Effect of microstructure on the fatigue properties of Ti-6Al-4V titanium alloys

Through an analysis on microstructure and high cycle fatigue (HCF) properties of Ti-6Al-4V alloys which were selected from literature, the effects of microstructure types and microstructure parameters on HCF properties were investigated systematically. The results show that the HCF properties are strongly determined by microstructure types for Ti-6Al-4V. Generally the HCF strengths of different microstructures decrease in the order of bimodal, lamellar and equiaxed microstructure. Additionally, microstructure parameters such as the primary a (a) content and the a grain size in bimodal microstructures, the a lamellar width in lamellar microstructure and the a grain size in equiaxed microstructures, can influence the HCF properties. © 2012 Elsevier Ltd.

Effect of simvastatin on physiological and biological outcomes in patients undergoing esophagectomy: a randomised placebo controlled trial

OBJECTIVE: To test whether simvastatin improves physiological and biological outcomes in patients undergoing esophagectomy.

BACKGROUND: One-lung ventilation during esophagectomy is associated with inflammation, alveolar epithelial and systemic endothelial injury, and the development of acute lung injury (ALI). Statins that modify many of the underlying processes are a potential therapy to prevent ALI.

METHODS: We conducted a randomized double-blind placebo-controlled trial in patients undergoing esophagectomy. Patients received simvastatin 80 mg or placebo enterally for 4 days preoperatively and 7 days postoperatively. The primary end point was pulmonary dead space (Vd/Vt) at 6 hours after esophagectomy or before extubation. Inflammation was assessed by plasma cytokines and intraoperative exhaled breath condensate pH; alveolar type 1 epithelial injury was assessed by plasma receptor for advanced glycation end products and systemic endothelial injury by the urine albumin-creatinine ratio.

RESULTS: Thirty-nine patients were randomized; 8 patients did not undergo surgery and were excluded. Fifteen patients received simvastatin and 16 received placebo. There was no difference in Vd/Vt or other physiological outcomes. Simvastatin resulted in a significant decrease in plasma MCP-1 on day 3 and reduced exhaled breath condensate acidification. Plasma receptor for advanced glycation end products was significantly lower in the simvastatin-treated group, as was the urine albumin-creatinine ratio on day 7 postsurgery. ALI developed in 4 patients in the placebo group and no patients in the simvastatin group although this difference was not statistically significant (P = 0.1).

CONCLUSIONS: In this proof of concept study, pretreatment with simvastatin in esophagectomy decreased biomarkers of inflammation as well as pulmonary epithelial and systemic endothelial injury.

The buffering effect of hope on clinicians' behavior:A test in pediatric primary care

Although trait hope is thought to motivate goal-directed actions in the face of impediments, few studies have directly examined hope's role in overcoming obstacles, and none have done so while accounting for related goal constructs. We describe a study of 127 pediatric primary care providers who over the course of a year were asked to identify new cases of asthma and confirm previously diagnosed active disease by completing for each of their patients a brief survey validated for this purpose. These clinicians also completed measures of hope, self-efficacy, conscientiousness, and perceived obstacles to implementing a pediatric asthma management program. As predicted by hope theory, the agency component of hope buffered clinicians from perceived obstacles by facilitating the identification of asthma cases among high-hope clinicians in the face of obstacles. This buffering effect remained after controlling for self-efficacy and conscientiousness. We discuss the study findings in terms of current theories of goal-directed behavior and implications for delivering hope-related interventions, and we offer a testable hypothesis regarding when agency and pathways thinking facilitate goal-related behavior.

Effect of defects on optical phonon Raman spectra in SiC nanorods

Fabricated one-dimensional (1D) materials often have abundant structural defects. Experimental observation and numerical calculation indicate that the broken translation symmetry due to structural defects may play a more important role than the quantum confinement effect in the Raman features of optical phonons in polar semiconductor quantum wires such as SiC nanorods, (C) 1999 Elsevier Science Ltd. All rights reserved.

Effect of pH on the in vitro susceptibility of planktonic and biofilm-grown Proteus mirabilis to the quinolone antimicrobials

To examine the effect of elevated pH, as reported during urinary catheter infections, on quinolone activity against the urease-producing pathogen Proteus mirabilis.

