The modification of PLA and PLGA using electron-beam radiation

The degradable polymers polylactide (PLA) and polylactide-co-glycolide (PLGA) have found widespread use in modern medical practice. However, their slow degradation rates and tendency to lose strength before mass have caused problems. The aim of this study was to ascertain whether treatment with e-beam radiation could address these problems. Samples of PLA and PLGA were manufactured and placed in layered stacks, 8.1 mm deep, before exposure to 50 kGy of e-beam radiation from a 1.5 MeV accelerator. Gel permeation chromatography testing showed that the molecular weight of both materials was depth-dependent following irradiation, with samples nearest to the treated surface showing a reduced molecular weight. Samples deeper than 5.4 mm were unaffected. Computer modeling of the transmission of a 1.5 MeV e-beam in these materials corresponded well with these findings. An accelerated mass-loss study of the treated materials found that the samples nearest the irradiated surface initiated mass loss earlier, and at later stages showed an increased percentage mass loss. It was concluded that e-beam radiation could modify the degradation of bioabsorbable polymers to potentially improve their performance in medical devices, specifically for improved orthopedic fixation.

Accelerated degradation behaviour of poly(epsilon-caprolactone) via melt blending with poly(aspartic acid-co-lactide) (PAL)

Poly(epsilon-caprolactone) (PCL) has many favourable attributes for tissue engineering scaffold applications. A major drawback, however, is its slow degradation rate, typically greater than 3 years. In this study PCL was melt blended with a small percentage of poly(aspartic acid-co-lactide) (PAL) and the degradation behaviour was evaluated in phosphate buffer solution (PBS) at 37 degrees C. The addition of PAL was found to significantly enhance the degradation profile of PCL. Subsequent degradation behaviour was investigated in terms of the polymer's mechanical properties, Molecular weight (M-w), mass changes and thermal characteristics. The results indicate that the addition of PAL accelerates the degradation of PCL, with 20% mass loss recorded after just 7 months in vitro for samples containing 8 wt% PAL. The corresponding pure PCL samples exhibited no mass loss over the same time period. In vitro assessment of PCL and PCL/PAL composites in tissue Culture medium in the absence of cells revealed stable pH readings with time. SEM studies of cell/biomaterial interactions demonstrated biocompatibility of C3H10T1/2 cells with PCL and PCL/PAL composites at all concentrations of PAL additive. (C) 2008 Elsevier Ltd. All rights reserved.

Concordant Association of Insulin Degrading Enzyme Gene (IDE) Variants with IDE mRNA, A beta, and Alzheimer's Disease

Background: The insulin-degrading enzyme gene (IDE) is a strong functional and positional candidate for late onset Alzheimer's disease (LOAD).

Through-thickness control of polymer bioresorption via electron beam irradiation

Predicable and controlled degradation is not only central to the accurate delivery of bioactive agents and drugs, it also plays a vital role in key aspects of bone tissue engineering. The work addressed in this paper investigates the utilisation of e-beam irradiation in order to achieve a controlled (surface) degradation profile. This study focuses on the modification of commercially and clinically relevant materials, namely poly(L-lactic acid) (PLLA), poly(L-lactide-hydroxyapatite) (PLLA-HA), poly(L-lactide-glycolide) co-polymer (PLG) and poly(L-lactide-DL-lactide) co-polymer (PLDL). Samples were subjected to irradiation treatments using a 0.5 MeV electron beam with delivered surface doses of 150 and 500 kGy. In addition, an acrylic attenuation shield was used for selected samples to control the penetration of the e-beam. E-beam irradiation induced chain scission in all polymers, as characterized by reduced molecular weights and glass transition temperatures (T-g). Irradiation not only produced changes in the physical properties of the polymers but also had associated effects on surface erosion of the materials during hydrolytic degradation. Moreover, the extent to which both mechanical and hydrolytic degradation was observed is synonymous with the estimated penetration of the beam (as controlled by the employment of an attenuation shield). (C) 2010 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Beyond the shadow space: architecture as a professional and creative process; during and post-conflict.

Introduction

Much has been written about the impact of conflict on the physical nature of cities; most obviously perhaps the damage, destruction, defensive construction and spatial reconfigurations that evolve in times of conflict. Set within the context of Belfast, Northern Ireland, this paper will focus on three areas. First, a closer reading of the long-term physical impact of conflict, in particular, the spatial forms and practices that persist conceptually and culturally, and/or resist re-conceptualisation. Secondly, the effect of conflict on the nature of architectural practice itself, considering whether issues such as appointment and procurement impacted on architectural expectation and the context of operation. Thirdly, the effect of conflict on people, in particular in relation to creativity and hence the psyche of practice itself. This section will also identify the conditions that undermine or support design quality and creativity not only within times of conflict but also as society evolves out of the shadow space. 1
Twelve years on from the Peace Agreement,2 it may seem remarkable from an external perspective that Northern Ireland still needs to be reflecting on its troubled past. But the immediate post-conflict phase offered the communities of Northern Ireland place and time to experience ‘normal life’, begin to reconcile themselves to the hurt they experienced and start to reconfigure their relationships to one another. Indeed, it has often been expressed that probing the issues too much, at too early a phase, might in fact ‘Open old wounds without resolving anything’ and/or ‘Destabilise the already fragile political system.’3 This tendency not to deliberate or be too probing is therefore understandable and might be the reason why, for example, Northern Ireland's first Architecture and Built Environment policy, published in June, 2006, contains only one routine reference to ‘the Troubles’.

