Preparation of highly stable oligo (ethylene glycol) derivatives-functionalized gold nanoparticles and their application in LSPR-Based detection of PSA/ACT complex

A sandwich immunoassay for PSA/ACT complex detection based on gold nanoparticle aggregation using two probes was developed. The functionalized colloidal gold nanoparticles (AuNPs) showed highly stable not only in the presence of high ionic strength but also in a wide pH range. The functionalized AuNPs were tagged with PSA/ACT complex monoclonal antibody and goat PSA polyclonal antibody and served as the probes to induce aggregation of the colloidal particles. As a result, PSA/ACT complex was detected at concentrations as low as 1 ng/ml. This is the first time that a new aggregation sandwich-immunoassay technique using two gold probes has been used, and the results are generally applicable to other LSPR-based immunoassays.

Preparation of Highly Stable OEG derivatives-functionalized AuNPs and Its Application in LSPR-based Detection of PSA/ACT Complex

The zero-length crosslinker EDC has been widely used to make amide bonds between carboxylic acid and amine groups for bioconjugation because no residues remain in the crosslinked protein. During the conjugation process, EDC activates the carboxyl groups (negatively charged) and forms an unstable amine-reactive intermediate (positively charged). However, the process turns to be a problematic issue if it is applied to modify carboxyl-functionalized and –stabilized Au nanoparticles (AuNPs) due to the fact that the negatively repulsive forces which help to stabilize the AuNPs were disrupted leading to the colloid aggregation. Therefore, to modify the negatively carboxyl-terminated AuNPs while their stability can be maintained yet, we assume that functionalization of the AuNPs using 02 kinds of negatively charged groups which one serves as a linking agent, and the other one plays a role of negative charge maintainer could overcome the impediment.

In this study, the colloidal gold nanoparticles were synthesized by Turkevitch’s method, and then their surface was rationally functionalized with different molar ratios of HS(CH2)11(OCH2CH2)6OCH2COOH and HS(CH2)11(OCH2CH2)3OH (OEG6-COOH/OEG3-OH) by self assembling technique. As a result, the most appropriate molar ratio was found to be 1:10, and the AuNP aggregation was prevented not only in the activation process by EDC but also in the present of high concentration of NaCl as well as over in a wide pH range. This is the first time that extremely stable OEG derivatives-functionalized Au nanoparticles for protein bioconjugation using EDC chemistry is reported, and the results open the door for covalent bioconjugation of AuNPs in biological applications.

Exploiting local controversy: regional British censorship of Last Tango in Paris (1972)

This article explores local authority responses to the cinematic release of Last Tango in Paris in Britain. Using a range of archival material from the BBFC, the National Archives and the Public Records Office of Northern Ireland, it offers a detailed, comparative case study of three different locations; Belfast, Newport and Oxford. It argues that comparing local censorship decisions with the national decisions of the BBFC offer little in the way of regional nuance. In order to effectively understand the workings of local censorship, a deeper understanding of local discourses is needed as well as acknowledgement of broader pressure group activity and its impact on the local picture, such as that of the National Festival of Light.

Commentary on Publication of Lectures Act 1835

Legislation conferring the exclusive right of printing and publishing certain lectures for the same term of protection provided by the existing copyright legislation (see: Statute of Anne, uk_1710; Copyright Act, uk_1814). This was the first occasion on which the legislature extended copyright protection to works in the oral form. The legislation is of interest in terms of the distinction it draws between lectures delivered within the 'public' and the 'private' spheres (lectures delivered at a University, for example, are not protected), in terms of articulating the nature of the relationship between a speaker and his audience, and in specifically clarifying that newspapers are similarly prohibited from reporting protected lectures. The commentary explores the background to the passing of the Act, and in particular the role which Henry Brougham played in proposing and securing the same.

