High Percentage Inorganic Arsenic Content of Mining Impacted and Nonimpacted Chinese Rice

Two approaches were undertaken to characterize the arsenic (As) content of Chinese rice. First, a national market basket survey (n = 240) was conducted in provincial capitals, sourcing grain from China's premier rice production areas. Second, to reflect rural diets, paddy rice (n = 195) directly from farmers fields were collected from three regions in Hunan, a key rice producing province located in southern China. Two of the sites were within mining and smeltery districts, and the third was devoid of large-scale metal processing industries. Arsenic levels were determined in all the samples while a subset (n = 33) were characterized for As species, using a new simple and rapid extraction method suitable for use with Hamilton PRP-X100 anion exchange columns and HPLC-ICP-MS. The vast majority (85%) of the market rice grains possessed total As levels <150 ng g(-1). The rice collected from mine-impacted regions, however, were found to be highly enriched in As, reaching concentrations of up to 624 ng g(-1). Inorganic As (As(i)) was the predominant species detected in all of the speciated grain, with As(i) levels in some samples exceeding 300 ng g(-1). The As(i) concentration in polished and unpolished Chinese rice was successfully predicted from total As levels. The mean baseline concentrations for As(i) in Chinese market rice based on this survey were estimated to be 96 ng g(-1) while levels in mine-impacted areas were higher with ca. 50% of the rice in one region predicted to fail the national standard.

Numerical modelling of laboratory tests for TBM cutter indentation process analysis

Considering that TBMs are nowadays used for long Trans-Alpine tunnels, the
understanding of rock breaking and chipping due to TBM cutter disks mechanism, for deep tunnelling operations, becomes very interesting. In this paper, the results from carried out laboratory tests that simulate the disk cutter action at the rock tunnel face by means of an indentation tool, acting on a rock
specimen with proper size, and the related three-dimensional and two-dimensional numerical modelling are proposed. The developed numerical models simulate the different test conditions (applied load, boundary conditions) allowing the analysis of the stresses distributions along possible breaking planes.
The influence of a confinement-free area on one side of the specimen, simulating the formation of a groove near the tool, is pointed out.
The obtained results from numerical modelling put in evidence a satisfactory agreement with the experimental observations.

Confined site construction: An empirical analysis of factors impacting health and safety management

Purpose – The purpose of this paper is to identify, clarify and tabulate the various managerial issues encountered, to aid in the management of the complex health and safety concerns which occur within a confined construction site environment.

Design/methodology/approach – This is achieved through conducting extensive qualitative and qualitative research in the form of case studies, interviews and questionnaire survey.

Findings – The leading managerial issues in the management of health and safety on a confined construction site are found to be: “Difficulty to move materials around site safely”; “Lack of adequate room for the effective handling of materials”; “Difficulty in ensuring site is tidy and all plant and materials are stored safely”; “Close proximity of individuals to operation of large plant and machinery”; and joint fifth “Difficulty in ensuring proper arrangement and collection of waste materials on-site” along with “Difficulty in controlling hazardous materials and equipment on site”.

Practical implications – The resulting implication for practice of these results can be summarised by identifying that with sustained development of urban centres on a global scale, coupled with the increasing complexity of architectural designs, the majority of on-site project management professionals are faced with the onerous task of completing often intricate designs within a limited spatial environment, under strict health and safety parameters.

Originality/value – The subsequent value of the findings are such that just as on-site management professionals successfully identify the various managerial issues highlighted, the successful management of health and safety on a confined construction site is attainable.

Mining Money: the generative capacities of scientific and legal knowledge practices in the making of resource economies

In 1997 a scandal associated with Bre-X, a junior mining firm, and its prospecting activities in Indonesia, exposed to public scrutiny the ways in which mineral exploration firms acquire, assess and report on scientific claims about the natural environment. At stake here was not just how investors understood the provisional nature of scientific knowledge, but also evidence of fraud. Contemporaneous mining scandals not only included the salting of cores, but also unreliable proprietary sample preparation and assay methods, mis-representations of visual field estimates as drilling results and ‘overly optimistic’ geological reports. This paper reports on initiatives taken in the wake of these scandals and prompted by the Mining Standards Task Force (TSE/OSC 1999). For regulators, mandated to increase investor confidence in Canada’s leading role within the global mining industry, efforts focused first and foremost upon identifying and removing sources of error and wilfulness within the production and circulation of scientific knowledge claims. A common goal cross-cutting these initiatives was ‘a faithful representation of nature’ (Daston and Galison 2010), however, as the paper argues, this was manifest in an assemblage of practices governed by distinct and rival regulative visions of science and the making of markets in claims about ‘nature’. These ‘practices of fidelity’, it is argued, can be consequential in shaping the spatial and temporal dynamics of the marketization of nature.

