Microstructure and Mechanical Propertiesof a Nitride-Strengthened Reduced ActivationFerritic/Martensitic Steel

Nitride-strengthened reduced activation ferritic/martensitic (RAFM) steels are developed taking advantage of the high thermal stability of nitrides. In the current study, the microstructure and mechanical properties of a nitride-strengthened RAFM steel with improved composition were investigated. Fully martensitic microstructure with fine nitrides dispersion was achieved in the steel. In all, 1.4 pct Mn is sufficient to suppress delta ferrite and assure the steel of the full martensitic microstructure. Compared to Eurofer97, the steel showed similar strength at room temperature but higher strength at 873 K (600 °C). The steel exhibited very high impact toughness and a low ductile-to-brittle transition temperature (DBTT) of 243 K (–30 °C), which could be further reduced by purification.

Multiple proton translocation in biomolecular systems: concerted to stepwise transition in a simple model

In this paper we study a simple model potential energy surface (PES) useful for describing multiple proton translocation mechanisms. The approach presented is relevant to the study of more complex biomolecular systems like enzymes. In this model, at low temperatures, proton tunnelling favours a concerted proton transport mechanism, while at higher temperatures there is a crossover from concerted to stepwise mechanisms; the crossover temperature depends on the energetic features of the PES. We illustrate these ideas by calculating the crossover temperature using energies taken from ab initio calculations on specific systems. Interestingly, typical crossover temperatures lie around room temperature; thus both concerted and stepwise reaction mechanisms should play an important role in biological systems, and one can be easily turned into another by external means such as modifying the temperature or the pH, thus establishing a general mechanism for modulation of the biomolecular function by external effectors.

Role of Delta Np63 gamma in Epithelial to Mesenchymal Transition

Although members of the p63 family of transcription factors are known for their role in the development and differentiation of epithelial surfaces, their function in cancer is less clear. Here, we show that depletion of the Delta Np63 alpha and beta isoforms, leaving only Delta Np63 gamma, results in epithelial to mesenchymal transition (EMT) in the normal breast cell line MCF10A. EMT can be rescued by the expression of the Delta Np63 alpha isoform. We also show that Delta Np63 gamma expressed in a background where all the other Delta Np63 are knocked down causes EMT with an increase in TGF beta-1, -2, and -3 and downstream effectors Smads2/3/4. In addition, a p63 binding site in intron 1 of TGF beta was identified. Inhibition of the TGF beta response with a specific inhibitor results in reversion of EMT in Delta Np63 alpha- and beta-depleted cells. In summary, we show that p63 is involved in inhibiting EMT and reduction of certain p63 isoforms may be important in the development of epithelial cancers.

Waveguide-to-microstrip transition at G-band using elevated E-plane probe

A rectangular waveguide-to-microstrip transition operating at G-band is presented. The E-plane probe, used in the transition, is fabricated on semi-insulating gallium arsenide (SI-GaAs) and it is elevated on the substrate. This configuration reduces interaction with semiconductor material. The elevated probe is suitable for direct integration with monolithic microwave integrated circuits. Measured results show S11 better than 210dB between 150 and 200 GHz and S21 ¼ 2 4dB at centre band (180GHz) for two transitions in back-to-back configuration.

Decay of Cystalline Order and Equilibration during the Solid-to-Plasma Transition Induced by 20-fs Microfocused 92-eV Free-Electron-Laser Pulses

We have studied a solid-to-plasma transition by irradiating Al foils with the FLASH free electron laser at intensities up to 10(16) W/cm(2). Intense XUV self-emission shows spectral features that are consistent with emission from regions of high density, which go beyond single inner-shell photoionization of solids. Characteristic features of intrashell transitions allowed us to identify Auger heating of the electrons in the conduction band occurring immediately after the absorption of the XUV laser energy as the dominant mechanism. A simple model of a multicharge state inverse Auger effect is proposed to explain the target emission when the conduction band at solid density becomes more atomiclike as energy is transferred from the electrons to the ions. This allows one to determine, independent of plasma simulations, the electron temperature and density just after the decay of crystalline order and to characterize the early time evolution.

