Electric Vehicles - a well to wheel analysis

The European Union has set a target for 10% renewable energy in transport by 2020, which will be met using both biofuels and electric vehicles. In the case of biofuels, for the purposes of meeting the target, the biofuel must achieve greenhouse gas savings of 35% relative to the fossil fuel replaced. For biofuels, greenhouse gas savings can be calculated using life cycle analysis, or the European Union default values. In contrast, all electricity used in transport is considered to be the same, regardless of the source or the type of electric vehicle. However, the choice of the electric vehicle and electricity source will have a major impact on the greenhouse gas savings. This paper examines different electric-vehicle scenarios in terms of greenhouse gas savings, using a well-to-wheel life cycle analysis.

Why reinvent the wheel? A behaviour analyst's reflections on pedagogy for inclusion for students with intellectual and developmental disability

The number of children identified as having intellectual or developmental disability is rising worldwide and their education has been found wanting. It has been said that “they simply need better teaching.” At the same time, there is an increasing evidence base that pedagogy that is based on the discipline of behaviour analysis offers the best prospect for individuals diagnosed with autism spectrum disorders. On the basis of this evidence, it is proposed that behaviour analysis should be applied more broadly to improve teaching for all children with intellectual or developmental disability.

Reinventing a New Wheel: The Films of Norman Mailer

This article covers the connections between Norman Mailer's four films, as well as their influence on such film genres as mockumentary cinema.

Examining the presence of Arching-Action in Edge Stiffened Bridge Deck Cantilever Overhangs Subjected to a Wheel Load

Engineers have proposed the idea that there may be some arching action present in bridge deck cantilever overhangs stiffened along their longitudinal free edge, via a traffic barrier, subjected to a wheel load. This paper includes the details of a full-scale corrosion-free bridge deck with cantilever overhangs stiffened along their longitudinal free edge by a traffic barrier wall that has been constructed and tested under static and fatigue wheel loads at the University of Manitoba. It also reviews experimental test results and postulates various discussions that suggest the presence of arching-action in cantilever slab overhangs. Test results indicated static ultimate load capacities significantly greater than the ultimate capacity if the mode of failure and behavior of the cantilever overhang was completely flexural. These early results confirm and indicate the presence of arching-action resulting in a significant break-through in cantilever behavior when subjected to a wheel load. The theory to account for this arching-action is not yet developed and further research should be conducted.

A well-to-wheel analysis of electric vehicles in the all-island Single Electricity Market

The European Union has set a target for 10% renewable energy in transport by 2020 to be met using biofuels and electric vehicles. In the case of biofuels, the biofuel must achieve greenhouse gas savings of 35% relative to the fossil fuel replaced. For biofuels, greenhouse gas savings can be calculated using life cycle analysis or the European Union default values. In contrast, all electricity used in transport is considered to be the same, regardless of the source or the type of electric vehicle. However, the choice of the electric vehicle and electricity source will have a major impact on the greenhouse gas saving. In this paper the initial findings of a well-to-wheel analysis of electric vehicle deployment in Northern Ireland are presented. The key finding indicates that electric vehicles require least amount of energy per mile on a well-to-wheel basis, consume the fewest resources, even accommodating inefficient fuel production, in comparison to standard internal combustion engine and hybrid vehicles.

Testing of a novel flexible concrete arch system

This paper describes the testing of a novel flexible masonry concrete arch system which requires no centering in the construction phase or steel reinforcement in the long-term. The arch is constructed from a 'flat pack' system by use of a polymer reinforcement for supporting the self-weight of the concrete voussoirs and behaves as a masonry arch once in the arch form. The paper outlines the construction of a prototype arch and load testing of the backfilled arch ring. Some comparisons to the results from analysis software have been made. The arch had a load carrying capacity far in excess of the current Highways Agency (United Kingdom) design wheel loads.