Introduction to Domain-Driven Data Mining Special Section

In the last decade, data mining has emerged as one of the most dynamic and lively areas in information technology. Although many algorithms and techniques for data mining have been proposed, they either focus on domain independent techniques or on very specific domain problems. A general requirement in bridging the gap between academia and business is to cater to general domain-related issues surrounding real-life applications, such as constraints, organizational factors, domain expert knowledge, domain adaption, and operational knowledge. Unfortunately, these either have not been addressed, or have not been sufficiently addressed, in current data mining research and development.Domain-Driven Data Mining (D3M) aims to develop general principles, methodologies, and techniques for modeling and merging comprehensive domain-related factors and synthesized ubiquitous intelligence surrounding problem domains with the data mining process, and discovering knowledge to support business decision-making. This paper aims to report original, cutting-edge, and state-of-the-art progress in D3M. It covers theoretical and applied contributions aiming to: 1) propose next-generation data mining frameworks and processes for actionable knowledge discovery, 2) investigate effective (automated, human and machine-centered and/or human-machined-co-operated) principles and approaches for acquiring, representing, modelling, and engaging ubiquitous intelligence in real-world data mining, and 3) develop workable and operational systems balancing technical significance and applications concerns, and converting and delivering actionable knowledge into operational applications rules to seamlessly engage application processes and systems.

Hot-melt extrusion technology and pharmaceutical application

The use of hot-melt extrusion (HME) within the pharmaceutical industry is steadily increasing, due to its proven ability to efficiently manufacture novel products. The process has been utilized readily in the plastics industry for over a century and has been used to manufacture medical devices for several decades. The development of novel drugs with poor solubility and bioavailability brought the application of HME into the realm of drug-delivery systems. This has specifically been shown in the development of drug-delivery systems of both solid dosage forms and transdermal patches. HME involves the application of heat, pressure and agitation through an extrusion channel to mix materials together, and subsequently forcing them out through a die. Twin-screw extruders are most popular in solid dosage form development as it imparts both dispersive and distributive mixing. It blends materials while also imparting high shear to break-up particles and disperse them. HME extrusion has been shown to molecularly disperse poorly soluble drugs in a polymer carrier, increasing dissolution rates and bioavailability. The most common difficulty encountered in producing such dispersions is stabilization of amorphous drugs, which prevents them from recrystallization during storage. Pharmaceutical industrial suppliers, of both materials and equipment, have increased their development of equipment and chemicals for specific use with HME. Clearly, HME has been identified as an important and significant process to further enhance drug solubility and solid-dispersion production. © 2012 Future Science Ltd.

Occurrence and Partitioning of Cadmium, Arsenic and Lead in Mine Impacted Paddy Rice: Hunan, China

Paddy rice has been likened to nictiana sp in its ability to scavenge cadmium (Cd) from soil, whereas arsenic (As) accumulation is commonly an order of magnitude higher than in other cereal crops. In areas such as those found in parts of Hunan province in south central China, base-metal mining activities and rice farming coexist. Therefore there is a considerable likelihood that lead (Pb), in addition to Cd and As, will accumulate in rice grown in parts of this region above levels suitable for human consumption. To test this hypothesis, a widespread provincial survey of rice from mine spoilt paddies (n = 100), in addition to a follow-up market grain survey (n = 122) conducted in mine impacted areas was undertaken to determine the safety of local rice supply networks. Furthermore, a specific Cd, As, and Pb biogeochemical survey of paddy soil and rice was conducted within southern China, targeting sites impacted by mining of varying intensities to calibrate rice metal(loid) transfer models and transfer factors that can be used to predict tissue loading. Results revealed a number of highly significant correlations between shoot, husk, bran, and endosperm rice tissue fractions and that rice from mining areas was enriched in Cd, As, and Pb. Sixty-five, 50, and 34% of all the mine-impacted field rice was predicted to fail national food standards for Cd, As, and Pb, respectively. Although, not as elevated as the grains from the mine-impacted field survey, it was demonstrated that metal(loid) tainted rice was entering food supply chains intended for direct human consumption.

