15 resultados para 13368-057

em QUB Research Portal - Research Directory and Institutional Repository for Queen's University Belfast


Relevância:

10.00% 10.00%

Publicador:

Resumo:

AIMS
The aim of this study was to investigate the in?uence of genetic polymorphisms in ABCB1 on the incidence of nephrotoxicity and tacrolimus dosage-requirements in paediatric patients following liver transplantation.
METHODS
Fifty-one paediatric liver transplant recipients receiving tacrolimus were genotyped for ABCB1 C1236>T, G2677>T and C3435>T polymorphisms. Dose-adjusted tacrolimus trough concentrations and estimated glomerular ?ltration rates (EGFR) indicative of renal toxicity were determined and correlated with the corresponding genotypes.
RESULTS
The present study revealed a higher incidence of the ABCB1 variant-alleles examined among patients with renal dysfunction (30% reduction in EGFR) at 6 months post-transplantation (1236T allele: 63.3% vs 37.5% in controls,P = 0.019; 2677T allele: 63.3% vs. 35.9%, p = 0.012; 3435T allele: 60% vs. 39.1%,P = 0.057). Carriers of the G2677->T variant allele also had a signi?cant reduction (%) in EGFR at 12 months post-transplant (mean difference = 22.6%; P = 0.031). Haplotype analysis showed a signi?cant association between T-T-T haplotypes and an increased incidence of nephrotoxicity at 6 months post-transplantation (haplotype-frequency = 52.9% in nephrotoxic patients vs 29.4% in controls; P = 0.029). Furthermore, G2677->T and C3435->T polymorphisms and T-T-T haplotypes were signi?cantly correlated with higher tacrolimus dose-adjusted pre-dose concentrations at various time points examined long after drug initiation.
CONCLUSIONS
These ?ndings suggest that ABCB1 polymorphisms in the native intestine signi?cantly in?uence tacrolimus dosage-requirement in the stable phase after transplantation. In addition, ABCB1 polymorphisms in paediatric liver transplant recipients may predispose them to nephrotoxicity over the ?rst year posttransplantation. Genotyping future transplant recipients for ABCB1 polymorphisms, therefore, could have the potential to individualize better tacrolimus immunosuppressive therapy and enhance drug safety

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This paper develops an improved and accessible framework for modelling time-dependent behaviour of soils using the concepts of elasticity and viscoplasticity. The mathematical description of viscoplastic straining is formulated based on a purely viscoplastic and measurable phenomenon, namely creep. The resulting expression for the viscoplastic strain rates includes a measure of both effective stress and the corresponding volumetric packing of the soil particles. In this way, the model differs from some earlier viscoplastic models and arguably provides a better conceptual description of time-dependent behaviour. Analytical solutions are developed for the simulation of drained and undrained strain-controlled triaxial compression tests. The model is then used to back-analyze the measured response of normally consolidated to moderately overconsolidated specimens of a soft estuarine soil in undrained triaxial compression. The model captures aspects of soil behaviour that cannot be simulated using time-independent elastic–plastic models. Specifically, it can capture the dependence of stress–strain relationships and undrained shear strength on strain rate, the development of irrecoverable plastic strains at constant stress (creep), and the relaxation of stresses at constant strain

