Thermomechanical Response of Variable Stiffness Composite Panels

Analysis of non-traditional Variable Stiffness (VS) laminates, obtained by steering the fiber orientation as a spatial function of location, have shown to improve buckling load carrying capacity of flat rectangular panels under axial compressive loads. In some cases the buckling load of simply supported panels doubled compared to the best conventional laminate with straight fibers. Two distinct cases of stiffness variation, one due to fiber orientation variation in the direction of the loading, and the other one perpendicular to the loading direction, were identified as possible contributors to the buckling load improvements. In the first case, the increase was attributed to the favorable distribution of the transverse in-plane stresses over the panel platform. In the second case, a higher degree of improvement was obtained due to the re-distribution of the applied in-plane loads. Experimental results, however, showed substantially higher levels of buckling load improvements compared with theoretical predictions. The additional improvement was determined to be due to residual stresses introduced during curing of the laminates. The present paper provides a simplified thermomechanical analysis of residual stress state of variable stiffness laminates. Systematic parametric analyses of both cases of fiber orientation variations show that, indeed much higher buckling loads could result from the residual stresses present in such laminates.

Transient Heat Conduction of Variable Stiffness Composite Laminate

Recent research on Variable Stiffness (VS) laminates, which are constructed by steering the fiber orientation as a spatial function of location, have shown to improve laminate performance under mechanical loads. Two distinct cases of stiffness variation can be achieved either by variation of the fiber orientation in the direction of the global x-axis, or perpendicular to it. In the present paper, thermal analysis of a VS laminate is performed to study the effect of steering fibers on transient heat conduction under uniform heat flux using finite element method. The goal of the present paper is a parametric study of the effect of variable stiffness properties on transient response including time to reach steady state and temperature profile. Also, stress resultants and maximum stress location are investigated under different boundary conditions. A FEM algorithm is applied to exactly incorporate the boundary conditions for stress resultant analysis.

Transient Heat Conduction of Variable Stiffness Composite Laminate

Recent research on Variable Stiffness (VS) laminates, which are constructed by steering the fiber orientation as a spatial function of location, have shown to improve laminate performance under mechanical loads. Two distinct cases of stiffness variation can be achieved either by variation of the fiber orientation in the direction of the global x-axis, or perpendicular to it. In the present paper, thermal analysis of VS laminate is performed to study the effect of steering fibers on transient heat conduction under uniform heat flux using finite element method. The goal of the present paper is a parametric study of the
effect of variable stiffness properties on transient response including time to reach steady state and temperature profile. Also, stress resultants and maximum stress location are investigated under different boundary conditions. A FEM algorithm is applied to exactly incorporate the boundary conditions.

Multiple Luminaire Identification in Airborne Images of Airport’s Approach Lighting Using Mathematical Morphology With Variable Length Structuring Element

The increasing demand for fast air transportation around the clock
has increased the number of night flights in civil aviation over
the past few decades. In night aviation, to land an aircraft, a
pilot needs to be able to identify an airport. The approach
lighting system (ALS) at an airport is used to provide
identification and guidance to pilots from a distance. ALS
consists of more than $100$ luminaires which are installed in a
defined pattern following strict guidelines by the International
Civil Aviation Organization (ICAO). ICAO also has strict
regulations for maintaining the performance level of the
luminaires. However, once installed, to date there is no automated
technique by which to monitor the performance of the lighting. We
suggest using images of the lighting pattern captured using a camera
placed inside an aircraft. Based on the information contained
within these images, the performance of the luminaires has to be
evaluated which requires identification of over $100$ luminaires
within the pattern of ALS image. This research proposes analysis
of the pattern using morphology filters which use a variable
length structuring element (VLSE). The dimension of the VLSE changes
continuously within an image and varies for different images.
A novel
technique for automatic determination of the VLSE is proposed and
it allows successful identification of the luminaires from the
image data as verified through the use of simulated and real data.

Variable selection via RIVAL and its application in nuclear material detection

In many situations, the number of data points is fixed, and the asymptotic convergence results of popular model selection tools may not be useful. A new algorithm for model selection, RIVAL (removing irrelevant variables amidst Lasso iterations), is presented and shown to be particularly effective for a large but fixed number of data points. The algorithm is motivated by an application of nuclear material detection where all unknown parameters are to be non-negative. Thus, positive Lasso and its variants are analyzed. Then, RIVAL is proposed and is shown to have some desirable properties, namely the number of data points needed to have convergence is smaller than existing methods.

