138 resultados para transformation.
Resumo:
The magnetoelectric coupling in multiferroic materials is promising for a wide range of applications, yet manipulating magnetic ordering by electric field proves elusive to obtain and difficult to control. In this paper, we explore the prospect of controlling magnetic ordering in misfit strained bismuth ferrite (BiFeO3, BFO) films, combining theoretical analysis, numerical simulations, and experimental characterizations. Electric field induced transformation from a tetragonal phase to a distorted rhombohedral one in strain engineered BFO films has been identified by thermodynamic analysis, and realized by scanning probe microscopy (SPM) experiment. By breaking the rotational symmetry of a tip-induced electric field as suggested by phase field simulation, the morphology of distorted rhombohedral variants has been delicately controlled and regulated. Such capabilities enable nanoscale control of magnetoelectric coupling in strain engineered BFO films that is difficult to achieve otherwise, as demonstrated by phase field simulations.
Resumo:
Geochemical,spectrographic, microbiological and hydrogeologic studies at the ORIFRC site indicate that groundwater transport in structured media may behave as a system of parallel flow tubes. These tubes are preferred flowpaths that enable contaminant transport parallel to bedding planes (strike) over distances of 1000s of meters. A significant flux of groundwater is focused within an interval defined by the interface between the competent bedrock and overlying highly-weathered saprolite, commonly referred to as the"transition zone." Characteristics of this transition zone are dense fractures and the relative absence of weathering products (e.g. clays)results in a significantly higher permeability compared to both the overlying clay-saprolite and underlying bedrock. Several stratabound low seismic velocity zones located below the transition zone were identified during geophysics studies and were also determined to be fractured high permeability preferred contaminant transport pathways during subsequent drilling activities. XANES analysis of precipitates collected from these deeper flow zones indicate 95% or more of the U deposited is U(VI). Linear combination fitting of the EXAFS data shows that precipitates are ~51±5% U(VI)-carbonate-like phase (e.g., liebigite) and ~49±5% U(VI) associated with an iron oxide phase; inclusion of a third component in the fit suggests that up to 15% of the U(VI) may be associated with a phosphate phase or OH- phase (e.g.,schoepite). Although precipitates with similar U(VI)-carbonate and/or phosphate associations were identified in the transition zone pathways,there were also U(VI) complexes adsorbed to mineral surfaces that would tend to be more readily mobilized. Groundwater in the different flow tubes has been determined to consist of different water quality types that vary with the solid phase encountered (e.g., clays, carbonates, clastics) as contaminants migrate along the flow paths. This lateral and vertical variability in geochemistry, particularly pH, has a significant impact on microbiological community composition and activity. Ribosomal RNA gene analyses coupled with physiological and genomic analyses suggest that bacteria from the genus Rhodanobacter(a diverse population of denitrifiers that are moderately acid tolerant) have a high relative abundance in the acidic source zone at the ORIFRC site.Watershed-scale analysis across different flow paths/tubes revealed strong negative correlation between pH and the absolute and relative abundance of Rhodanobacter. Recent studies also confirmed that the ORIFRC site hosts a diverse fungal community, with significant differences observed between acidic (pH <5) and circumneutral (>5) wells. The lack of nitrous oxide reduction capability in fungi, and the detection of denitrification potential in slurry microcosms suggest that fungi may have aheretofore under appreciated role in biogeochemical transformations, with implications forsite remediation and greenhouse gas emissions. Further research is needed to determine if these organisms can influence U(VI) mobility either directly through immobilization or indirectly through the depletion of nitrate.In conclusion, additional studies are required to quantify the processes (e.g., solid phase reactions, recharge, diffusion, microbial interactions) that are occurring along the groundwater flow tubes identified at the ORIFRC so predictive models can be parameterized and used to assess long-term contaminant fate and transport and remedial options.
Resumo:
Our earliest version of the Thomas Rymer story is the medieval romance Thomas off Ersseldoune (c.1430). There is a four hundred year lacuna before the ballad “Thomas Rymer”, our next surviving version, is recorded in the early 1800s. In the intervening time the narrative changed very little but the dynamic of the piece, radically. The romance transformed into the highly subversive ballad, “Thomas Rymer”. Central to this transformation is the reconceptualization of the romance's heroine. Referred to simply as the “lufly lady” and caught between her husband, the fay King, and a mere mortal, Thomas, she becomes in the ballad the powerful Queen of the Fairies. The ballad is structured around a series of revelations in which the enigmatic Queen assumes the roles of Eve and Mary, and finally Christ Himself. I will explore the implications of this extraordinary ballad. Moreover, I suggest that it is Queen Elizabeth herself who, ironically, enables the heroine's transformation. “Ironically” because it appears that it was Elizabeth's own restrictions, designed to suppress heretical, seditious or radical literature, which forced Thomas off Ersseldoune (and many other romances which employed religious imagery or figures) out of the written domain and into the oral tradition. And yet, it is Elizabeth who, in creating the image of herself as a female prince, as the Faerie Queen, inspires a new literary vocabulary designed to describe female executive power, without which it would have been impossible to imagine a figure such as the ballad's Queen of the Fairies.