Modelling lay-up automation and production rate interaction on the cost of large stiffened panel components

This paper presents an integrated design and costing method for large stiffened panels for the purpose of investigating the influence and interaction of lay-up technology and production rate on manufacturing cost. A series of wing cover panels (≈586kg, 19·9m2) have been sized with realistic requirements considering manual and automated lay-up routes. The integrated method has enabled the quantification of component unit cost sensitivity to changes in annual production rate and employed equipment maximum deposition rate. Moreover the results demonstrate the interconnected relationship between lay-up process and panel design, and unit cost. The optimum unit cost solution when using automated lay-up is a combination of the minimum deposition rate and minimum number of lay-up machines to meet the required production rate. However, the location of the optimum unit cost, at the boundaries between the number of lay-up machines required, can make unit cost very sensitive to small changes in component design, production rate, and equipment maximum deposition rate. - See more at: http://aerosociety.com/News/Publications/Aero-Journal/Online/1941/Modelling-layup-automation-and-production-rate-interaction-on-the-cost-of-large-stiffened-panel-components#sthash.0fLuu9iG.dpuf

Microneedle characterisation: the need for universal acceptance criteria and GMP specifications when moving towards commercialisation

With interest in microneedles as a novel drug transdermal delivery system increasing rapidly since the late 1990s (Margetts and Sawyer Contin Educ Anaesthesia Crit Care Pain. 7(5):171-76, 2007), a diverse range of microneedle systems have been fabricated with varying designs and dimensions. However, there are still very few commercially available microneedle products. One major issue regarding microneedle manufacture on an industrial scale is the lack of specific quality standards for this novel dosage form in the context of Good Manufacturing Practice (GMP). A range of mechanical characterisation tests and microneedle insertion analysis techniques are used by researchers working on microneedle systems to assess the safety and performance profiles of their various designs. The lack of standardised tests and equipment used to demonstrate microneedle mechanical properties and insertion capability makes it difficult to directly compare the in use performance of candidate systems. This review highlights the mechanical tests and insertion analytical techniques used by various groups to characterise microneedles. This in turn exposes the urgent need for consistency across the range of microneedle systems in order to promote innovation and the successful commercialisation of microneedle products.

Materials in extreme environments for energy, accelerators and space applications at ELI-NP.

As a leading facility in laser-driven nuclear physics, ELI-NP will develop innovative research in the fields of materials behavior in extreme environments and radiobiology, with applications in the development of accelerator components, new materials for next generation fusion and fission reactors, shielding solutions for equipment and human crew in long term space missions and new biomedical technologies. The specific properties of the laser-driven radiation produced with two lasers of 1 PW at a pulse repetition rate of 1 Hz each are an ultra-short time scale, a relatively broadband spectrum and the possibility to provide simultaneously several types of radiation. Complex, cosmic-like radiation will be produced in a ground-based laboratory allowing comprehensive investigations of their effects on materials and biological systems. The expected maximum energy and intensity of the radiation beams are 19 MeV with 10^9 photon/pulse for photon radiation, 2 GeV with 108 electron/pulse for electron beams, 60 MeV with 10^12 proton/pulse for proton and ion beams and 60 MeV with 107 neutron/pulse for a neutron source. Research efforts will be directed also towards measurements for radioprotection of the prompt and activated dose, as a function of laser and target characteristics and to the development and testing of various dosimetric methods and equipment.

Session organiser/chair: The architecture of coal and other energies

Coal ignited the industrial revolution. An organic sedimentary rock that energized the globe, transforming cities, landscapes and societies for generations, the importance of ‘King Coal’ to the development and consolidation of modernity has been well-recognised. And yet, as a critical factor in the production of modern architecture, coal—as well as other forms of energy—has been mostly overlooked.

