Direct Detection of YORP Spin-up on Asteroid (25143) Itokawa and Implications for its Internal Structure

Near-Earth asteroid (25143) Itokawa was visited by the Hayabusa spacecraft in 2005, resulting in a highly detailed surface shape and topography model. This model has led to several predictions for the expected radiative torques on this asteroid, suggesting that its spin rate should be decelerating. Through an observational survey spanning 2001 to 2013 we have successfully measured an acceleration in its spin rate of dω/dt = 3.54 (± 0.38) × 10^(-8) rad day^(-2), equivalent to a decrease of its rotation period of ~ 45 ms year^(-1). Using the shape model determined from the Hayabusa spacecraft, we applied a detailed thermophysical analysis, to reconcile the predicted YORP strength with that observed. We find that the center-of-mass for Itokawa must be shifted by ~20 m along the long-axis of the asteroid to reconcile observations with theory. This can be explained if Itokawa is composed of two separate bodies with very different bulk densities of 1740 ± 110 kg m^(-3) and 2730 ± 440 kg m^(-3), and was formed from the merger of two separate bodies, consistent with the collapse of a binary system or the re-accumulation of material from a catastrophic collisional disruption. We demonstrate that an observational measurement of radiative torques, when combined with a detailed shape model, can provide insight into the interior structure of an asteroid.

Preparation of Aqueous Core/Polymer Shell Microcapsules by Internal Phase Separation

Aqueous core/polymer shell microcapsules with mommuclear and polynuclear core morphologies have been formed by internal phase separation from water-in-oil emulsions. The water-in-oil emulsions were prepared with the shell polymer dissolved in the aqueous phase by adding a low boiling point cosolvent. Subsequent removal of this cosolvent (by evaporation) leads to phase separation of the polymer and, if the spreading conditions are correct, formation of a polymer shell encapsulating the aqueous core. Poly(tetrahydrofuran) (PTHF) shell/aqueous core microcapsules, with a single (mononuclear) core, have been prepared, but the low T-g (-84 degreesC) of PTHF makes characterization of the particles more difficult. Poly(methyl methacrylate) and poly(isobutyl methacrylate) have higher T-g values (105 and 55 degreesC, respectively) and can be dissolved in water at sufficiently high acetone concentrations, but evaporation of the acetone from the emulsion droplets in these cases mostly resulted in polynuclear capsules, that is, having cores with many very small water droplets contained within the polymer matrix. Microcapsules with fewer, larger aqueous droplets in the core could be produced by reducing the rate of evaporation of the acetone. A possible mechanism for the formation of these polynuclear cores is suggested. These microcapsules were prepared dispersed in an oil-continuous phase. They could, however, be successfully transferred to a water-continuous phase, using a simple centrifugation technique. In this way, microcapsules with aqueous cores, dispersed in an aqueous medium, could be made. It would appear that a real challenge with the water-core systems, compared to the previous oil-core systems, is to obtain the correct order of magnitude of the three interfacial tensions, between the polymer, the aqueous phase, and the continuous oil phase; these control the spreading conditions necessary to produce shells rather than "acorns".

Retinopathy in type 1 diabetes mellitus: Major differences between rural and urban dwellers in northwest Ethiopia

Aim: To audit levels of diabetes-related eye disease in Type 1 diabetes mellitus (T1DM) patients in northwest Ethiopia. In particular to establish whether, despite identical clinical goals, major differences between the physically demanding life-style of rural subsistence farmers and the sedentary life-style of urban dwellers would influence the prevalence of diabetes-related eye complications. 

Methods: A robust infrastructure for chronic disease management that comprehensively includes all rural dwellers was a pre-requisite for the investigation. A total of 544 T1DM were examined, representing 80% of all T1DM patients under regular review at both the urban and rural clinics and representative of patient age and gender (62.1% male, 37.9% female) of T1DM patients from this region; all were supervised by the same clinical team. Eye examinations were performed for visual acuity, cataract and retinal changes (retinal photography). HbA1c levels and the presence or absence of hypertension were recorded. 

Results/conclusions: Urban and rural groups had similar prevalences of severe visual impairment/blindness (7.0% urban, 5.2% rural) and cataract (7.3% urban, 7.1% rural). By contrast, urban dwellers had a significantly higher prevalence of retinopathy compared to rural patients, 16.1% and 5.0%, respectively (OR 2.9, p <. 0.02, after adjustment for duration, age, gender and hypertension). There was a 3-fold greater prevalence of hypertension in urban patients, whereas HbA1c levels were similar in the two groups. Since diabetic retinopathy is closely associated with microvascular disease and endothelial dysfunction, the possible influences of hypertension to increase and of sustained physical activity to reduce endothelial dysfunction are discussed.