Histone deacetylase 3 unconventional splicing mediates endothelial-to- mesenchymal transition through transforming growth factor β2

Histone deacetylase 3 (HDAC3) plays a critical role in the maintenance of endothelial integrity and other physiological processes. In this study, we demonstrated that HDAC3 undergoes unconventional splicing during stem cell differentiation. Four different splicing variants have been identified, designated as HD3α, -β, -γ, and -Δ, respectively. HD3α was confirmed in stem cell differentiation by specific antibody against the sequences from intron 12. Immunofluorescence staining indicated that the HD3α isoform co-localized with CD31-positive or α-smooth muscle actin-positive cells at different developmental stages of mouse embryos. Overexpression of HD3α reprogrammed human aortic endothelial cells into mesenchymal cells featuring an endothelial-to-mesenchymal transition (EndMT) phenotype. HD3α directly interacts with HDAC3 and Akt1 and selectively activates transforming growth factor β2 (TGFβ2) secretion and cleavage. TGFβ2 functioned as an autocrine and/or paracrine EndMT factor. The HD3α-induced EndMT was both PI3K/Akt- and TGFβ2-dependent. This study provides the first evidence of the role of HDAC3 splicing in the maintenance of endothelial integrity.

SMAD inhibition attenuates epithelial to mesenchymal transition by primary keratinocytes in vitro

Epithelial to mesenchymal transition (EMT) is a process whereby epithelial cells undergo transition to a mesenchymal phenotype and contribute directly to fibrotic disease. Recent studies support a role for EMT in cutaneous fibrotic diseases including scleroderma and hypertrophic scarring, though there is limited data on the cytokines and signalling mechanisms regulating cutaneous EMT. We investigated the ability of TGF-β and TNF-α, both over-expressed in cutaneous scleroderma and central mediators of EMT in other epithelial cell types, to induce EMT in primary keratinocytes and studied the signalling mechanisms regulating this process. TGF-β induced EMT in normal human epidermal keratinocytes (NHEK cells) and this process was enhanced by TNF-α. EMT was characterised by changes in morphology, proteome (down-regulation of E-cadherin and Zo-1, and up-regulation of vimentin and fibronectin), MMP secretion and COL1α1 mRNA expression. TGF-β and TNF-α in combination activated SMAD and p38 signalling in NHEK cells. P38 inhibition with SB203580 partially attenuated EMT, whereas SMAD inhibition using SB431542 significantly inhibited EMT and also reversed established EMT. These data highlight the retained plasticity of adult keratinocytes and support further studies of EMT in clinically relevant in vivo models of cutaneous fibrosis, and investigation of SMAD inhibition as a potential therapeutic intervention. This article is protected by copyright. All rights reserved.

Modelling Transition Due to Backward Facing Steps Using the Laminar Kinetic Energy Concept

Boundary layer transition estimation and modelling is essential for the design of many engineering products across many industries. In this paper, the Reynolds-averaged Navier–Stokes are solved in conjunction with three additional transport equations to model and predict boundary layer transition. The transition model (referred to as the kTkT–kLkL–ωω model) is based on the kk–ωω framework with an additional transport equation to incorporate the effects low-frequency flow oscillations in the form of a laminar kinetic energy (kLkL). Firstly, a number of rectifications are made to the original kTkT–kLkL–ωω framework in order to ensure an appropriate response to the free-stream turbulence level and to improve near wall predictions. Additionally, the model is extended to incorporate the capability to model transition due to surface irregularities in the form of backward-facing steps with maximum non-dimensional step sizes of approximately 1.5 times the local displacement thickness of the boundary layer where the irregularity is located (i.e k/δ∗⪅1.5k/δ∗⪅1.5) at upstream turbulence intensities in the range 0.01<Tu(%)<0.80.01<Tu(%)<0.8. A novel function is proposed to incorporate transition sensitivity due to aft-facing steps. This paper details the rationale behind the development of this new function and demonstrates its suitability for transition onset estimation on a flat plate at zero pressure gradient.

A realist literature review of transition to adult services by young people with life-limiting conditions in ireland.

Background As a result of improvements in care and treatment more young people with life-limiting conditions are now living beyond childhood, meaning they must make the transition from children's to adult services. The loss of long-standing relationships with providers of children's services combines with poor co-ordination of services to make this a daunting prospect for young people and their families. However, there is little evidence on transition services for young people with life limiting conditions, with few models of good practice in the literature.


Aims The purpose of this review was to determine the factors that promote or hinder the transition to adult services for young adults with life limiting conditions, and identify gaps to be addressed.