An Experimental Assessment of the Effects of Stator Vane Tip Clearance and Back Swept Blading on an Automotive Variable Geometry Turbocharger

Off-design performance is of key importance now in the design of automotive turbocharger turbines. Due to automotive drive cycles, a turbine that can extract more energy at high pressure ratios and lower rotational speeds is desirable. Typically a radial turbine provides peak efficiency at U/C values of 0.7, but at high pressure ratios and low rotational speeds, the U/C value will be low and the rotor will experience high values of positive incidence at the inlet. The positive incidence causes high blade loading resulting in additional tip leakage flow in the rotor as well as flow separation on the suction surface of the blade. An experimental assessment has been performed on a scaled automotive VGS (variable geometry system). Three different stator vane positions have been analyzed: minimum, 25%, and maximum flow position. The first tests were to establish whether positioning the endwall clearance on the hub or shroud side of the stator vanes produced a different impact on turbine efficiency. Following this, a back swept rotor was tested to establish the potential gains to be achieved during off-design operation. A single passage CFD model of the test rig was developed and used to provide information on the flow features affecting performance in both the stator vanes and turbine. It was seen that off-design performance was improved by implementing clearance on the hub side of the stator vanes rather than on the shroud side. Through CFD analysis and tests, it was seen that two leakage vortices form, one at the leading edge and one after the spindle of the stator vane. The vortices affect the flow angle at the inlet to the rotor, in the hub region. The flow angle is shifted to more negative values of incidence, which is beneficial at the off-design conditions but detrimental at the design point. The back swept rotor was tested with the hub side stator vane clearance configuration. The efficiency and MFR were increased at the minimum and 25% stator vane position. At the design point, the efficiency and MFR were decreased. The CFD investigation showed that the incidence angle was improved at the off-design conditions for the back swept rotor. This reduction in the positive incidence angle, along with the improvement caused by the stator vane tip leakage flow, reduced flow separation on the suction surface of the rotor. At the design point, both the tip leakage flow of the stator vanes and the back swept blade angle caused flow separation on the pressure surface of the rotor. This resulted in additional blockage at the throat of the rotor reducing MFR and efficiency.

The impact of nonadherence to inhaled long-acting β - adrenoceptor agonist/corticosteroid combination therapy on healthcare costs in difficult-to-control asthma

Background: Asthma is a leading, preventable cause of morbidity, mortality and cost. A disproportionate amount of the cost is generated by the 5-10%of patients with difficult-to-control asthma, who are prescribed treatment at step 4/5 of the Global Initiative for Asthma (GINA) guidelines. We have previously demonstrated a high prevalence of nonadherence to inhaled combination therapy (i.e. long-acting ß -adrenoceptor agonist [ß - agonist] and corticosteroid) in this population. The aim of this study was to examine the costs of healthcare utilization in a nonadherent group of patients with difficult-to-control asthma compared with adherent subjects. We also wished to examine potential savings if nonadherence to inhaled combination therapy could be addressed. All costs were measured from the perspective of a publicly funded health service Methods: Adherence was determined through examination of patient prescription refill behaviour and validated with a medical concordance interview. Data on healthcare use were collected from a patient survey and hospital records that included prescribed medicines, hospital admissions, intensive care unit (ICU) admissions and other unscheduled healthcare visits associated with asthma care. Activity was monetized using standard UK references and between-group comparisons based on a series of univariate and multivariate regression analyses. Results: Cost differences were identified for inhaled combination therapy, nebulizer, short acting b2-agonists and hospital costs excluding and including ICU admissions between adherent and nonadherent subjects. Compared with a group who have refractory asthma and who are adherent with medication, additional healthcare costs in nonadherent subjects are offset by the reduction in costs associated with reduced medication utilization. However, if nonadherence can be successfully targeted and hospital admissions avoided in this population, there is a potential $475 ($843-$368) saving per patient, per annum. Conclusion: Nonadherence is an important cause of difficult-to-control asthma. A uniform cost for subjects with difficult-to-control disease can be applied to economic analyses, independent of adherence, as increased healthcare utilization costs are offset by the reduced medication cost due to poor adherence. However, there are substantial potential savings in subjects with difficult-to-control asthma, who are nonadherent to inhaled combination therapy, if cost effective strategies for nonadherence are developed. © 2011 Adis Data Information BV. All rights reserved.