Resumo:
This research aims to use the multivariate geochemical dataset, generated by the Tellus project, to investigate the appropriate use of transformation methods to maintain the integrity of geochemical data and inherent constrained behaviour in multivariate relationships. The widely used normal score transform is compared with the use of a stepwise conditional transform technique. The Tellus Project, managed by GSNI and funded by the Department of Enterprise Trade and Development and the EU’s Building Sustainable Prosperity Fund, involves the most comprehensive geological mapping project ever undertaken in Northern Ireland. Previous study has demonstrated spatial variability in the Tellus data but geostatistical analysis and interpretation of the datasets requires use of an appropriate methodology that reproduces the inherently complex multivariate relations. Previous investigation of the Tellus geochemical data has included use of Gaussian-based techniques. However, earth science variables are rarely Gaussian, hence transformation of data is integral to the approach. The multivariate geochemical dataset generated by the Tellus project provides an opportunity to investigate the appropriate use of transformation methods, as required for Gaussian-based geostatistical analysis. In particular, the stepwise conditional transform is investigated and developed for the geochemical datasets obtained as part of the Tellus project. The transform is applied to four variables in a bivariate nested fashion due to the limited availability of data. Simulation of these transformed variables is then carried out, along with a corresponding back transformation to original units. Results show that the stepwise transform is successful in reproducing both univariate statistics and the complex bivariate relations exhibited by the data. Greater fidelity to multivariate relationships will improve uncertainty models, which are required for consequent geological, environmental and economic inferences.
Resumo:
The application of the shape memory alloy NiTi in micro-electro-mechanical-systems (MEMSs) is extensive nowadays. In MEMS, complex while precise motion control is always vital. This makes the degradation of the functional properties of NiTi during cycling loading such as the appearance of residual strain become a serious problem to study, in particular for laser micro-welded NiTi in real applications. Although many experimental efforts have been put to study the mechanical properties of laser welded NiTi, surprisingly, up to the best of our understanding, there has not been attempts to quantitatively model the laser-welded NiTi under mechanical cycling in spite of the accurate prediction required in applications and the large number of constitutive models to quantify the thermo-mechanical behavior of shape memory alloys. As the first attempt to fill the gap, we employ a recent constitutive model, which describes the localized SIMT in NiTi under cyclic deformation; with suitable modifications to model the mechanical behavior of the laser welded NiTi under cyclic tension. The simulation of the model on a range of tensile cyclic deformation is consistent with the results of a series of experiments. From this, we conclude that the plastic deformation localized in the welded regions (WZ and HAZs) of the NiTi weldment can explain most of the extra amount of residual strain appearing in welded NiTi compared to the bare one. Meanwhile, contrary to common belief, we find that the ability of the weldment to memorize its transformation history, sometimes known as ‘return point memory’, still remains unchanged basically though the effective working limit of this ability reduces to within 6% deformation.
Resumo:
NiTi alloys have been widely used in the applications for micro-electro-mechanical-systems (MEMS), which often involve some precise and complex motion control. However, when using the NiTi alloys in MEMS application, the main problem to be considered is the degradation of functional property during cycling loading. This also stresses the importance of accurate prediction of the functional behavior of NiTi alloys. In the last two decades, a large number of constitutive models have been proposed to achieve the task. A portion of them focused on the deformation behavior of NiTi alloys under cyclic loading, which is a practical and non-negligible situation. Despite of the scale of modeling studies of the field in NiTi alloys, two experimental observations under uniaxial tension loading have not received proper attentions. First, a deviation from linearity well before the stress-induced martensitic transformation (SIMT) has not been modeled. Recent experiments confirmed that it is caused by the formation of stress-induced R phase. Second, the influence of the well-known localized Lüders-like SIMT on the macroscopic behavior of NiTi alloys, in particular the residual strain during cyclic loading, has not been addressed. In response, we develop a 1-D phenomenological constitutive model for NiTi alloys with two novel features: the formation of stress-induced R phase and the explicit modeling of the localized Lüders-like SIMT. The derived constitutive relations are simple and at the same time sufficient to describe the behavior of NiTi alloys. The accumulation of residual strain caused by R phase under different loading schemes is accurately described by the proposed model. Also, the residual strain caused by irreversible SIMT at different maximum loading strain under cyclic tension loading in individual samples can be explained by and fitted into a single equation in the proposed model. These results show that the proposed model successfully captures the behavior of R phase and the essence of localized SIMT.