Clearly, however, there is a time in the development of a healthy, functioning society, when in order effectively to plan its future, it must also carry out a closer reading and deeper understanding of its past. As Maya Angelou puts it, ‘History, despite its wrenching pain/ Cannot be unlived, and if faced/ With courage, need not be lived again.’4

Increasingly, those within the creative arts sector and the built environment professions are showing interest in carrying out that closer reading, teasing out issues around conflict. This was led in part by the recent publication of the Troubles Archive by the Arts Council of Northern Ireland.5 Those involved in the academic or professional development of future generations of architects are also concerned about the relevance of a post-conflict condition. As a profession, if architects purport to be concerned with context, then the almost tangible socio-political circumstances and legacy of Northern Ireland does inevitably require direct eye contact. This paper therefore aims to bring the relationship between conflict and architectural practice in Northern Ireland into sharp focus, not to constrain or dull creative practice but to heighten its potential.

Surface modification of poly(ε-caprolactone) using a dielectric barrier discharge in atmospheric pressure glow discharge mode

The role of roughening and functionalization processes involved in modifying the wettability of poly(e-caprolactone) (PCL) after treatment by an atmospheric pressure glow discharge plasma is discussed. The change in the ratio of Cdouble bond; length as m-dashO/C–O bonds is a significant factor influencing the wettability of PCL. As the contact angle decreases, the level of Cdouble bond; length as m-dashO bonds tends to rise. Surface roughness alterations are the driving force for lasting increases in wettability, while the surface functional species are shorter lived. We can approximate from ageing that the increase in wettability for PCL after plasma treatment is 55–60% due to roughening and 40–45% due to surface functionalization for the plasma device investigated.

Electronically controlled surface plasmon dispersion and optical transmission through metallic hole arrays using liquid crystal.

The enhanced optical properties of metal films periodically perforated with an array of sub-wavelength size holes have recently been widely studied in the field of surface plasmon optics. The ability to design the optical transmission of such nanostructures, which act as plasmonic crystals, by varying their geometrical parameters gives them great flexibility for numerous applications in photonics, opto-electronics, and sensing. Transforming these passive optical elements into devices that may be actively controlled has presented a new challenge. Here, we report on the realization of an electrically controlled nanostructured optical system based on the unique properties of surface plasmon polaritonic crystals in contact with a liquid crystal (LC) layer. We discuss the effect of LC layer modulation on the surface plasmon dispersion, the related optical transmission and the underlying mechanism. The reported effect may be used to achieve active spectral tuneability and switching in a wide range of applications.

HoxA cluster is haploinsufficient for activity of hematopoietic stem and progenitor cells

Functional compensation between homeodomain proteins has hindered the ability to unravel their role in hematopoiesis using single gene knockouts. Because HoxB genes are dispensable for hematopoiesis, and most HoxA genes are expressed an order of magnitude higher than other cluster genes in hematopoietic stem cell (HSC)-enriched populations, we hypothesize that maintenance of HoxA cluster expression is important for adult hematopoiesis and that global decrease of HoxA gene expression levels affects steady-state hematopoiesis.

Differential Hox Expression in Murine Embryonic Stem Cell Models of Normal and Malignant Hematopoiesis.

The Hox family are master transcriptional regulators of developmental processes, including hematopoiesis. The Hox regulators, caudal homeobox factors (Cdx1-4), and Meis1, along with several individual Hox proteins, are implicated in stem cell expansion during embryonic development, with gene dosage playing a significant role in the overall function of the integrated Hox network. To investigate the role of this network in normal and aberrant, early hematopoiesis, we employed an in vitro embryonic stem cell differentiation system, which recapitulates mouse developmental hematopoiesis. Expression profiles of Hox, Pbx1, and Meis1 genes were quantified at distinct stages during the hematopoietic differentiation process and compared with the effects of expressing the leukemic oncogene Tel/PDGFRß. During normal differentiation the Hoxa cluster, Pbx1 and Meis1 predominated, with a marked reduction in the majority of Hox genes (27/39) and Meis1 occurring during hematopoietic commitment. Only the posterior Hoxa cluster genes (a9, a10, a11, and a13) maintained or increased expression at the hematopoietic colony stage. Cdx4, Meis1, and a subset of Hox genes, including a7 and a9, were differentially expressed after short-term oncogenic (Tel/PDGFRß) induction. Whereas Hoxa4-10, b1, b2, b4, and b9 were upregulated during oncogenic driven myelomonocytic differentiation. Heterodimers between Hoxa7/Hoxa9, Meis1, and Pbx have previously been implicated in regulating target genes involved in hematopoietic stem cell (HSC) expansion and leukemic progression. These results provide direct evidence that transcriptional flux through the Hox network occurs at very early stages during hematopoietic differentiation and validates embryonic stem cell models for gaining insights into the genetic regulation of normal and malignant hematopoiesis.