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Three experiments were conducted to test the effectiveness of different footbath solutions and regimens in the treatment of digital dermatitis (DD) in dairy cows. During the study, groups of cows walked through allocated footbath solutions after milking on 4 consecutive occasions. All cows were scored weekly for DD lesion stage on the hind feet during milking. A “transition grade” was assigned on the basis of whether the DD lesions improved (1) or deteriorated or did not improve (0) from week to week. This grade per cow was averaged for all cows in the group. In experiment 1, 118 cows were allocated to 1 of 3 footbath treatments for 5 wk: (1) 5% CuSO4 each week, (2) 2% ClO- each week, or (3) no footbath (control). The mean transition grade, and proportion of cows without DD lesions at the end of the trial were significantly higher for treatment 1 above (0.36, 0.13, and 0.11, respectively; standard error of the difference, SED=0.057). In experiment 2, 117 cows were allocated to 1 of 4 footbath treatment regimens for 8 wk: (1) 5% CuSO4 each week, (2) 2% CuSO4 each week, (3) 5% CuSO4 each fortnight, or (4) 2% CuSO4 each fortnight. For welfare reasons, cows allocated to the weekly and fortnightly footbath regimens had an average prevalence of >60% and =25% active DD at the start of the trial, respectively. Significantly more cows had no DD lesions (0.53 vs. 0.36, respectively; SED=0.049), and the mean transition grade of DD lesions was higher in the 5% compared with the 2% weekly CuSO4 treatment (0.52 vs. 0.38, respectively; SED=0.066). Similarly, significantly more cows had no DD lesions in the 5% compared with the 2% fortnightly CuSO4 treatments (0.64 vs. 0.47, respectively; SED=0.049). In experiment 3, 95 cows were allocated to 1 of 3 footbath treatments: (1) each week alternating 5% CuSO4 with 10% salt water, (2) each week alternating 5% CuSO4 with water, or (3) 5% CuSO4 each fortnight (control). After 10 wk, more cows had no DD in the salt water treatment than in the control treatment (0.35 vs. 0.26, respectively; SED=0.038), but levels of active lesions were higher for this treatment than in the other 2 treatments (0.17, 0.00, and 0.13, respectively; SED=0.029). Treatment did not affect mean transition grade of DD lesions. In conclusion, CuSO4 was the only footbath solution that was consistently effective for treatment of DD. In cases when DD prevalence was high, a footbath each week using 5% CuSO4 was the most effective treatment.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Recently polymeric adsorbents have been emerging as highly effective alternatives to activated carbons for pollutant removal from industrial effluents. Poly(methyl methacrylate) (PMMA), polymerized using the atom transfer radical polymerization (ATRP) technique has been investigated for its feasibility to remove phenol from aqueous solution. Adsorption equilibrium and kinetic investigations were undertaken to evaluate the effect of contact time, initial concentration (10-90 mg/L), and temperature (25-55 degrees C). Phenol uptake was found to increase with increase in initial concentration and agitation time. The adsorption kinetics were found to follow the pseudo-second-order kinetic model. The intra-particle diffusion analysis indicated that film diffusion may be the rate controlling step in the removal process. Experimental equilibrium data were fitted to five different isotherm models namely Langmuir, Freundlich, Dubinin-Radushkevich, Temkin and Redlich-Peterson by non-linear least square regression and their goodness-of-fit evaluated in terms of mean relative error (MRE) and standard error of estimate (SEE). The adsorption equilibrium data were best represented by Freundlich and Redlich-Peterson isotherms. Thermodynamic parameters such as Delta G degrees and Delta H degrees indicated that the sorption process is exothermic and spontaneous in nature and that higher ambient temperature results in more favourable adsorption. (C) 2011 Elsevier B.V. All rights reserved.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

A sheep trial was performed to evaluate two diagnostic assays, a faecal egg count reduction test (FECRT) and a coproantigen reduction test (CRT), for the diagnosis of resistance of Fasciola hepatica to triclabendazole (TCBZ). The FECRT defines successful TCBZ treatment as a 95% or greater reduction in fluke faecal egg counts (FECs) at 14 days post-treatment (dpt). The CRT defines effective TCBZ treatment as faeces negative for Fasciola coproantigens at 14 dpt, as measured by the commercial BIO K201 coproantigen ELISA (Bio-X Diagnostics, Jemelle, Belgium).

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Electricity systems models are software tools used to manage electricity demand and the electricity systems, to trade electricity and for generation expansion planning purposes. Various portfolios and scenarios are modelled in order to compare the effects of decision making in policy and on business development plans in electricity systems so as to best advise governments and industry on the least cost economic and environmental approach to electricity supply, while maintaining a secure supply of sufficient quality electricity. The modelling techniques developed to study vertically integrated state monopolies are now applied in liberalised markets where the issues and constraints are more complex. This paper reviews the changing role of electricity systems modelling in a strategic manner, focussing on the modelling response to key developments, the move away from monopoly towards liberalised market regimes and the increasing complexity brought about by policy targets for renewable energy and emissions. The paper provides an overview of electricity systems modelling techniques, discusses a number of key proprietary electricity systems models used in the USA and Europe and provides an information resource to the electricity analyst not currently readily available in the literature on the choice of model to investigate different aspects of the electricity system.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