Government Laws, Regulations and Policies: Small Fish in a Big Pond

Global development has, in recent years, been shaped by the rise of transnational capital. This has implications for the quality and effectiveness of those national laws, regulations and policies in place to monitor transnational capital, ensure that multi national organisations assume responsibility and hold them accountable should they fail to do so. In balancing these objectives, contrasting issues come to the fore, such as the fear of capital flight; an issue especially profound in small open economies where the balance may tip in the favour of retaining, as opposed to regulating, foreign capital.
This paper can be considered in three parts. First, the paper addresses the shift in global leadership from national governments to multinational corporations (with particular reference to the rise of the Transnational Capitalist Class). This shift will incorporate the connotations of the Third Way. In considering this ideology, it will propose the Third Way as a transition phase to a stage when government is more the “third wheel” than an equal partner in governance structures. Second, the implications of the changing nature of governance on the capacity of nation states to develop effective laws, regulations and policies is discussed which leads on to the third aspect of the paper which identifies the challenges for governments, business and society in reimagining the governance structure pertaining to law, regulation and policy and the need to reconsider existing structures in light of global shifts in power structures.
A new leadership structure, both within the national and international governance system has far reaching implications. Boundary constraints no longer an issue, the potential for equality and global democracy is huge. Instead, a post recessionary world faces new governance challenges in the shape of; legitimacy; accountability and responsibility. Capitalism has invaded government and the primary challenge will be in avoiding the same issues that have dogged our financial markets for the last number of years. The challenge then to laws, regulations and public policy is huge, especially considering that the governments regulating are smaller than those dictating agenda on a global level

Characterisation of pavement profile heights using accelerometer readings and a combinatorial optimisation technique

Pavement surface profiles induce dynamic ride responses in vehicles which can potentially be used to classify road surface roughness. A novel method is proposed for the characterisation of pavement roughness through an analysis of vehicle accelerations. A combinatorial optimisation technique is applied to the determination of pavement profile heights based on measured accelerations at and above the vehicle axle. Such an approach, using low-cost inertial sensors, would provide an inexpensive alternative to the costly laser-based profile measurement vehicles. The concept is numerically validated using a half-car roll dynamic model to infer measurements of road profiles in both the left and right wheel paths.

Efficient Network in Player and Partner Heterogeneity Models

This paper characterizes efficient networks in player and partner heterogeneity models for both the one-way flow and the two-way flow models. Player (partner) dependent network formation allows benefits and costs to be player (partner) heterogeneous which is an important extension for modeling social networks in the real world. Employing widely used assumptions, I show that efficient networks in the two way flow model are minimally connected and have star or derivative of star type architectures, whereas efficient networks in the one way flow model have wheel architectures.

Enabling ultra high precision on hard steels using surface defect machining

This paper is an extension to an idea coined during the 13th EUSPEN Conference (P6.23) named "surface defect machining" (SDM). The objective of this work was to demonstrate how a conventional CNC turret lathe can be used to obtain ultra high precision machined surface finish on hard steels without recourse to a sophisticated ultra precision machine tool. An AISI 4340 hard steel (69 HRC) workpiece was machined using a CBN cutting tool with and without SDM. Post-machining measurements by a Form Talysurf and a Scanning Electron Microscope (FEI Quanta 3D) revealed that SDM culminates to several key advantages (i) provides better quality of the machined surface integrity and offers (ii) lowering feed rate to 5μm/rev to obtain a machined surface roughness of 30 nm (optical quality).

Prediction of surface roughness during hard turning of AISI 4340 steel (69 HRC)

In this study, 39 sets of hard turning (HT) experimental trials were performed on a Mori-Seiki SL-25Y (4-axis) computer numerical controlled (CNC) lathe to study the effect of cutting parameters in influencing the machined surface roughness. In all the trials, AISI 4340 steel workpiece (hardened up to 69 HRC) was machined with a commercially available CBN insert (Warren Tooling Limited, UK) under dry conditions. The surface topography of the machined samples was examined by using a white light interferometer and a reconfirmation of measurement was done using a Form Talysurf. The machining outcome was used as an input to develop various regression models to predict the average machined surface roughness on this material. Three regression models - Multiple regression, Random Forest, and Quantile regression were applied to the experimental outcomes. To the best of the authors’ knowledge, this paper is the first to apply Random Forest or Quantile regression techniques to the machining domain. The performance of these models was compared to each other to ascertain how feed, depth of cut, and spindle speed affect surface roughness and finally to obtain a mathematical equation correlating these variables. It was concluded that the random forest regression model is a superior choice over multiple regression models for prediction of surface roughness during machining of AISI 4340 steel (69 HRC).