Electron impact excitation of Ar XVII

Energies for the lowest 49 levels among the 1s(2) and 1snl (n = 2-5) configurations of Ar XVII have been calculated using the GRASP code of Dyall et al. (1989, Comput. Phys. Comm., 55, 424). Additionally, radiative rates, oscillator strengths, and line strengths are calculated for all electric dipole (E1), magnetic dipole (M1), electric quadrupole (E2), and magnetic quadrupole (M2) transitions among these levels. Furthermore, collision strengths have also been calculated for all the 1176 transitions among the above 49 levels using the Dirac Atomic R-matrix Code (DARC) of Norrington & Grant (2005, Comput. Phys. Commun., in preparation), over a wide energy range up to 580 Ryd. Resonances have been resolved in the threshold region, and effective collision strengths have been obtained over a wide temperature range up to log T-e = 7.2 K. Comparisons are made with the limited results available in the literature, and the accuracy of the data is assessed. Our energy levels are estimated to be accurate to better than 0.1%, whereas results for other parameters are probably accurate to better than 20%.

Effective collision strengths for transitions among the 3s(2), 3s3p and 3p(2) configurations of Fe xv

Effective collision strengths for transitions among the ten energetically lowest fine-structure levels belonging to the (1s(2)2s(2)2p(6))3s(2), 3s3p and 3p(2) configurations of Fe xv have been calculated in the electron temperature range of 10(5)-10(7) K, using the recent Dirac atomic R-matrix code of Norrington and Grant. The results are compared with the other recently available independent Breit-Pauli R-matrix calculations of Eissner et al (Eissner W, Galavis M E, Mendoza C and Zeippen C J 1999 Astron. Astrophys. Suppl. 137 165) and Griffin et al (Griffin DC, Badnell N R, Pindzola M S and Shaw J A 1999 J. Phys. B: At. Mol. Opt. Phys. 32 2139, 4129). Large differences are observed for many transitions over almost the entire temperature range. These differences are analysed and discussed, and the accuracy of the calculations is assessed.

nero- a post-maximum supernova radiation transport code

The interpretation of supernova (SN) spectra is essential for deriving SN ejecta properties such as density and composition, which in turn can tell us about their progenitors and the explosion mechanism. A very large number of atomic processes are important for spectrum formation. Several tools for calculating SN spectra exist, but they mainly focus on the very early or late epochs. The intermediate phase, which requires a non-local thermodynamic equilibrium (NLTE) treatment of radiation transport has rarely been studied. In this paper, we present a new SN radiation transport code, nero, which can look at those epochs. All the atomic processes are treated in full NLTE, under a steady-state assumption. This is a valid approach between roughly 50 and 500days after the explosion depending on SN type. This covers the post-maximum photospheric and the early and the intermediate nebular phase. As a test, we compare nero to the radiation transport code of Jerkstrand, Fransson & Kozma and to the nebular code of Mazzali et al. All three codes have been developed independently and a comparison provides a valuable opportunity to investigate their reliability. Currently, nero is one-dimensional and can be used for predicting spectra of synthetic explosion models or for deriving SN properties by spectral modelling. To demonstrate this, we study the spectra of the 'normal' Type Ia supernova (SN Ia) 2005cf between 50 and 350 days after the explosion and identify most of the common SN Ia line features at post-maximum epochs. © 2011 The Authors Monthly Notices of the Royal Astronomical Society © 2011 RAS.

An Analysis of Soft Law Applicable to Humanitarian Assistance: Relative Normativity in Action?

