Modulation of surface charge, particle size and morphological properties of chitosan-TPP nanoparticles intended for gene delivery

This work investigates the polyanion initiated gelation process in fabricating chitosan-TPP (tripolyphosphate) nanoparticles in the size range of 100-250 nm intended to be used as carriers for the delivery of gene or protein macromolecules. It demonstrates that ionic gelation of cationic chitosan molecules offers a flexible and easily controllable process for systematically and predictably manipulating particle size and surface charge which are important properties in determining gene transfection efficacy if the nanoparticles are used as non-viral vectors for gene delivery, or as delivery carriers for protein molecules. Variations in chitosan molecular weight, chitosan concentration, chitosan to TPP weight ratio and solution pH value were examined systematically for their effects on nanoparticle size, intensity of surface charge, and tendency of particle aggregation so as to enable speedy fabrication of chitosan nanoparticles with predetermined properties. The chitosan-TPP nanoparticles exhibited a high positive surface charge across a wide pH range, and the isoelectric point (IEP) of the nanoparticles was found to be at pH 9.0. Detailed imaging analysis of the particle morphology revealed that the nanoparticles possess typical shapes of polyhedrons (e.g., pentagon and hexagon), indicating a similar crystallisation mechanism during the particle formation and growth process. This study demonstrates that systematic design and modulation of the surface charge and particle size of chitosan-TPP nanoparticles can be readily achieved with the right control of critical processing parameters, especially the chitosan to TPP weight ratio. (c) 2005 Elsevier B.V. All rights reserved.

SERS enhancement by aggregated Au colloids: effect of particle size

Aggregated Au colloids have been widely used as SERS enhancing media for many years but to date there has been no systematic investigation of the effect of the particle size on the enhancements given by simple aggregated Au colloid solutions. Previous systematic studies on isolated particles in solution or multiple particles deposited onto surfaces reported widely different optimum particle sizes for the same excitation wavelength and also disagreed on the extent to which surface plasmon absorption spectra were a good predictor of enhancement factors. In this work the spectroscopic properties of a range of samples of monodisperse Au colloids with diameters ranging from 21 to 146 nm have been investigated in solution. The UV/visible absorption spectra of the colloids show complex changes as a function of aggregating salt (MgSO4) concentration which diminish when the colloid is fully aggregated. Under these conditions, the relative SERS enhancements provided by the variously sized colloids vary very significantly across the size range. The largest signals in the raw data are observed for 46 nm colloids but correction for the total surface area available to generate enhancement shows that particles with 74 nm diameter give the largest enhancement per unit surface area. The observed enhancements do not correlate with absorbance at the excitation wavelength but the large differences between differently sized colloids demonstrate that even in the randomly aggregated particle assemblies studied here, inhomogeneous broadening does not mask the underlying changes due to differences in particle diameter.

LDL particle size in habitual exercisers, lean sedentary men and abdominally obese sedentary men

Habitual exercisers enjoy considerable protection from coronary heart disease (CHD). Often, however, only modest differences in traditional CHD risk factors are apparent between habitual exercisers and their sedentary counterparts. For this reason, there is increasing interest in novel predictors of CHD, such as a preponderance of small, dense low-density lipoprotein (LDL) particles. Polyacrylamide gel electrophoresis was used to separate lipoprotein subfractions in 32 lean exercisers, 36 lean sedentary men and 21 obese sedentary men aged 30-45 years. Well-validated equations were used to determine LDL concentration and peak particle diameter. Waist girth was used to identify lean (<100 cm) and obese ( >= 100cm) individuals. LDL concentration was lower in lean exercisers than in lean sedentary men (2.64 +/- 0.44 vs. 3.76 +/- 0.79 mmol.l(-1), p <0.001), suggesting that habitual exercise influences this risk factor. In contrast, there were no significant differences in LDL peak particle diameter between lean exercisers, lean sedentary men and obese sedentary men (27.92 +/- 0.67, 28.09 +/- 0.62 and 27.77 +/- 0.77 nm, respectively). In multiple linear regression analysis, triglyceride concentration was the only significant predictor of LDL PPD. These data suggest that habitual exercise influences LDL concentration but does not influence LDL particle size in men aged 30-45 years.