Effect of acarbose on biochemical responses and clinical symptoms in dumping syndrome

A dose of 50 mg of acarbose was administered with a standard breakfast to 13 subjects with dumping syndrome. Significant attenuation of hyperglycaemia (p less than 0.01) was observed, and rises in plasma gastric inhibitory polypeptide, insulin and enteroglycagon were reduced (p less than 0.05). Plasma levels of neurotensin, vasoactive intestinal polypeptide and somatostatin were not affected. Dumping score was reduced, but this did not achieve statistical significance. In a longer-term study, 9 patients took acarbose, 50 mg t.i.d., for 1 month. No significant reduction in the number or severity of dumping attacks was observed, but a majority expressed a preference for the drug and some individuals experienced a marked improvement of symptoms.

Effect of diet on vascular health

Summary Cardiovascular disease (CVD) is a major cause of morbidity and mortality in the Western world in older people. Diet and lifestyle change can reduce CVD risk in older people, and this evidence base is reviewed. For example, diets low in trans fats can reduce CVD risk, while for saturated fats the CVD-lowering effect depends on what is substituted for the saturated fat. Diets rich in fish reduce CVD risk, although n-3 supplements have not been shown to have a consistent effect on CVD end-points. Antioxidant and B-group vitamin supplementation are unlikely to reduce CVD risk, but diets rich in these micronutrients (e.g. rich in fruits and vegetables and the Mediterranean diet) are associated with lower CVD risk, while, for the Mediterranean diet, this has been supported by randomized controlled trials. Maintaining a healthy weight and being physically active reduce CVD risk factors and CVD incidence and mortality. © 2013 Cambridge University Press.

The effect of choice on motivation for young children on the autism spectrum during discrete trial teaching

Self-determination and decision-making are acknowledged internationally as key rights of persons with disabilities and should play an important role in the development of educational plans and procedures. Not only is the chance for individuals with developmental disabilities to select their own tasks, leisure activities or reinforcers a valuable way of enhancing rights-based education and personal dignity, but choice-making opportunities may also function as a useful clinical or educational tool if they actually improve the efficacy of programmes aimed at the acquisition of socially relevant behaviours and life skills or the reduction of challenging behaviours.

The study reported here assessed whether or not choice affected effectiveness of an educational procedure for three children on the autism spectrum. Following a preference assessment, a number of discrete teaching trials were conducted with each child and, contingent upon targeted responses, either the child or the therapist selected one of three preferred reinforcer items. Reinforcer choice did not affect intervention effectiveness for two of the children; however, performance and motivation improved for the third child. Results re-affirmed the importance of thorough preference assessments prior to intervention and showed that additional stimulus choice contingent on the target response may improve motivation and outcomes for some children.

Effect of fretting on fatigue performance of Ti-1023 titanium alloy

The plain fatigue and fretting fatigue tests of Ti-1023 titanium alloy were performed using a high-frequency push-pull fatigue testing machine. Both σmax versus number of cycles to failure curves were obtained for comparative analysis of the fretting effect on fatigue performance of the titanium alloy. Meanwhile, by analyzing the fracture of plain fatigue and fretting fatigue, the fretting scar and the fretting debris observed by scanning electron microscopy (SEM), the mechanism of fretting fatigue failure of Ti-1023 titanium alloy is discussed. The fretting fatigue strength of Ti-1023 titanium alloy is 175 MPa under 10 MPa contact pressure, which is 21% of plain fatigue strength (836 MPa). Under fretting condition, the Ti-1023 titanium alloy fatigue fracture failure occurs in a shorter fatigue life. When it comes to σmax versus number of cycles to failure curves, data points in the range of 106–107 cycles under plain fatigue condition moved to the range of 105–106 under fretting fatigue condition. The integrity of the fatigue specimen surface was seriously damaged under the effect of fretting. With the alternating stress loaded on specimen, the stress concentrated on the surface of fretting area, which brought earlier the initiation and propagation of crack.

Effect of shotpeening on sliding wear and tensile behavior of titanium implant alloys

Titanium has good biocompatibility and so its alloys are used as implant materials, but they suffer from having poor wear resistance. This research aims to improve the wear resistance and the tensile strength of titanium alloys potentially for implant applications. Titanium alloys Ti–6Al–4V and Ti–6Al–7Nb were subjected to shotpeening process to study the wear and tensile behavior. An improvement in the wear resistance has been achieved due to surface hardening of these alloys by the process of shotpeening. Surface microhardness of shotpeened Ti–6Al–4V and Ti–6Al–7Nb alloys has increased by 113 and 58 HV(0.5), respectively. After shotpeening, ultimate tensile strength of Ti–6Al–4V increased from 1000 MPa to 1150 MPa, higher than improvement obtained for heat treated titanium specimens. The results confirm that shotpeening pre-treatment improved tensile and sliding wear behavior of Ti–6Al–4V and Ti–6Al–7Nb alloys. In addition, shotpeening increased surface roughness.