There is limited binding international law specifically covering the provision of humanitarian assistance in response to natural and human-made disasters. Yet a variety of authoritative soft law texts have been developed in the past 20 years, including the UN Guiding Principles on Internal Displacement, the Red Cross Red Crescent Code of Conduct and the Sphere Project’s Humanitarian Charter and Minimum Standards in Disaster Response. While such ‘non-binding normative standards’ do not carry the weight of international law, they play an essential role in the provision of humanitarian assistance albeit subject to their limited enforceability vis-à-vis intended beneficiaries and to their voluntary application by humanitarian actors. Notwithstanding a lack of legal compulsion, certain non-binding normative standards may directly influence the actions of States and non-State actors, and so obtain a strongly persuasive character. Analysis of texts that influence the practice of humanitarian assistance advances our understanding of humanitarian principles and performance standards for disaster response. As the International Law Commission debates draft articles on the Protection of Persons in the Event of Disasters, such non-binding normative standards are crucial to the development of an internationally accepted legal framework to protect victims of disasters.

Optimal design of long-span steel portal frames using fabricated beams

This paper considers the optimal design of fabricated steel beams for long-span portal frames. The design optimisation takes into account ultimate as well as serviceability limit states, adopting deflection limits recommended by the Steel Construction Institute (SCI). Results for three benchmark frames demonstrate the efficiency of the optimisation methodology. A genetic algorithm (GA) was used to optimise the dimensions of the plates used for the columns, rafters and haunches. Discrete decision variables were adopted for the thickness of the steel plates and continuous variables for the breadth and depth of the plates. Strategies were developed to enhance the performance of the GA including solution space reduction and a hybrid initial population half of which is derived using Latin hypercube sampling. The results show that the proposed GA-based optimisation model generates optimal and near-optimal solutions consistently. A parametric study is then conducted on frames of different spans. A significant variation in weight between fabricated and conventional hot-rolled steel portal frames is shown; for a 50 m span frame, a 14–19% saving in weight was achieved. Furthermore, since Universal Beam sections in the UK come from a discrete section library, the results could also provide overall dimensions of other beams that could be more efficient for portal frames. Eurocode 3 was used for illustrative purposes; any alternative code of practice may be used.

Radiative rates for E1, E2, M1 and M2 transitions in Fe X

Energies of the 54 levels belonging to the (1s(2)2s(2)2p(6)) 3s(2)3p(5), 3s3p(6), 3s(2)3p(4)3d and 3s3p(5)3d configurations of Fe X have been calculated using the GRASP code of Dyall et al. (1989). Additionally, radiative rates, oscillator strengths, and line strengths are calculated for all electric dipole (E1), magnetic dipole (M1), electric quadrupole (E2), and magnetic quadrupole (M2) transitions among these levels. Comparisons are made with results available in the literature, and the accuracy of the data is assessed. Our energy levels are estimated to be accurate to better than 3%, whereas results for other parameters are probably accurate to better than 20%. Additionally, the agreement between measured and calculated lifetimes is better than 10%.

Radiative rates for transitions in Fe XVII

Energies of the lowest 157 levels belonging to the (1s(2)) 2s(2)2p(6), 2s(2)p(5)3l, 2s(2)2p(5)4l, 2s(2)2p(5)4l, 2s2p(5)5l, 2s2p(6)4l and 2s2p(6)5l configurations of Fe XVII have been calculated using the GRASP code of Dyall et al. (1989). Additionally, radiative rates, oscillator strengths, and line strengths are calculated for all electric dipole (E I), magnetic dipole (M I), electric quadrupole (E2), and magnetic quadrupole (M2) transitions among these levels. Comparisons are made with the results already available in the literature, and the accuracy of the data is assessed. Our energy levels are expected to be accurate to better than M whereas results for other parameters are probably accurate to better than 20%.

Energy levels, radiative rates, and collision strengths for transitions in Fe XVII

Energy levels and radiative rates have been calculated for fine-structure transitions among the lowest 89 levels of the (1s(2)) 2s(2)2p(6), 2s(2) 2p(5) 3 l, 2s(2) 2p(5) 4l, 2s2p(6) 3 l, and 2s2p(6)4l configurations of Fe XVII using the GRASP code of Dyall et al. Collision strengths have also been calculated, for transitions among the lowest 55 levels, using the recently developed Dirac atomic R-matrix code (DARC) of Norrington & Grant. The results are compared with those available in the literature, and the accuracy of the data is assessed.