Micro-abrasion-corrosion of cast CoCrMo-Effects of micron and sub-micron sized abrasives

The abrasion damage on retrieved CoCrMo based hip joints is reported to be influenced by the entrainment of micron and sub-micron sized debris/hard particles. This paper represents the first attempt to look into the effects of relatively soft abrasives with micron and sub-micron dimensions on the abrasion mechanisms and the abrasion-corrosion performance of the cast CoCrMo in simulated hip joint environments. A modified micro-abrasion tester incorporating a liquid tank and a three-electrode electrochemical cell was used. Al O (300 nm and 1 μm) and sub-micron sized BaSO abrasives were chosen as being comparable in the size and hardness to the wear particles found in vivo. Results show that the specific wear rates of cast CoCrMo are dependent on the abrasive particle size, hardness and volume concentration. Larger particle size, higher hardness and greater abrasive volume fractions gave greater wear rates. The wear-induced corrosion current generally increases with increasing wear rates, and the presence of proteins seems to suppress the wear-induced corrosion current especially when abrasive volume fractions were high. This study shows that the nature of abrasives and the test solutions are both important in determining the wear mechanisms and the abrasion-corrosion response of cast CoCrMo. These findings provide new and important insights into the in vivo wear mechanisms of CoCrMo. © 2009 Elsevier B.V. All rights reserved.

Reuse of construction waste: performance under repeated loading

The use of recycled aggregates has increased greatly over the last decade owing to enhanced environmental sensitivities. The level of performance required by such materials is dependent upon the applications for which they are used. Many recycled construction wastes have adequate shear strength in relation to various geotechnical applications. However, a possible drawback of these materials is the risk of crushing during repeated loading. The work reported in this paper examined two waste materials: crushed concrete and building debris, both regarded as construction wastes. Tests were also performed on traditionally used crushed rock, in this case basalt. The materials were subjected to repeated loading in a large direct shear apparatus. The amount of crushing was quantified by performing particle size analysis of the tested material. The results have shown that both recycled construction wastes were susceptible to particle crushing. The amount of crushing was influenced by both the vertical pressure and the number of loading cycles. This leads to a marked decrease in peak friction angle

Evaluation of a multi-functional nanocarrier for targeted breast cancer iNOS gene therapy.

The present study determines whether the novel designer biomimetic vector (DBV) can condense anddeliver the cytotoxic iNOS gene to breast cancer cells to achieve a therapeutic effect. We have previouslyshown the benefits of iNOS for cancer gene therapy but the stumbling block to future development hasbeen the delivery system.The DBV was expressed, purified and complexed with the iNOS gene. The particle size and chargewere determined via dynamic light scattering techniques. The toxicity of the DBV/iNOS nanoparticleswas quantified using the cell toxicity and clonogenic assays. Over expression of iNOS was confirmed viaWestern blotting and Griess test.The DBV delivery system fully condensed the iNOS gene with nanoparticles less than 100 nm. Transfectionwith the DBV/iNOS nanoparticles resulted in a maximum of 62% cell killing and less than 20%clonogenicity. INOS overexpression was confirmed and total nitrite levels were in the range of 18M.We report for the first time that the DBV can successfully deliver iNOS and achieve a therapeuticeffect. There is significant cytotoxicity coupled with evidence of a bystander effect. We concludethat the success of the DBV fusion protein in the delivery of iNOS in vitro is worthy of future in vivo experiments.

The effect of the binder size and viscosity on agglomerate growth in fluidised hot melt granulation

Fluidised hot melt granulation (FHMG) is a novel granulation technique for processing pharmaceutical powders. Several process and formulation parameters have been shown to significantly influence granulation characteristics within FHMG. In this study we have investigated the effect of the binder properties (binder particle size and binder viscosity) on agglomerate growth mechanisms within FHMG. Low-melting point co-polymers of polyoxyethylene–polyoxypropylene (Lutrol® F68 Poloxamer 188 and Lutrol® F127 Poloxamer 407) were used as meltable binders for FHMG, while standard ballotini beads were used as model fillers for this process. Standard sieve analysis was used to determine the size distribution of granules whereas we utilised fluorescence microscopy to investigate the distribution of binder within granules. This provided further insight into the growth mechanisms during FHMG. Binder particle size and viscosity were found to affect the onset time of granulation. Agglomerate growth achieved equilibrium within short time-scales and was shown to proceed by two competing processes, breakage of formed granules and re-agglomeration of fractured granules. Breakage was affected by the initial material properties (binder size and viscosity). When using binder with a small particle size (<250 µm), agglomerate growth via a distribution mechanism dominated. Increasing the binder particle size shifted the granulation mechanism such that agglomerates were formed predominantly via immersion. A critical ratio between binder diameter and filler has been calculated and this value may be useful for predicting or controlling granulation growth processes.

