Design, construction and testing of an air-cycle refrigeration system for road transport

The environmental attractions of air-cycle refrigeration are considerable. Following a thermodynamic design analysis, an air-cycle demonstrator plant was constructed within the restricted physical envelope of an existing Thermo King SL200 trailer refrigeration unit. This unique plant operated satisfactorily, delivering sustainable cooling for refrigerated trailers using a completely natural and safe working fluid. The full load capacity of the air-cycle unit at -20 °C was 7,8 kW, 8% greater than the equivalent vapour-cycle unit, but the fuel consumption of the air-cycle plant was excessively high. However, at part load operation the disparity in fuel consumption dropped from approximately 200% to around 80%. The components used in the air-cycle demonstrator were not optimised and considerable potential exists for efficiency improvements, possibly to the point where the air-cycle system could rival the efficiency of the standard vapour-cycle system at part-load operation, which represents the biggest proportion of operating time for most units.

Sequence variation in the CHAT locus shows no association with late-onset Alzheimer's disease

There is substantial evidence for a susceptibility gene for late-onset Alzheimer's disease (AD) on chromosome 10. One of the characteristic features of AD is the degeneration and dysfunction of the cholinergic system. The genes encoding choline acetyltransferase (ChAT) and its vesicular transporter (VAChT), CHAT and SLC18A3 respectively, map to the linked region of chromosome 10 and are therefore both positional and obvious functional candidate genes for late-onset AD. We have screened both genes for sequence variants and investigated each for association with late-onset AD in up to 500 late-onset AD cases and 500 control DNAs collected in the UK. We detected a total of 17 sequence variants. Of these, 14 were in CHAT, comprising three non-synonymous variants (D7N in the S exon, A120T in exon 5 and L243F in exon 8), one synonymous change (H547H), nine single-nucleotide polymorphisms in intronic, untranslated or promoter regions, and a variable number of tandem repeats in intron 7. Three non-coding SNPs were detected in SLC18A3. None demonstrated any reproducible association with late-onset AD in our samples. Levels of linkage disequilibrium were generally low across the CHAT locus but two of the coding variants, D7N and A120T, proved to be in complete linkage disequilibrium.

Towards An Acoustic Model-Based Poroelastic Imaging Method: I. Theoretical Foundation

The ultrasonic measurement and imaging of tissue elasticity is currently under wide investigation and development as a clinical tool for the assessment of a broad range of diseases, but little account in this field has yet been taken of the fact that soft tissue is porous and contains mobile fluid. The ability to squeeze fluid out of tissue may have implications for conventional elasticity imaging, and may present opportunities for new investigative tools. When a homogeneous, isotropic, fluid-saturated poroelastic material with a linearly elastic solid phase and incompressible solid and fluid constituents is subjected to stress, the behaviour of the induced internal strain field is influenced by three material constants: the Young's modulus (E(s)) and Poisson's ratio (nu(s)) of the solid matrix and the permeability (k) of the solid matrix to the pore fluid. New analytical expressions were derived and used to model the time-dependent behaviour of the strain field inside simulated homogeneous cylindrical samples of such a poroelastic material undergoing sustained unconfined compression. A model-based reconstruction technique was developed to produce images of parameters related to the poroelastic material constants (E(s), nu(s), k) from a comparison of the measured and predicted time-dependent spatially varying radial strain. Tests of the method using simulated noisy strain data showed that it is capable of producing three unique parametric images: an image of the Poisson's ratio of the solid matrix, an image of the axial strain (which was not time-dependent subsequent to the application of the compression) and an image representing the product of the aggregate modulus E(s)(1-nu(s))/(1+nu(s))(1-2nu(s)) of the solid matrix and the permeability of the solid matrix to the pore fluid. The analytical expressions were further used to numerically validate a finite element model and to clarify previous work on poroelastography.

The adaptations of a quality of life questionnaire for routine use in clinical practice: the Chronic Respiratory Disease Questionnaire in Cystic Fibrosis.

The assessment of quality of life (QOL) is necessary to monitor the course of disease and to assess the effect of new and existing interventions in clinical practice. This will only be achieved if QOL can be measured accurately and routinely. The aim of this study was to demonstrate the methodology involved in the adaptation and shortening of the Chronic Respiratory Disease Questionnaire (CRDQ) in a population of adults with cystic fibrosis (CF). A single interviewer administered the CRDQ to a sample of 45 adult patients (32 males) with CF prior to assessment of spirometric measures of lung function. Those patients whose lung function was stable at the time of study, and who could attend for a retest within 14 days, were asked to complete the questionnaire at a subsequent visit (n=10). The average interval between visits was 7 days (range 5-14 days). Correlations between spirometry and CRDQ dimensions ranged from -0.003 to 0.426. The fatigue, emotion and mastery dimensions showed high internal consistency, and adequate construct validity. In the small number of patients suitable for retest, the results indicated that the dimensions exhibited adequate test retest reliability. In contrast low internal consistency was demonstrated for the dyspnoea dimension. The fatigue, emotion and mastery dimensions could be reduced, in terms of their number of items without a substantial loss in explanatory power. This study suggests that QOL measurement can be made convenient, and so more easily accessible for routine clinical assessment.

A descriptive study of the usage of spinal manipulative therapy techniques within a randomised clinical trial in acute low back pain

The majority of randomized clinical trials (RCTs) of spinal manipulative therapy have not adequately de?ned the terms ‘mobilization’ and ‘manipulation’, nor distinguished between these terms in reporting the trial interventions. The purpose of this study was to describe the spinal manipulative therapy techniques utilized within a RCT of manipulative therapy (MT; n=80), interferential therapy (IFT; n=80), and a combination of both (CT; n=80) for people with acute low back pain (LBP). Spinal manipulative therapy was de?ned as any ‘mobilization’ (low velocity manual force without a thrust) or ‘manipulation’ (high velocity
thrust) techniques of the spine described by Maitland and Cyriax.
The 16 physiotherapists, all members of the Society of Orthopaedic Medicine, utilized three spinal manipulative therapy patterns in the RCT: Maitland Mobilization (40.4%, n=59), Maitland Mobilization/Cyriax Manipulation (40.4%, n=59) and Cyriax Manipulation (19.1%, n=28). There was a signi?cant difference between the MT and CT groups in their usage of spinal manipulative therapy techniques (w2=9.178; df=2;P=0.01); subjects randomized to the CT group received three times more Cyriax Manipulation (29.2%, n=21/72) than those randomized to the MT group (9.5%, n=7/74; df=1; P=0.003).
The use of mobilization techniques within the trial was comparable with their usage by the general population of physiotherapists in Britain and Ireland for LBP management. However, the usage of manipulation techniques was considerably higher than reported in physiotherapy surveys and may re?ect the postgraduate training of trial therapists.