An extensive investigation of the ferromagnetic compound TlCo2S2 has resulted in new information on the electronic and magnetic structure. Electronic structure calculations showed that magnetic ordering is energetically favorable with a clear driving force for ferromagnetic coupling within the cobalt layers. TlCo2S2 is metallic and the conductivity is due to holes in the valence band. XPS single crystal measurements did not show evidence of mixed oxidation states of cobalt. Neutron powder diffraction resulted in a ferromagnetic structure with the magnetic moment in the ab-plane. The derived magnetic moment of the cobalt atom is 0.65(2) mu(B) at 10 K and is in very good agreement with the value, mu(sat) = 0.65(1) mu(B) at 10 K, inferred from the magnetic hysteresis curve. (C) 2004 Elsevier Inc. All rights reserved.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

It seems there is a positive correlation between rice content and arsenic level in foods. This is of extraordinary importance for infants below 1 y of age because their diet is very limited and in some cases is highly dependent on rice-based products; this is particularly true for infants with the celiac disease because they have no other option than consume gluten-free products, such as rice or corn. Arsenic contents were significantly higher (P <0.001) in gluten-free infant rice (0.057 mg kg-1) than in products with gluten, based on a mixture of cereals (0.024 mg kg-1). Besides, especial precaution must be taken when preparing rice-based products at home, because arsenic content in Spanish rice was high, with levels being above 0.3 mg kg-1 in some cases.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Background: Ataluren was developed to restore functional protein production in genetic disorders caused by nonsense mutations, which are the cause of cystic fibrosis in 10% of patients. This trial was designed to assess the efficacy and safety of ataluren in patients with nonsense-mutation cystic fibrosis. 

Methods: This randomised, double-blind, placebo-controlled, phase 3 study enrolled patients from 36 sites in 11 countries in North America and Europe. Eligible patients with nonsense-mutation cystic fibrosis (aged ≥6 years; abnormal nasal potential difference; sweat chloride >40 mmol/L; forced expiratory volume in 1 s [FEV1] ≥40% and ≤90%) were randomly assigned by interactive response technology to receive oral ataluren (10 mg/kg in morning, 10 mg/kg midday, and 20 mg/kg in evening) or matching placebo for 48 weeks. Randomisation used a block size of four, stratified by age, chronic inhaled antibiotic use, and percent-predicted FEV1. The primary endpoint was relative change in percent-predicted FEV1 from baseline to week 48, analysed in all patients with a post-baseline spirometry measurement. This study is registered with ClinicalTrials.gov, number NCT00803205. 

Findings: Between Sept 8, 2009, and Nov 30, 2010, 238 patients were randomly assigned, of whom 116 in each treatment group had a valid post-baseline spirometry measurement. Relative change from baseline in percent-predicted FEV1 did not differ significantly between ataluren and placebo at week 48 (-2·5% vs -5·5%; difference 3·0% [95% CI -0·8 to 6·3]; p=0·12). The number of pulmonary exacerbations did not differ significantly between treatment groups (rate ratio 0·77 [95% CI 0·57-1·05]; p=0·0992). However, post-hoc analysis of the subgroup of patients not using chronic inhaled tobramycin showed a 5·7% difference (95% CI 1·5-10·1) in relative change from baseline in percent-predicted FEV1 between the ataluren and placebo groups at week 48 (-0·7% [-4·0 to 2·1] vs -6·4% [-9·8 to -3·7]; nominal p=0·0082), and fewer pulmonary exacerbations in the ataluern group (1·42 events [0·9-1·9] vs 2·18 events [1·6-2·7]; rate ratio 0·60 [0·42-0·86]; nominal p=0·0061). Safety profiles were generally similar for ataluren and placebo, except for the occurrence of increased creatinine concentrations (ie, acute kidney injury), which occurred in 18 (15%) of 118 patients in the ataluren group compared with one (<1%) of 120 patients in the placebo group. No life-threatening adverse events or deaths were reported in either group. I

nterpretation: Although ataluren did not improve lung function in the overall population of nonsense-mutation cystic fibrosis patients who received this treatment, it might be beneficial for patients not taking chronic inhaled tobramycin. 