How Porosity and Permeability Vary Spatially With Grain Size, Sorting, Cement Volume, and Mineral Dissolution In Fluvial Triassic Sandstones: The Value of Geostatistics and Local Regression

Although it is well known that sandstone porosity and permeability are controlled by a range of parameters such as grain size and sorting, amount, type, and location of diagenetic cements, extent and type of compaction, and the generation of intergranular and intragranular secondary porosity, it is less constrained how these controlling parameters link up in rock volumes (within and between beds) and how they spatially interact to determine porosity and permeability. To address these unknowns, this study examined Triassic fluvial sandstone outcrops from the UK using field logging, probe permeametry of 200 points, and sampling at 100 points on a gridded rock surface. These field observations were supplemented by laser particle-size analysis, thin-section point-count analysis of primary and diagenetic mineralogy, quantitiative XRD mineral analysis, and SEM/EDAX analysis of all 100 samples. These data were analyzed using global regression, variography, kriging, conditional simulation, and geographically weighted regression to examine the spatial relationships between porosity and permeability and their potential controls. The results of bivariate analysis (global regression) of the entire outcrop dataset indicate only a weak correlation between both permeability porosity and their diagenetic and depositional controls and provide very limited information on the role of primary textural structures such as grain size and sorting. Subdividing the dataset further by bedding unit revealed details of more local controls on porosity and permeability. An alternative geostatistical approach combined with a local modelling technique (geographically weighted regression; GWR) subsequently was used to examine the spatial variability of porosity and permeability and their controls. The use of GWR does not require prior knowledge of divisions between bedding units, but the results from GWR broadly concur with results of regression analysis by bedding unit and provide much greater clarity of how porosity and permeability and their controls vary laterally and vertically. The close relationship between depositional lithofacies in each bed, diagenesis, and permeability, porosity demonstrates that each influences the other, and in turn how understanding of reservoir properties is enhanced by integration of paleoenvironmental reconstruction, stratigraphy, mineralogy, and geostatistics.

Structure-reactivity Correlations in the catalytic coupling of ethyne over novel bimetallic Pd/Sn catalysts

The structure, thermal stability, and catalytic behavior of a novel highly dispersed silica-supported Pd/Sn catalyst prepared by an organometallic route have been examined by X-ray photoelectron, X-ray diffraction, and X-ray absorption, fine structure spectroscopies, the latter two measurements being carried outwith an in situ reaction cell. Additional reactor measurements were performed on a more Sn-rich catalyst and on a pure Pd catalyst. Varying the temperature of reduction induced large variations in catalytic performance toward ethyne-coupling reactions. These changes are understandable in terms of the destruction of SnO2-like structures surrounding the Pd core, yielding a skin of metallic Sn which subsequently undergoes intermixing with Pd. The overall thermal and catalytic behavior of these highly dispersed materials accords well with the analogous single-crystal model system.

Strawberries decrease atherosclerotic markers in subjects with metabolic syndrome