Energy levels and radiative rates for transitions in Ar XIII, Ar XIV and Ar XV

Energies for 524 levels of Ar XIII, 460 levels of Ar XIV and 156 levels of Ar XV have been calculated using the GRASP code of Dyall et al. (1989). Additionally, radiative rates, oscillator strengths, and line strengths are calculated for all electric dipole (E1), magnetic dipole (M1), electric quadrupole (E2), and magnetic quadrupole (M2) transitions among these levels. Comparisons are made with the limited results available in the literature, and the accuracy of the data is assessed. Our energy levels are estimated to be accurate to better than 1%, whereas results for other parameters are probably accurate to better than 20%. Additionally, the level lifetimes derived from our radiative rates are in excellent agreement with measured values.

Reflexive Modernisation and Social Work in Ireland: A Response to Powell

The aim of this article is respond to some of the issues addressed by Powell (1998). It focuses on his consideration of the role and task of social work within a changing society. I argue that, before postulations about the future role of social work in Ireland can be made, consideration of its current nature and the form of its discourses are necessary. I then go on to critique Powell's analysis of social work in the context of concepts such as empowerment, participation and prevention and argue that, by failing to consider the necessarily regulatory and centralized nature of much of Irish social work currently, such an analysis remains merely rhetorical. Powell's reference to the Irish Association of Social Workers' Code of Ethics (1995) as evidence of social work entering a period of reflexive modernity is also examined. The article concludes with a call for a move away from utopian speculation within Irish social work discourse towards a more realistic and constructive analysis of both the future potential and the limitations of Irish social work, given its spatial and discursive constraints.

Attitudes and Ethics: Evaluating Knowledge and Regulatory Constructs in Planning Enforcement Practice

The departure point for the paper is the need to scrutinise previously unconsidered dimensions which are fundamental to understanding the dynamics of the planning enforcement system. Drawing upon emerging themes in regulation theory the paper fuses these with knowledge constructs. The rationale is that regulatory regimes must be informed by knowledge imparted from a range of sources and the resultant quality of decision making is inextricably linked to the robustness and completeness of the evidence base collated.
The theoretical analysis, coupled with proposed radical legislative changes, provides a lens for an empirical investigation which scrutinises tactics, strategies, operational mechanisms, attitudinal dimensions and ethics with a view to identifying key factors impacting upon enforcement efficacy. Prizes and pitfalls are identified in the course of the analysis and evaluation, with evidence-based remedies suggested where appropriate. The paper concludes by reflecting on the importance of theoretical synergy, epistemological advancement, taking cognisance of ethical and attitudinal challenges facing the planning profession; and, stresses the importance of identifying and bringing to book those who flagrantly breach the Code of Professional Conduct.

The International Regulatory Regime on Capital Flows

Capital controls and exchange restrictions are used to restrict international capital flows during economic crises. This paper looks at the legal implications of these restrictions and explores the current international regulatory framework applicable to international capital movements and current payments. It shows how international capital flows suffer from the lack of a comprehensive and coherent regulatory framework that would harmonize the patchwork of
multilateral, regional, and bilateral treaties that currently regulate this issue. These treaties include the Articles of Agreement of the International Monetary Fund (IMF Articles), the General Agreement on Trade in Services (GATS), free-trade agreements, the European Union treaty, bilateral investment treaties, and the Organization for Economic Co-operation and Development (OECD) Code of Liberalization of Capital Movements (OECD Code of Capital Movement). Each
of these instruments regulate differently capital movements with little coordination with other areas of law. This situation sometimes leads to regulatory overlaps and conflict between different sources of law. Given the strong links between capital movements and trade in services, this paper pays particular attention to the rules of the GATS on capital flows and discusses the policy space available in the GATS for restricting capital flows in times of crisis.