Evaluating the quality of learning in Computer Supported Co-operative Learning

Can learning quality be maintained in the face of increasing class size by the use of Computer Supported Co-operative Learning (CSCL) technologies? In particular, can Computer-Mediated Communication promote critical thinking in addition to surface information transfer? We compared face-to-face seminars with asynchronous computer conferencing in the same Information Management class. From Garrison's theory of critical thinking and Henri's critical reasoning skills, we developed two ways of evaluating critical thinking: a student questionnaire and a content analysis technique. We found evidence for critical thinking in both situations, with some subtle differences in learning style. This paper provides an overview of this work.

An experiment in group learning technology: evaluating critical thinking in face-to-face and computer-supported seminars

Can learning quality be maintained in the face of increasing class size by the use of Computer Supported Co-operative Learning (CSCL) technologies? In particular, can Computer-Mediated Communication promote critical thinking in addition to surface information transfer? We compared face-to-face seminars with asynchronous computer conferencing in the same Information Management class. From Garrison's theory of critical thinking and Henri's critical reasoning skills, we developed two ways of evaluating critical thinking: a student questionnaire and a content analysis technique. We found evidence for critical thinking in both situations, with some subtle differences in learning style. This paper provides an overview of this work.

A content analysis method to measure critical thinking in face-to-face and computer supported group learning

This paper gives a detailed account of the content analysis method developed at Queen's University Belfast to measure critical thinking during group learning, as used in our controlled comparisons between learning in face-to-face and computer conference seminars. From Garrison's 5 stages of critical thinking, and Henri's cognitive skills needed in CMC, we have developed two research instruments: a student questionnaire and this content analysis method. The content analysis relies on identifying, within transcripts, examples of indicators of obviously critical and obviously uncritical thinking, from which several critical thinking ratios can be calculated.

Differential Scanning Calorimetry Study and Computer Modeling of b a Phase Transformation in Ti-6Al-4V Alloy

The relationship between heat-treatment parameters and microstructure in titanium alloys has so far been mainly studied empirically, using characterization techniques such as microscopy. Calculation and modeling of the kinetics of phase transformation have not yet been widely used for these alloys. Differential scanning calorimetry (DSC) has been widely used for the study of a variety of phase transformations. There has been much work done on the calculation and modeling of the kinetics of phase transformations for different systems based on the results from DSC study. In the present work, the kinetics of the transformation in a Ti-6Al-4V titanium alloy were studied using DSC, at continuous cooling conditions with constant cooling rates of 5 °C, 10 °C, 20 °C, 30 °C, 40 °C, and 50 °C/min. The results from calorimetry were then used to trace and model the transformation kinetics in continuous cooling conditions. Based on suitably interpreted DSC results, continuous cooling–transformation (CCT) diagrams were calculated with lines of isotransformed fraction. The kinetics of transformation were modeled using the Johnson–Mehl–Avrami (JMA) theory and by applying the "concept of additivity." The JMA kinetic parameters were derived. Good agreement between the calculated and experimental transformed fractions is demonstrated. Using the derived kinetic parameters, the transformation in a Ti-6Al-4V alloy can be described for any cooling path and condition. An interpretation of the results from the point of view of activation energy for nucleation is also presented.

Children's Views on Children's Right to Work:Reflections from Belfast

The purpose of this article is to examine children’s attitudes regarding the right to work. The article is based on comments made by 245 15-year-old children on child employment and is supported by focus group interviews with 56 boys and 38 girls and tape-recorded interviews with 15 working pupils. One of most dominant themes to emerge from the data is children’s perception that they have a right to work. The article examines the legislation regarding child employment in Northern Ireland and the role of the state in determining the legislation. The author suggests that within this legislation, children are seen as vulnerable and in need of protection. Traditionally the protection of children in the workforce has been achieved by limiting the hours they can work and the occupations they can enter. Yet when children’s own views are taken into account, they move beyond the limits of protecting them through exclusion to suggesting frameworks whereby their protection may be achieved by empowering them within the labour market.

Emotion Recognition in Human-Computer Interaction

The authors are concerned with the development of computer systems that are capable of using information from faces and voices to recognise people's emotions in real-life situations. The paper addresses the nature of the challenges that lie ahead, and provides an assessment of the progress that has been made in the areas of signal processing and analysis techniques (with regard to speech and face), and the psychological and linguistic analyses of emotion. Ongoing developmental work by the authors in each of these areas is described.