Physicochemical Characterization of Poly(ethylene glycol) Plasticized Poly(methyl vinyl ether-co-maleic acid) Films

The influence of the poly(ethylene glycol) (PEG) plasticizer content and molecular weight on the physicochemical properties of films cast from aqueous blends of poly(methyl vinyl ether-co-maleic acid) (PMVE/MA) was investigated with tensile mechanical testing, thermal analysis, and attenuated total reflectance/Fourier transform infrared spectroscopy. Unplasticized films and those containing high copolymer contents were very difficult to handle and proved difficult to test. PEG with a molecular weight of 200 Da was the most efficient plasticizer. However, films cast from aqueous blends containing 10% (w/w) PMVE/MA and either PEG 1000 or PEG 10,000 when the copolymer/plasticizer ratio was 4 : 3 and those cast from aqueous blends containing 15% (w/w) PMVE/MA and either PEG 1000 or PEG 10,000 when the copolymer/plasticizer ratio was 2 : 1 possessed mechanical properties most closely mimicking those of a formulation we have used clinically in photodynamic therapy. Importantly, we found previously that films cast from aqueous blends containing 10% (w/w) PMVE/MA performed rather poorly in the clinical setting, where uptake of moisture from patients' skin led to reversion of the formulation to a thick gel. Consequently, we are now investigating films cast from aqueous blends containing 15% (w/w) PMVE/MA and either PEG 1000 or PEG 10,000, where the copolymer/plasticizer ratio is 2 : 1, as possible Food and Drug Administration approved replacements for our current formulation, which must currently be used only on a named patient basis as its plasticizer, tripropylene glycol methyl ether, is not currently available in pharmaceutical grade

A “very limited” effect or a “seismic” impact? A study of the impact of the Human Rights Act 1998 on the Courts of Northern Ireland

This article focuses on the question of what impact the Human Rights Act 1998 has had in practice on the courts of Northern Ireland. How frequently are human rights arguments made in the course of cases in this jurisdiction, and to what extent do such arguments affect outcomes of cases? In order to assess the impact of the Act, the use of the European Convention on Human Rights in the Northern Irish courts during four periods of time is examined. These are, firstly, prior to the passing of the Act in November 1998; secondly, between the Act’s passing and its coming into force in October 2000; thirdly, the first three years after the coming into force of the Act (October 2000 until October 2003); and fourthly, the three years between October 2006 and October 2009.

Property rights and competing for the affections of Demos: The Impact of the 1867 Reform Act on stock prices

The 1867 Reform Act in Britain extended the electoral franchise to the skilled but propertyless urban working classes. Using stock market data and exploiting the fact that foreign and domestic equities traded simultaneously on the London market, this paper finds that investors in British firms reacted negatively to the passage of this Act. We suggest that this finding is consistent with investors foreseeing future alterations of property rights arising from the pressure that the large newly enfranchised group would bring to bear on government policy. We also suggest that our findings appear to be more consistent with the Tory political competition explanation for the Act rather than the Whig threat-of-revolution explanation.

Clinical and cost-effectiveness of internal limiting membrane peeling for patients with idiopathic full thickness macular hole. Protocol for a Randomised Controlled Trial:FILMS (Full-thickness macular hole and Internal Limiting Membrane peeling Study)

Background: A full-thickness macular hole (FTMH) is a common retinal condition associated with impaired vision. Randomised controlled trials (RCTs) have demonstrated that surgery, by means of pars plana vitrectomy and post-operative intraocular tamponade with gas, is effective for stage 2, 3 and 4 FTMH. Internal limiting membrane (ILM) peeling has been introduced as an additional surgical manoeuvre to increase the success of the surgery; i.e. increase rates of hole closure and visual improvement. However, little robust evidence exists supporting the superiority of ILM peeling compared with no-peeling techniques. The purpose of FILMS (Full-thickness macular hole and Internal Limiting Membrane peeling Study) is to determine whether ILM peeling improves the visual function, the anatomical closure of FTMH, and the quality of life of patients affected by this disorder, and the cost-effectiveness of the surgery. Methods/Design: Patients with stage 2-3 idiopathic FTMH of less or equal than 18 months duration (based on symptoms reported by the participant) and with a visual acuity = 20/40 in the study eye will be enrolled in this FILMS from eight sites across the UK and Ireland. Participants will be randomised to receive combined cataract surgery (phacoemulsification and intraocular lens implantation) and pars plana vitrectomy with postoperative intraocular tamponade with gas, with or without ILM peeling. The primary outcome is distance visual acuity at 6 months. Secondary outcomes include distance visual acuity at 3 and 24 months, near visual acuity at 3, 6, and 24 months, contrast sensitivity at 6 months, reading speed at 6 months, anatomical closure of the macular hole at each time point (1, 3, 6, and 24 months), health related quality of life (HRQOL) at six months, costs to the health service and the participant, incremental costs per quality adjusted life year (QALY) and adverse events. Discussion: FILMS will provide high quality evidence onthe role of ILM peeling in FTMH surgery. © 2008 Lois et al; licensee BioMed Central Ltd.