Funding: PTC Therapeutics, Cystic Fibrosis Foundation, US Food and Drug Administration's Office of Orphan Products Development, and the National Institutes of Health. 

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Despite the abundance of studies investigating the performance of composite structures under crush loading, disagreement remains in the literature regarding the effect of increased strain rate on the crush response. This study reports an experimental investigation of the behaviour of a carbon-epoxy composite energy absorber under static and dynamic loading with a strain rate of up to 100s<sup>-1</sup>. Consistent damage modes and measured force responses were obtained in samples tested under the same strain rate. The energy absorption was found to be independent of strain rate as the total energy absorption appeared to be largely associated with fibre-dominated fracture, which is independent of strain rate within the studied range. The results from this study are beneficial for the design of energy absorbing structures.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The most established route to create a laser-based neutron source is by employing laser accelerated, low atomic-number ions in fusion reactions. In addition to the high reaction cross-sections at moderate energies of the projectile ions, the anisotropy in neutron emission is another important feature of beam-fusion reactions. Using a simple numerical model based on neutron generation in a pitcher–catcher scenario, anisotropy in neutron emission was studied for the deuterium–deuterium fusion reaction. Simulation results are consistent with the narrow-divergence ( ∼ 70 ° full width at half maximum) neutron beam recently served in an experiment employing multi-MeV deuteron beams of narrow divergence (up to 30° FWHM, depending on the ion energy) accelerated by a sub-petawatt laser pulse from thin deuterated plastic foils via the Target Normal Sheath Acceleration mechanism. By varying the input ion beam parameters, simulations show that a further improvement in the neutron beam directionality (i.e. reduction in the beam divergence) can be obtained by increasing the projectile ion beam temperature and cut-off energy, as expected from interactions employing higher power lasers at upcoming facilities.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Schistosomes ingest host erythrocytes, liberating large quantities of haem. Despite its toxicity, haem is an essential factor for numerous biological reactions, and may be an important iron source for these helminths. We used a fluorescence haem analogue, palladium mesoporphyrin, to investigate pathways of haem acquisition, and showed that palladium mesoporphyrin accumulates in the vitellaria (eggshell precursor glands) and ovary of female Schistosoma mansoni. Furthermore, incubation of adult females in 10-100 μm cyclosporin A (IC50 = 2.3 μm) inhibits the uptake of palladium mesoporphyrin to these tissues, with tenfold reductions in fluorescence intensity of the ovary. In vitro exposure to cyclosporin A resulted in significant perturbation of egg production, reducing egg output from 34 eggs per female to 5.7 eggs per female over the incubation period, and retardation of egg development. We characterized a S. mansoni homologue of the haem-responsive genes of Caenorhabditis elegans. The gene (Smhrg-1) encodes a protein with a molecular weight of approximately 17 kDa. SmHRG-1 was able to rescue growth in haem transport-deficient HEM1Δ yeast. Transcriptional suppression of Smhrg-1 in adult S. mansoni worms resulted in significant delay in egg maturation, with 47% of eggs from transcriptionally suppressed worms being identified as immature compared with only 27% of eggs laid by control worms treated with firefly luciferase. Our findings indicate the presence of transmembrane haem transporters in schistosomes, with a high abundance of these molecules being present in tissues involved in oogenesis.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

A small scale sample nuclear waste package, consisting of a 28 mm diameter uranium penny encased in grout, was imaged by absorption contrast radiography using a single pulse exposure from an X-ray source driven by a high-power laser. The Vulcan laser was used to deliver a focused pulse of photons to a tantalum foil, in order to generate a bright burst of highly penetrating X-rays (with energy >500 keV), with a source size of <0.5 mm. BAS-TR and BAS-SR image plates were used for image capture, alongside a newly developed Thalium doped Caesium Iodide scintillator-based detector coupled to CCD chips. The uranium penny was clearly resolved to sub-mm accuracy over a 30 cm2 scan area from a single shot acquisition. In addition, neutron generation was demonstrated in situ with the X-ray beam, with a single shot, thus demonstrating the potential for multi-modal criticality testing of waste materials. This feasibility study successfully demonstrated non-destructive radiography of encapsulated, high density, nuclear material. With recent developments of high-power laser systems, to 10 Hz operation, a laser-driven multi-modal beamline for waste monitoring applications is envisioned.