An investigation of possible mechanisms of the water-gas shift reaction over a ZrO2-supported Pt catalyst

The present work investigates the reactivity of the surface species observable by in situ DRIFTS formed over a Pt/ZrO2 during the water-gas shift (WGS) reaction. A DRIFTS cell/mass spectrometer system was operated at the chemical steady state during isotopic transients to yield information about the true nature (i.e., main reaction intermediate or spectators) of adsorbates. Only carbonyl and formate species were observed by DRIFTS under reaction conditions; the surface coverage of carbonate species was negligible. Isotopic transient kinetic analyses revealed that formates exchanged uniformly according to a first-order law, suggesting that most formates observed by DRIFTS were of the same reactivity. In addition, the time scale of the exchange of the reaction product CO2 was significantly shorter than that of the surface formates. Therefore, a formate route based on the formates as detected by DRIFTS can be ruled out as the main reaction pathway in the present case. The number of precursors of the reaction product CO2 was smaller than the number of surface Pt atoms, suggesting that carbonyl species or some \

Gene selection by cooperative competition clustering

Clustering analysis of data from DNA microarray hybridization studies is an essential task for identifying biologically relevant groups of genes. Attribute cluster algorithm (ACA) has provided an attractive way to group and select meaningful genes. However, ACA needs much prior knowledge about the genes to set the number of clusters. In practical applications, if the number of clusters is misspecified, the performance of the ACA will deteriorate rapidly. In fact, it is a very demanding to do that because of our little knowledge. We propose the Cooperative Competition Cluster Algorithm (CCCA) in this paper. In the algorithm, we assume that both cooperation and competition exist simultaneously between clusters in the process of clustering. By using this principle of Cooperative Competition, the number of clusters can be found in the process of clustering. Experimental results on a synthetic and gene expression data are demonstrated. The results show that CCCA can choose the number of clusters automatically and get excellent performance with respect to other competing methods.

Steam reforming of model compounds and fast pyrolysis bio-oil on supported noble metal catalysts

The production of hydrogen by steam reforming of bio-oils obtained from the fast pyrolysis of biomass requires the development of efficient catalysts able to cope with the complex chemical nature of the reactant. The present work focuses on the use of noble metal-based catalysts for the steam reforming of a few model compounds and that of an actual bio-oil. The steam reforming of the model compounds was investigated in the temperature range 650-950 degrees C over Pt, Pd and Rh supported on alumina and a ceria-zirconia sample. The model compounds used were acetic acid, phenol, acetone and ethanol. The nature of the support appeared to play a significant role in the activity of these catalysts. The use of ceria-zirconia, a redox mixed oxide, lead to higher H-2 yields as compared to the case of the alumina-supported catalysts. The supported Rh and Pt catalysts were the most active for the steam reforming of these compounds, while Pd-based catalysts poorly performed. The activity of the promising Pt and Rh catalysts was also investigated for the steam reforming of a bio-oil obtained from beech wood fast pyrolysis. Temperatures close to, or higher than, 800 degrees C were required to achieve significant conversions to COx and H-2 (e.g., H-2 yields around 70%). The ceria-zirconia materials showed a higher activity than the corresponding alumina samples. A Pt/ceria-zirconia sample used for over 9 h showed essentially constant activity, while extensive carbonaceous deposits were observed on the quartz reactor walls from early time on stream. In the present case, no benefit was observed by adding a small amount of O-2 to the steam/bio-oil feed (autothermal reforming, ATR), probably partly due to the already high concentration of oxygen in the bio-oil composition. (c) 2005 Elsevier B.V. All rights reserved.

Accounting Undergraduates’ Perceptions of Cooperative Learning as a Model for Enhancing their Interpersonal and Communication Skills to Interface Successfully with Professional Accountancy Education and Training

To interface effectively with professional accountancy training, accounting educationalists should ensure that they turn out graduates who possess the interpersonal and communication skills required of today's accountant. Attainment of these skills is promoted by group work. However, little empirical evidence exists to help academics make an informed choice about which form of group learning enhances interpersonal and communication skills. This paper addresses this deficiency by comparing perceptions of skills enhancement between accounting students who experienced traditional or simple group learning and those who undertook cooperative learning. The findings reveal that the cooperative learning cohort perceived their learning experience to be significantly more effective at enhancing interpersonal and communication skills than that of the simple group learning cohort. This study provides evidence that cooperative learning is a more effective model for delivering interpersonal and communication skills than simple group learning, thereby creating a more successful interface between academic accounting and professional accountancy training.

Turbo channel estimation and equalisation for a superposition-based cooperative system

This study investigates the superposition-based cooperative transmission system. In this system, a key point is for the relay node to detect data transmitted from the source node. This issued was less considered in the existing literature as the channel is usually assumed to be flat fading and a priori known. In practice, however, the channel is not only a priori unknown but subject to frequency selective fading. Channel estimation is thus necessary. Of particular interest is the channel estimation at the relay node which imposes extra requirement for the system resources. The authors propose a novel turbo least-square channel estimator by exploring the superposition structure of the transmission data. The proposed channel estimator not only requires no pilot symbols but also has significantly better performance than the classic approach. The soft-in-soft-out minimum mean square error (MMSE) equaliser is also re-derived to match the superimposed data structure. Finally computer simulation results are shown to verify the proposed algorithm.