Sub-nA spatially resolved conductivity profiling of surface and interface defects in ceria films

Spatial variability of conductivity in ceria is explored using scanning probe microscopy (SPM) with galvanostatic control. Ionically blocking electrodes are used to probe the conductivity under opposite polarities to reveal possible differences in the defect structure across a thin film of CeO2. Data suggests the existence of a large spatial inhomogeneity that could give rise to constant phase elements during standard electrochemical characterization, potentially affecting the overall conductivity of films on the macroscale. The approach discussed here can also be utilized for other mixed ionic electronic conductor (MIEC) systems including memristors and electroresistors, as well as physical systems such as ferroelectric tunneling barriers.

Initial growth stages of epitaxial BaTiO3 films on vicinal SrTiO3 (001) substrate surfaces

The initial growth mechanism of epitaxial BaTiO3 films is studied by combined application of atomic force microscopy, cross sectional high-resolution transmission electron microscopy, and x-ray diffraction. Epitaxial BaTiO3 thin films were grown by pulsed laser deposition on vicinal Nb-doped SrTiO3 (SrTiO3:Nb) (001) substrates with well-defined terraces. X-ray diffraction and cross sectional high-resolution transmission electron microscopy investigations revealed well-defined epitaxial films and a sharp interface between BaTiO3 films and SrTiO3:Nb substrates. The layer-then-island (Stranski-Krastanov mode) growth mechanism observed by analyzing the morphology of a sequence of films with increasing amount of deposited material has been confirmed by microstructure investigations. (C) 2002 American Institute of Physics.

Commentary on the Licensing Act 1662

Legislation prohibiting the publication of any literary work without prior licence.
Drawing upon both the Star Chamber Decree 1637 (uk_1637) and the Acts Regulating Printing during the Interregnum (see: uk_1643 and associated documents), the Licensing Act set out a comprehensive set of provisions concerning both the licensing of the press and the regulation and management of the book trade. In addition, it confirmed the rights of those holding printing privileges (or patents) granted in accordance with the royal prerogative (see for example: Day's privilege for The Cosmographical Glass (uk_1559b)) as well as those who had registered works with the Stationers' Company (uk_1557). It also introduced the first legal library deposit requirement. In force between 1662 and 1679, and then again between 1685 and 1695, the Act represents the last occasion on which the censorship of the press was formally and strategically linked to the protection of the economic interests of the Stationers' Company. Its lapse led the Stationers' Company to lobby parliament for renewed protection, ultimately resulting in the passing of the Statute of Anne 1710 (uk_1710).

Minimum Wage Regulation under Devolution in Northern Ireland

This paper assesses the development and functioning of regional minimum wage regulation in Northern Ireland in the interwar period under a federal form of devolution. Unlike current devolution arrangements in Scotland and Wales, this gave the Stormont Parliament powers over employment and minimum wage regulation. Northern Ireland Trade Boards were set up by the Ulster Unionist Government under the Trade Boards (Northern Ireland) Act 1923 and functioned along the same lines as those in Great Britain. Uniquely in the UK in this period, employer opposition resulted in the main Trade Board in the Irish Linen Industry being replaced by voluntary collective bargaining machinery. About one-quarter of employees were covered by minimum wage regulation, including two-thirds of females in Belfast, keeping a protective floor under low pay.

