interpret the barrier processes can change with iron oxidation and sample preparation. The objectives of this study were (i) to investigate a method of preparing Fe0 reactive barrier material for mineralogical analysis by X-ray diffraction (XRD), and (ii) to identify Fe mineral phases and rates of transformations induced by different mineralogical preparation techniques. Materials from an in situ Fe0 PRB were collected by undisturbed coring and processed for XRD analysis after different times since sampling for three size fractions and by various drying treatments. We found that whole-sample preparation for analysis was necessary because mineral precipitates occurred within the PRB material in different size fractions of the samples. Green rusts quickly disappeared from acetone-dried samples and were not present in air-dried and oven-dried samples. Maghemite/magnetite content increased over time and in oven-dried samples, especially after heating to 105°C. We conclude that care must be taken during sample preparation of Fe0 PRB material, especially for detection of green rusts, to ensure accurate identification of minerals present within the barrier system.