Methods A comprehensive search of the literature was undertaken using key terms, of the following databases; MEDLINE and the Cochrane Database of Systematic Reviews. 314 articles were sourced and inclusion and exclusion criteria were applied to highlight the most relevant literature.


Results Studies were reviewed using a realist review approach and three themes emerged from the literature. Barriers and facilitators to the transition process were identified associated with: 1. The patient 2. Parents/carers 3. The organisation.


Conclusion It is unclear from the literature what the specific factors are that promote or hinder the transition process for young adults with life limiting conditions who go through the transition from children's to adult services, therefore, research is required to identify the factors that promote and hinder the transition process in Ireland. This research is currently being carried out by the author as part of Doctoral studies. The three year full time Doctoral study commenced in January 2013 and is funded by the All Ireland Institute of Hospice and Palliative Care.

Transition from Children’s to Adult Services forYoung People with Life-limiting Conditions: Findings from a Questionnaire Survey in Northern Ireland

Research aims: 
To describe service provision for the transition from children’s to adult services for young people with life-limiting conditions in Northern Ireland, and to identify organisational factors that promote or inhibit effective transition. 
Study population: 
Health, social, educational and charitable organisations providing transition services to young people with life-limiting conditions in Northern Ireland. 
Study design and methods: 
A questionnaire has been developed by the research team drawing on examples from the literature and the advice of an expert advisory group. The questionnaire was piloted with clinicians,academics and researchers in June 2013. The questionnaire focuses on components of practice which may promote continuity in the transition from child to adult care for young people with a life-limiting condition. The survey will be distributed throughout Northern Ireland to an estimated 75 organisations, following the Dillman total design survey method. Numerical data will be analysed using PASW Statistical software to generate descriptive statistics along with a thematic analysis of data generated by open-ended questions. 
Results and interpretations: 
The survey will provide a description of services, transition policies, approaches to managing transition, categories of service users, the ages at which transition starts and completes, experiences with minority ethnic groups, the input of service users to the process, organisational factors promoting or hindering effective transition, links between services, and service providers’ recommendations for improvements in services.The outcomes will be an overview of the transition services currently provided in Northern Ireland identifying models of good practice and the key factors influencing the quality, safety and continuity of care. Survey results are due early in 2014.

The impact toughness of a nitride-strengthened martensitic heat resistant steel

The nitride-strengthened martensitic heat resistant steel is precipitation strengthened only by nitrides. In the present work, the effect of nitride precipitation behavior on the impact toughness of an experimental steel was investigated. Nitrides could hardly be observed when the steel was tempered at 650°C. When the tempering temperature was increased to 700°C and 750°C, a large amount of nitrides were observed in the matrix. It was surprising to reveal that the impact energy of the half-size samples greatly increased from several Joules to nearly a hundred Joules. The ductile-brittle transition temperature (DBTT) was also discovered to decrease from room temperature to −50°C when the tempering temperature was increased from 650°C to 750°C. The nitride precipitation with increasing tempering temperature was revealed to be responsible for the improved impact toughness.

Science learning in the outdoors to support primary-secondary transition

This study provides additional insight into how outdoor learning can be used as a vehicle to address transition issues. This study analyses the benefits of outdoor learning through the use of shared learning days with young people in the primary-secondary transition phase. This paper argues that a carefully designed programme of outdoor ‘shared learning days’ with young people in both phases working together is a sound model to help address the recommendations arising from specific transition issues (Mullan, 2014; Rose, 2009) through the delivery of aligned outcomes (cognitive, affective, interpersonal/social and physical/behavioural) and impact from learning science outdoors (Rickinson et al., 2004).

Precipitation, microstructure and mechanical properties of low nickel maraging steel

A maraging steel with a composition of Fe–12·94Ni–1·61Al–1·01Mo–0·23Nb (wt-%) was investigated. Optical, scanning electron and transmission electron microscopy and X-ray diffraction analysis were employed to study the microstructure of the steel after different aging periods at temperatures of 450–600°C. Hardness and Charpy impact toughness of the steel were measured. The study of microstructure and mechanical properties showed that nanosized precipitates were formed homogeneously during the aging process, which resulted in high hardness. As the aging time is prolonged, precipitates grow and hardness increases. Fractography of the as forged steel has shown mixed ductile and brittle fracture and has indicated that the steel has good toughness. Relationships among heat treatment, microstructure and mechanical properties are discussed. Further experiments using tensile testing and impact testing for aged steel were carried out.