Experiences with mephedrone pre- and post-legislative controls: Perceptions of safety and sources of supply

Background: Drug scenes within several countries have changed in recent years to incorporate a range of licit psychoactive products, collectively known as “legal highs.” Hundreds of different legal high products have been described in the literature. Many of these products contain synthetic stimulants that allegedly
“mirror” the effects of some illicit drugs. In 2009–2010, growing concern by the UK and Irish governments focused on mephedrone, a synthetic stimulant that had become embedded within several drug scenes in Britain and Ireland. In April 2010, mephedrone and related cathinone derivatives were banned under
the UK’s Misuse of Drugs Act 1971. Setting aside “worse case scenarios” that have been portrayed by UK and Irish media, little is known about mephedrone use from the consumer’s perspective. The purpose of this paper was to (1) explore respondents’ experiences with mephedrone, (2) examine users’ perceptions
about the safety of mephedrone, and primarily to (3) examine sources of mephedrone supply during the pre- and post-ban periods.
Methods: Semi-structured interviews were conducted with 23 adults who had used mephedrone during 2009–2010. Data collection occurred in May and June 2010, following the ban on mephedrone. A total of 20/23 respondents had used mephedrone during the post-ban period, and the vast majority had prior
experience with ecstasy or cocaine. Respondents’ ages ranged from 19 to 51, approximately half of the sample were female and the majority (19 of 23) were employed in full- or part-time work.
Results: Most respondents reported positive experiences with mephedrone, and for some, the substance emerged as a drug of choice. None of the respondents reported that the once-legal status of mephedrone implied that it was safe to use. Very few respondents reported purchasing mephedrone from street-based
or on-line headshops during the pre-ban period, and these decisions were guided in part by respondents’ attempts to avoid “drug user” identities. Most respondents purchased or obtained mephedrone from friends or dealers, and mephedrone was widely available during the 10-week period following the ban. Respondents reported a greater reliance on dealers and a change in mephedrone packaging following the criminalisation of mephedrone.
Conclusion: The findings are discussed in the context of what appears to be a rapidly changing mephedrone market. We discuss the possible implications of criminalising mephedrone, including the potential displacement effects and the development of an illicit market.

Investigation of swelling and network parameters of poly (ethylene glycol)-crosslinked poly (methyl vinyl ether-co-maleic acid) hydrogels

he influence of poly(ethylene glycol) (PEG) plasticiser content and molecular weight on the physicochemical properties of films cast from aqueous blends of poly(methyl vinyl ether-co-maleic acid) was investigated using thermal analysis, swelling studies, scanning electron microscopy (SEM) and attenuated total reflectance (ATR)-Fourier transform infrared (FTIR) spectroscopy. FTIR spectroscopy revealed a shift of the CO peak from 1708 to 1731 cm-1, indicating that an esterification reaction had occurred upon heating, thus producing crosslinked films. Higher molecular weight PEGs (10,000 and 1000 Da, respectively), having greater chain length, producing hydrogel networks with lower crosslink densities and higher average molecular weight between two consecutive crosslinks. Accordingly, such materials exhibited higher swelling rates. Hydrogels crosslinked with a low molecular weight PEG (PEG 200) showed rigid networks with high crosslink densities and, therefore, lower swelling rates. Polymer:plasticizer ratio alteration did not yield any discernable patterns, regardless of the method of analysis. The polymer–water interaction parameter (?) increased with increases in the crosslink density. SEM studies showed that porosity of the crosslinked films increased with increasing PEG MW, confirming what had been observed with swelling studies and thermal analysis, that the crosslink density must be decreased as the Mw of the crosslinker is increased. Hydrogels containing PMVE/MA/PEG 10,000 could be used for rapid delivery of drug, due to their low crosslink density. Moderately crosslinked PMVE/MA/PEG 1000 hydrogels or highly crosslinked PMVE/MA/PEG 200 systems could then be used in controlling the drug delivery rates. We are currently evaluating these systems, both alone and in combination, for use in sustained release drug delivery devices.