Bismuth embrittlement of copper is an atomic size effect

Embrittlement by the segregation of impurity elements to grain boundaries is one of a small number of phenomena that can lead to metallurgical failure by fast fracture(1). Here we settle a question that has been debated for over a hundred years(2): how can minute traces of bismuth in copper cause this ductile metal to fail in a brittle manner? Three hypotheses for Bi embrittlement of Cu exist: two assign an electronic effect to either a strengthening(3) or weakening(4) of bonds, the third postulates a simple atomic size effect(5). Here we report first principles quantum mechanical calculations that allow us to reject the electronic hypotheses, while supporting a size effect. We show that upon segregation to the grain boundary, the large Bi atoms weaken the interatomic bonding by pushing apart the Cu atoms at the interface. The resolution of the mechanism underlying grain boundary weakening should be relevant for all cases of embrittlement by oversize impurities.

Multiaxial Deformation of Polyethylene and Polyethylene/Clay Nanocomposites: In Situ Synchrotron Small Angle and Wide Angle X-Ray Scattering Study

A unique in situ multiaxial deformation device has been designed and built specifically for simultaneous synchrotron small angle X-ray scattering (SAXS) and wide angle X-ray scattering (WAXS) measurements. SAXS and WAXS patterns of high-density polyethylene (HDPE) and HDPE/clay nanocomposites were measured in real time during in situ multiaxial deformation at room temperature and at 55 degrees C. It was observed that the morphological evolution of polyethylene is affected by the existence of clay platelets as well as the deformation temperature and strain rate. Martensitic transformation of orthorhombic into monoclinic crystal phases was observed under strain in HDPE, which is delayed and hindered in the presence of clay nanoplatelets. From the SAXS measurements, it was observed that the thickness of the interlamellar amorphous region increased with increasing strain, which is due to elongation of the amorphous chains. The increase in amorphous layer thickness is slightly higher for the nanocomposites compared to the neat polymer. (C) 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 49: 669-677, 2011

Clinical outcomes and inflammatory biomarkers in current smokers and exsmokers with severe asthma

Clinical outcomes are worse in current smokers and exsmokers with mild-to-moderate asthma compared with never smokers, but little is known about the influence of smoking status in patients with severe asthma.

A tubular direct methanol fuel cell with Ti mesh anode

A novel tubular cell structure for a direct methanol fuel cell (DMFC) is proposed based on a tubular Ti mesh and a Ti mesh anode. A dip coating method has been developed to fabricate the cell. The characterization of the tubular MEA has been analyzed by scanning electron microscopy (SEM), energy dispersive X-ray (EDX), half cell and single cell testing. The tubular DMFC single cell comprises: a Ti mesh, a cathode diffusion layer and catalyst layer, a Nafion recast membrane and a PtRuO/Ti anode. Half cell tests show that the optimum catalyst loading, Ru/(Ru + Pt) atomic ratio and the Nafion loading of a PtRuO/Ti mesh anode are: 4 mg cm, 38% and 0.6 mg cm, respectively. Single cell tests show that the Nafion loading of the recast Nafion membrane and the concentration of the methanol in the electrolyte have a major influence on cell performance. © 2006 Elsevier B.V. All rights reserved.

Reactions of nitrogen nucleophiles with enantiopure cyclohexenyl electrophiles:a stereo- and regio- selective study

The reactions of enantiopure cyclohexene epoxides and trans-1,2-bromoacetates, derived from the corresponding substituted benzene cis-dihydrodiol metabolites, with nitrogen nucleophiles, were examined and possible mechanisms proposed. An initial objective was the synthesis of new 1,2-aminoalcohol enantiomers as potential chiral ligands and synthetic scaffolds for library generation. These apparently simple substitution reactions proved to be more complex than initially anticipated and were found to involve a combination of different reaction mechanisms. Allylic trans-1,2-azidohydrins were prepared by Lewis acid-catalysed ring-opening of cyclic vinyl epoxides with sodium azide via an S(N)2 mechanism. On heating, these trans-1,2-azidohydrins isomerized to the corresponding trans-1,4-azidohydrins via a suprafacial allyl azide [3,3]-sigmatropic rearrangement mechanism. Conversion of a 1,2-azidohydrin to a 1,2-azidoacetate moved the equilibrium position in favour of the 1,4-substitution product. Allylic trans-1,2-bromoacetates reacted with sodium azide at room temperature to give C-2 and C-4 substituted products. A clean inversion of configuration at C-2 was found, as expected, from a concerted S(N)2-pathway. However, substitution at C-4 was not stereoselective and resulted in mixtures of 1,4-cis and 1,4-trans products. This observation can be rationalized in terms of competitive S(N)2 and S(N)2 reactions allied to a [3,3]-sigmatropic rearrangement. cis-1,2-Azidohydrins and cis-1,2-azidoacetates were much more prone to rearrange than the corresponding trans-isomers. Reaction of the softer tosamide nucleophile with trans-1,2-bromoacetates resulted, predominantly, in C-4 substitution via a syn-S(N)2 mechanism. One application of the reaction of secondary amines with allylic cyclohexene epoxides, to give trans-1,2-aminoalcohols, is in the synthesis of the anticholinergic drug vesamicol, via an S(N)2 mechanism. Copyright (c) 2013 John Wiley & Sons, Ltd.