Strawberries have been reported to be potent antioxidants and reduce cardiovascular risk factors, such as elevated blood pressure, hyperglycemia, dyslipidemia, and inflammation in limited studies. We hypothesized that freeze-dried strawberry supplementation will improve blood pressure, impaired glucose, dyslipidemia, or circulating adhesion molecules in obese subjects with metabolic syndrome, thereby lowering cardiovascular risk factors in these subjects. Twenty-seven subjects with metabolic syndrome (2 males and 25 females; body mass index, 37.5 +/- 2.15 kg/m(2); age, 47.0 +/- 3.0 years [means +/- SE]) consumed 4 cups of freeze-dried strawberry beverage (50 g freeze-dried strawberries approximately 3 cups fresh strawberries) or equivalent amounts of fluids (controls, 4 cups of water) daily for 8 weeks in a randomized controlled trial. Anthropometrics and blood pressure measurements, assessment of dietary intakes, and fasting blood draws were conducted at screen and 8 weeks of the study. Strawberry supplementation significantly decreased total and low-density lipoprotein cholesterol (5.8 +/- 0.2 to 5.2 +/- 0.2 mmol/L and 3.5 +/- 0.2 to 3.1 +/- 0.1 mmol/L, respectively [means +/- SE], P <.05) and small low-density lipoprotein particles using nuclear magnetic resonance-determined lipoprotein subclass profile vs controls at 8 weeks (794.6 +/- 94.0 to 681.8 +/- 86.0 nmol/L [means +/- SE], P <.05). Strawberry supplementation further decreased circulating levels of vascular cell adhesion molecule-1 vs controls at 8 weeks (272.7 +/- 17.4 to 223.0 +/- 14.0 ng/mL [means +/- SE], P <.05). Serum glucose, triglycerides, high-density lipoprotein cholesterol, blood pressure, and waist circumference were not affected. Thus, short-term freeze-dried strawberry supplementation improved selected atherosclerotic risk factors, including dyslipidemia and circulating adhesion molecules in subjects with metabolic syndrome, and these results need confirmation in future trials.

HDL-C and HDL-C/ApoA-I predict long-term progression of glycemia in established type 2 diabetes

OBJECTIVE: Low HDL cholesterol (HDL-C) and small HDL particle size may directly promote hyperglycemia. We evaluated associations of HDL-C, apolipoprotein A-I (apoA-I), and HDL-C/apoA-I with insulin secretion, insulin resistance, HbA1c, and long-term glycemic deterioration, reflected by initiation of pharmacologic glucose control.

RESEARCH DESIGN AND METHODS: The 5-year Fenofibrate Intervention and Event Lowering in Diabetes (FIELD) study followed 9,795 type 2 diabetic subjects. We calculated baseline associations of fasting HDL-C, apoA-I, and HDL-C/apoA-I with HbA1c and, in those not taking exogenous insulin (n = 8,271), with estimated β-cell function (homeostasis model assessment of β-cell function [HOMA-B]) and insulin resistance (HOMA-IR). Among the 2,608 subjects prescribed lifestyle only, Cox proportional hazards analysis evaluated associations of HDL-C, apoA-I, and HDL-C/apoA-I with subsequent initiation of oral hypoglycemic agents (OHAs) or insulin.

RESULTS: Adjusted for age and sex, baseline HDL-C, apoA-I, and HDL-C/apoA-I were inversely associated with HOMA-IR (r = -0.233, -0.134, and -0.230; all P < 0.001; n = 8,271) but not related to HbA1c (all P > 0.05; n = 9,795). ApoA-I was also inversely associated with HOMA-B (r = -0.063; P = 0.002; n = 8,271) adjusted for age, sex, and HOMA-IR. Prospectively, lower baseline HDL-C and HDL-C/apoA-I levels predicted greater uptake (per 1-SD lower: hazard ratio [HR] 1.13 [CI 1.07-1.19], P < 0.001; and HR 1.16 [CI 1.10-1.23], P < 0.001, respectively) and earlier uptake (median 12.9 and 24.0 months, respectively, for quartile 1 vs. quartile 4; both P < 0.01) of OHAs and insulin, with no difference in HbA1c thresholds for initiation (P = 0.87 and P = 0.81). Controlling for HOMA-IR and triglycerides lessened both associations, but HDL-C/apoA-I remained significant.

CONCLUSIONS: HDL-C, apoA-I, and HDL-C/apoA-I were associated with concurrent insulin resistance but not HbA1c. However, lower HDL-C and HDL-C/apoA-I predicted greater and earlier need for pharmacologic glucose control.

Characterisation of polyethylene powders for rotational moulding and effect of powder size and shape on densification behaviour

The particle size, shape and distribution of a range of rotational moulding polyethylenes (PEs) ground to powder was investigated using a novel visual data acquisition and analysis system (TP Picture®), developed by Total Petrochemicals. Differences in the individual particle shape factors of the powder samples were observed and correlations with the grinding conditions were determined. When heated, the bubble dissolution behaviour of the same powders was investigated and the shape factor correlated with densification rate, bubble size and bubble distribution.