Hidden costs of control: four repetitions and an extension

We report four repetitions of Falk and Kosfeld's (Am. Econ. Rev. 96(5):1611-1630, 2006) low and medium control treatments with 476 subjects. Each repetition employs a sample drawn from a standard subject pool of students and demographics vary across samples. We largely confirm the existence of hidden costs of control but, contrary to the original study, hidden costs of control are usually not substantial enough to significantly undermine the effectiveness of economic incentives. Our subjects were asked, at the end of the experimental session, to complete a questionnaire in which they had to state their work motivation in hypothetical scenarios. Our questionnaires are identical to the ones administered in Falk and Kosfeld's (Am. Econ. Rev. 96(5):1611-1630, 2006) questionnaire study. In contrast to the game play data, our questionnaire data are similar to those of the original questionnaire study. In an attempt to solve this puzzle, we report an extension with 228 subjects where performance-contingent earnings are absent i.e. both principals and agents are paid according to a flat participation fee. We observe that hidden costs significantly outweigh benefits of control under hypothetical incentives.

MODELING TRENDS IN SOCIAL FLUIDITY - THE CORE MODEL AND A MEASURED-VARIABLE APPROACH COMPARED

In this paper we employ Erikson and Goldthorpe's core model of social fluidity and a 'measured variable' approach to analyse trends in social mobility among men in the Republic of Ireland. Our analyses provide no evidence that the changes associated with industrialization have led to the increases in social fluidity predicted by the liberal theory of industrialism. The measured-variable approach we employ consistently provides a better fit to the Irish data than the core model. The application of the former model points to a degree of importance of the hierarchy dimension which is not captured adequately by the core model. It also suggests that the well-known distinctiveness of the Irish social mobility regime is open to explanation in terms of general dimensions rather than the peculiarities of the Irish case.

Estimating the costs of medicalization

Medicalization is the process by which non-medical problems become defined and treated as medical problems, usually as illnesses or disorders. There has been growing concern with the possibility that medicalization is driving increased health care costs. In this paper we estimate the medical spending in the U.S. of identified medicalized conditions at approximately 77 billion in 2005, 3.9% of total domestic expenditures on health care. This estimate is based on the direct costs associated with twelve medicalized conditions. Although due to data limitations this estimate does not include all medicalized conditions, it can inform future debates about health care spending and medicalization.

Defective B cell response to TLR9 ligand (CpG-ODN), Streptococcus pneumoniae and Haemophilus influenzae extracts in common variable immunodeficiency patients

Common variable immunodeficiency (CVID) is a primary immunodeficiency characterized by hypogammaglobulinaemia and antibody deficiency to both T dependent and independent antigens. Patients suffer from recurrent sinopulmonary infections mostly caused by Streptococcus pneumoniae and Haemophilus influenzae, but also gastrointestinal or autoimmune symptoms. Their response to vaccination is poor or absent. In this study we investigated B cell activation induced by the TLR9 specific ligand (CpG-ODN) and bacterial extracts from S. pneumoniae and H. influenzae known to stimulate several TLR. We found that B cells from CVID patients express lower levels of CD86 after stimulation with CpG-ODN, S. pneumoniae and H. influenzae extracts in combination with anti-IgM antibody and also display a lower proliferative index when stimulated with bacterial extracts. Our results point to a broad TLR signalling defect in B lymphocytes from CVID patients that may be related to the hypogammaglobulinaemia and poor response to vaccination characteristic of these patients.

Resource utilisation and costs of palliative cancer care in an interdisciplinary health care model

This paper presents a detailed description of health care resource utilisation and costs of a pilot interdisciplinary health care model of palliative home care in Ontario, Canada. The descriptive evaluation entailed examining the use of services and costs of the pilot program: patient demographics, length of stay broken down by disposition (discharged, alive, death), access to services/resources, use of family physician and specialist services, and drug use. There were 434 patients included in the pilot program. Total costs were approximately CAN$2.4 million, and the cost per person amounted to approximately CAN$5586.33 with average length of stay equal to over 2 months (64.22 days). One may assume that length of stay would be influenced by the amount of service and support available. Future research might investigate whether in-home palliative home care is the most cost effective and suitable care setting for those patients requiring home care services for expected periods of time. © 2009 SAGE Publications.