From Appalachia to Lanarkshire, from the pits of northern France, Belgium and the Ruhr valley, to the monumental opencast excavations of Russia, China, Africa and Australia, mining operations have altered the immediate social and physical landscapes of coal-rich areas. But in contrast to its own underground conditions of production, the winning of coal, especially in the twentieth-century, has produced conspicuously enlightened and humane approaches to architecture and urbanism. In the twentieth century, educational buildings, holiday camps, hospitals, swimming pools, convalescent homes and housing prevailed alongside model collieries in mining settlements and areas connected to them. In 1930s Britain, pit head baths—funded by a levy on each ton produced—were often built in the International Style. Many won praise for architectural merit, appearing in Nicholas Pevsner’s guides to the buildings of England alongside cathedrals, village manors and Masonic halls as testimonies to the public good.

The deep relationships between coal and modernity, and the expressions of architecture it has articulated, in the collieries from which it was hewn, the landscape and towns it shaped, and the power stations and other infrastructure where it was used, offer innumerable opportunities to explore how coal produced architectures which embodied and expressed both social and technological conditions. While proposals on coal are preferred, we also welcome papers that interrogate the complexity, heterogeneity and hybridity of other forms of energy production and how these have also interceded into architectural form at a range of scales.

Muscle-specific mutations accumulate with aging in critical human mtDNA control sites for replication.

The recently discovered aging-dependent large accumulation of point mutations in the human fibroblast mtDNA control region raised the question of their occurrence in postmitotic tissues. In the present work, analysis of biopsied or autopsied human skeletal muscle revealed the absence or only minimal presence of those mutations. By contrast, surprisingly, most of 26 individuals 53 to 92 years old, without a known history of neuromuscular disease, exhibited at mtDNA replication control sites in muscle an accumulation of two new point mutations, i.e., A189G and T408A, which were absent or marginally present in 19 individuals younger than 34 years. These two mutations were not found in fibroblasts from 22 subjects 64 to 101 years of age (T408A), or were present only in three subjects in very low amounts (A189G). Furthermore, in several older individuals exhibiting an accumulation in muscle of one or both of these mutations, they were nearly absent in other tissues, whereas the most frequent fibroblast-specific mutation (T414G) was present in skin, but not in muscle. Among eight additional individuals exhibiting partial denervation of their biopsied muscle, four subjects >80 years old had accumulated the two muscle-specific point mutations, which were, conversely, present at only very low levels in four subjects <or =40 years old. The striking tissue specificity of the muscle mtDNA mutations detected here and their mapping at critical sites for mtDNA replication strongly point to the involvement of a specific mutagenic machinery and to the functional relevance of these mutations.

Nidovirales: evolving the largest RNA virus genome.

This review focuses on the monophyletic group of animal RNA viruses united in the order Nidovirales. The order includes the distantly related coronaviruses, toroviruses, and roniviruses, which possess the largest known RNA genomes (from 26 to 32 kb) and will therefore be called ‘large’ nidoviruses in this review. They are compared with their arterivirus cousins, which also belong to the Nidovirales despite having a much smaller genome (13–16 kb). Common and unique features that have been identified for either large or all nidoviruses are outlined. These include the nidovirus genetic plan and genome diversity, the composition of the replicase machinery and virus particles, virus-specific accessory genes, the mechanisms of RNA and protein synthesis, and the origin and evolution of nidoviruses with small and large genomes. Nidoviruses employ single-stranded, polycistronic RNA genomes of positive polarity that direct the synthesis of the subunits of the replicative complex, including the RNA-dependent RNA polymerase and helicase. Replicase gene expression is under the principal control of a ribosomal frameshifting signal and a chymotrypsin-like protease, which is assisted by one or more papain-like proteases. A nested set of subgenomic RNAs is synthesized to express the 3'-proximal ORFs that encode most conserved structural proteins and, in some large nidoviruses, also diverse accessory proteins that may promote virus adaptation to specific hosts. The replicase machinery includes a set of RNA-processing enzymes some of which are unique for either all or large nidoviruses. The acquisition of these enzymes may have improved the low fidelity of RNA replication to allow genome expansion and give rise to the ancestors of small and, subsequently, large nidoviruses.