Resumo:
Several lines of evidence indicate that the adapter molecule p130CAS (crk-associated substrate (CAS)) is required for src-mediated cellular transformation. CAS has been shown to be heavily tyrosine-phosphorylated in src-transformed cells, and genetic variants of src that are deficient in CAS binding are also unable to mediate cellular transformation. In this report, we investigated whether CAS phosphorylation and/or its association with src are required elements of the transformation process. Expression of the carboxy-terminal src binding domain of CAS in Rat 1 fibroblasts expressing a temperature-sensitive allele of v-src inhibited the formation of src-CAS complexes and also inhibited tyrosine phosphorylation of CAS. However, expression of this protein had no effect on morphological transformation, src-mediated actin rearrangements, or anchorage-independent growth of these cells when grown at the src-permissive temperature. Thus, the ability of activated src to mediate cellular transformation is either largely independent of endogenous CAS phosphorylation and/or its association with CAS or, alternatively, the carboxy-terminus of CAS may substitute for endogenous CAS in the process of src-mediated transformation.
Resumo:
Adaptor proteins play an important role in signal transduction by regulating the establishment and maintenance of functionally important protein complexes. A recently described member of this group of proteins is p130cas (CAS), which contains numerous sequence motifs predicted to be involved in mediating protein-protein interactions. We propose that adaptor molecules like CAS may help determine the response of a cell to a particular signal by interacting with specific subsets of cellular proteins. To test this hypothesis, we have identified potential binding partners of CAS that may play a rote in cellular transformation by the oncoproteins v-SRC and/or v-CRK. We show that individual domains of CAS associate with specific subsets of proteins in vitro, and that many of these interactions are dependent on the state of tyrosine-phosphorylation of CAS. Sequences necessary for interacting with the focal adhesion kinase pp125FAK (FAK), v-SRC and v-CRK have been mapped to distinct regions of CAS. In addition, the identification of a number of putative CAS-binding partners that are present in crk-transformed cell extracts but undetectable in normal and src-transformed cell extracts supports a model in which unique protein complexes are formed in response to different signals.
Resumo:
Nanomechanical response of a silicon specimen coated with a sp3 crystalline carbon coating (1.8 nm thickness) was investigated using MD simulation. A sharp conical rigid tip was impacted at the speed of 50 m/sec up to a depth of ~80% of the coating thickness. Unlike pure silicon specimen, no metallic phase transformation was observed i.e. a thin coating was able to resist Si-I to Si-II metallic phase transformation signifying that the coating could alter the stress distribution and thereby the contact tribology of the substrate. The stress state of the system, radial distribution function and the load-displacement curve were all aligned with above observations
Resumo:
Since 11 September 2001, the religious dimension of conflict has been the focus of increasing attention. In The Clash of Civilizations, Huntington has identified the West in religious-cultural terms, as Christian with a dominant democratic culture emphasizing tolerance, moderation and consensus. The persistence of conflict in Northern Ireland among 'White' Protestant and Catholic Christians undermines this simplistic argument and demands a more subtle understanding of the role of religion and fundamentalism in contemporary conflict. Modernization theory - which is echoed among some theorists of globalization - had predicted the declining importance of religion as the world became industrialized and increasingly interconnected. This is echoed by those who argue that the Northern Ireland conflict is 'ethno-national' and dismiss the role of religion. On the other hand, others have claimed that the conflict is religious and stress the role of Protestant fundamentalism. This article draws on new evidence from Northern Ireland of the complex and subtle ways in which religion impacts on the conflict there, incorporating insights about the pragmatism of fundamentalist Protestants and how religious actors are contributing to conflict transformation. This analysis leads to three broader conclusions about understanding conflicts with religious dimensions. First, the complexity of religion must be understood, and this includes a willingness to recognize the adaptability of fundamentalisms to particular contexts. Second, engaging with fundamentalists and taking their grievances seriously opens up possibilities for conflict transformation. Third, governments and religious actors within civil society can play complementary roles in constructing alternative (religious) ideologies and structures as part of a process of transformation. In a world in which the impact of religion is persistent, engaging with the religious dimension is a vital part of a broader-based strategy for dealing with conflict. © 2008 Journal of Peace Research.
Resumo:
A number of Christian churches in South Africa have proclaimed their commitment to reconciliation and the elimination of unjust inequalities. This study analyses how these commitments are being worked out at the micro-level of a congregation. Using an ethnographic approach, I explore how a charismatic congregation in Cape Town has changed from being nearly all-white to being more inclusive. I explore links between individual, cognitive identity change and institutional change; and consider the discourses which justify change, including their emphasis on 'unity in diversity' and 'restitution'. I outline the limitations of change, including the persistence of 'racialised' leadership structures and the discursive privileging of unity over restitution. This allows us to understand how micro-level changes take place, to explore their potentialities and limitations, and to apply these insights to other contexts.