The paternal genome and the health of the assisted reproductive technology child

As a number of children born by assisted reproductive technology (ART) are increasing each year across the developed world, the health of such offspring is a matter of public concern. Does the integrity of the paternal genome impact on offspring health? In societal terms, as birth rates fall, and the Western population become unsustainable, do the benefits outweigh the costs of creating and providing for this ART conceived sub population? There are little data to date to answer these questions. The long‑term health of such children has largely been ignored, and success measured only by early (pre-birth) outcomes such as embryo quality or pregnancy. However, there are powerful paradigms such as ageing and smoking that give vital clues as to the potential impact of unhealthy spermatozoa on disease risk, mental and physical health, fertility and mortality of these offspring.

Towards core outcome set (COS) development: a follow-up descriptive survey of outcomes in Cochrane reviews

BACKGROUND: A core outcome set (COS) can address problems of outcome heterogeneity and outcome reporting bias in trials and systematic reviews, including Cochrane reviews, helping to reduce waste. One of the aims of the international Core Outcome Measures in Effectiveness Trials (COMET) Initiative is to link the development and use of COS with the outcomes specified and reported in Cochrane reviews, including the outcomes listed in the summary of findings (SoF) tables. As part of this work, an earlier exploratory survey of the outcomes of newly published 2007 and 2011 Cochrane reviews was performed. This survey examined the use of COS, the variety of specified outcomes, and outcome reporting in Cochrane reviews by Cochrane Review Group (CRG). To examine changes over time and to explore outcomes that were repeatedly specified over time in Cochrane reviews by CRG, we conducted a follow-up survey of outcomes in 2013 Cochrane reviews.

METHODS: A descriptive survey of outcomes in Cochrane reviews that were first published in 2013. Outcomes specified in the methods sections and reported in the results section of the Cochrane reviews were examined by CRG. We also explored the uptake of SoF tables, the number of outcomes included in these, and the quality of the evidence for the outcomes.

RESULTS: Across the 50 CRGs, 375 Cochrane reviews that included at least one study specified a total of 3142 outcomes. Of these outcomes, 32 % (1008) were not reported in the results section of these reviews. For 23 % (233) of these non-reported outcomes, we did not find any reason in the text of the review for this non-report. Fifty-seven percent (216/375) of reviews included a SoF table.

CONCLUSIONS: The proportion of specified outcomes that were reported in Cochrane reviews had increased in 2013 (68 %) compared to 2007 (61 %) and 2011 (65 %). Importantly, 2013 Cochrane reviews that did not report specified outcomes were twice as likely to provide an explanation for why the outcome was not reported. There has been an increased uptake of SoF tables in Cochrane reviews. Outcomes that were repeatedly specified in Cochrane reviews by CRG in 2007, 2011, and 2013 may assist COS development.

Highly CO2 sensitive extruded fluorescent plastic indicator film based on HPTS

Highly-sensitive optical fluorescent extruded plastic films are reported for the detection of gaseous and dissolved CO2. The pH-sensitive fluorescent dye used is 8-Hydroxypyrene-1,3,6-trisulfonic acid trisodium salt (HPTS, PTS-) coated on the surface of hydrophilic fumed silica and the base is tetrabutylammonium hydroxide (TBAH). The above components are used to create an HPTS pigment (i.e. HPTS/SiO2/TBAH) with a high CO2 sensitivity (%CO2(S=1/2) = 0.16%) and fast 50% response (t50↓) = 2 s and recovery (t50↑) = 5 s times. Highly CO2-sensitive plastic films are then fabricated, via the extrusion of the HPTS pigment powder in low-density polyethylene (LDPE). As with the HPTS-pigment, the luminescence intensity (at 515 nm) and absorbance (at 475 nm) of the HPTS plastic film decreases as the %CO2 in the ambient gas phase increases. The HPTS plastic film exhibits a high CO2 sensitivity, %CO2(S=1/2), of 0.29%, but a response time ˂2 min and recovery time ˂40 min, which is slower than that of the HPTS pigment. The HPTS plastic film is very stable under ambient conditions, (with a shelf life ˃ six month when stored in the dark but under otherwise ambient conditions). Moreover, the HPTS-film is stable in water, salt solution and even in acid (pH=2), and in each of these media it can be used to detect dissolved CO2.