Quality Assurance for GCxGC-FID, Accreditation for TPH CWG Protocol

A new technological approach in the analysis and forensic interpretation of Total Hydrocarbons in soils and waters using 2D Gas Chromatography method (GC-GC) was developed alongside environmental forensic and the assessment models to provide better customer products for the environmental industry.
The objective was to develop an analytical methodology for TPH CWG. Raw data from this method is then to be evaluated for forensic interpretation and risk assessment modelling. Access will be made available to the expertise in methods of forensic tracing contaminant sources, transport modelling, human health risk modelling and detailed quantitative risk assessment.
The quantification of internal standards was key to the development of this method. As the laboratory does not test for TPH in 1D, it was requested during INAB ISO 17025 audit to individually map out where each compound falls chromatographically in the 2D. This was done through comparing carbon equivalent numbers to the n-alkane carbons. This proved e.g. 2-methylnaphthalene has 11 carbons in its structure; its carbon equivalent is 12.84 , the result of which falls within the band of Aromatic eC12-eC16 as opposed to expected eC10-eC12. This was carried out for all 16 PAH (polyaromatic hydrocarbons) and BTEX (benzene, toluene, ethylbenzene and o, m and p-xylenes). The n-alkanes were also assigned to their corresponding aliphatic bands e.g. nC8 would be expected to be in nC8-nC10.
The method was validated through a designated systematic experimental protocol and was challenged with spikes of known concentration of hydrocarbon parameters such as recoveries, precision, bias and linearity. The method was verified by testing a certified reference material which was used as a proficiency round of testing for numerous laboratories.
It is hoped that the method will be used in conjunction with the analysis through Bonn Agreement with their OSINet group. This is a panel of experts and laboratories (including CLS) who forensically identify oil spill contamination from a water source.
This method can prove itself to be a robust method and benefit the industry for contaminated land and water but the method needs to be seen as separate from the regular 1D chromatography. It will help identify contaminants and assist consultants, regulators, clients and scientists valuable information not seen in 1D

An audit of antimicrobial treatment of lower respiratory and urinary tract infections in a hospital setting

Objectives: To audit the quality of treatment of lower respiratory tract infections (LRTIs) and urinary tract infections (UTIs) and to identify targets for antibiotic stewardship. Methods: The audit involved collecting data on admitted patients, who were diagnosed with LRTIs or UTIs and subsequently received antibiotic treatment (January 2009-April 2009). Key findings: The percentage adherence rate for hospital antibiotic policy was 68.6% (24/35). Documentation of the CURB-65 score was found in 80% (16/20) of the patients' clinical notes, for which 46.2% (6/13) of patients were treated according to their CURB- 65 score. The percentages of delayed and missed doses for all antibiotics were 21.7% (254/1171) and 8.6% (101/1171), respectively. The percentage of patients switched from intravenous to oral antibiotics in accordance with the policy was 58.5% (31/53). The mean length of stay for patients switched in line with the guidelines was 6.9 days (range: 2-18 days) compared with 13.2 days (range: 4-28 days) for patients treated with intravenous antibiotics >24 h after the intravenous to oral switch criteria were fulfilled; this equates to on average an extra 6.3 days of hospitalisation (p=0.01). Conclusions: The study identified a number of targets for quality improvement including adherence to antibiotic policy, documentation of the CURB-65 score in patients' notes and treating patients accordingly, addressing the issue of missed and delayed doses, and maintaining adherence to the hospital intravenous-to-oral antibiotic switch policy. The findings suggest that the quality of antibiotic prescribing could be improved by measuring and addressing such performance indicators.

Review of the Viability Audit process: analysis of post-primary school data

This paper provides an analysis of the post-primary school data provided in the viability audit report published in February 2012 and complements a paper already prepared with an analysis of primary school data. The Viability Audit has been led by the Education and Library Boards, working in close conjunction with CCMS. The Area Planning process was led by the Department of Education, working with the Education and Library Boards and CCMS.

Review of the Viability Audit process: analysis of primary school data

This paper provides an analysis of the primary school data provided in the viability audit report published in February 2012. The Viability Audit has been led by the Education and Library Boards, working in close conjunction with CCMS. The Area Planning process was led by the Department of Education, working with the Education and Library Boards and CCMS. Draft area planning reports, and revised reports following consultation, have been published for post primary schools; draft area planning reports for primary schools have been published and are not out for consultation. It should be noted that the draft area plan reports for primary schools used updated data available to the ELBs so some of the patterns will differ slightly from those reported in the analysis below.

EU Social and Labour Rights and EU Internal Market Law: Study for the EMPL Committee

EU Social and Labour Rights have developed incrementally, originally through a set of legislative initiatives creating selective employment rights, followed by a non-binding Charter of Social Rights. Only in 2009, social and labour rights became legally binding through the Charter of Fundamental Rights for the European Union (CFREU). By contrast, the EU Internal Market - an area without frontiers where goods, persons, services and capital can circulate freely – has been enshrined in legally enforceable Treaty provisions from 1958. These comprise the economic freedoms guaranteeing said free circulation and a system ensuring that competition is not distorted within the Internal Market (Protocol 27 to the Treaty of Lisbon). Tensions between Internal Market law and social and labour rights have been observed in analyses of EU case law and legislation. This study explores responses by socio-economic and political actors at national and EU levels to such tensions, focusing on collective labour rights, rights to fair working conditions and rights to social security and social assistance (Articles 12, 28, 31, 34 Charter of Fundamental Rights for the European Union). On the basis of the current Treaties and the CFREU, the constitutionally conditioned Internal Market emerges as a way to overcome the perception that social and labour rights limit Internal Market law, or vice versa. On this basis, alternative responses to perceived tensions are proposed, focused on posting of workers, furthering fair employment conditions through public procurement and enabling effective collective bargaining and industrial action in the Internal Market.