Study of fibre distribution and orientations in UHPFRC by electrical resistivity and mechanical tests

This paper presents experimental tests carried out on steel fibre reinforced concrete samples, including mechanical tests as well as non-destructive technique (electrical resistivity) and non destructive technique on cores (X-ray). Electrical resistivity measurements are done as a blind test, to characterise the electrical anisotropy and deduce the distribution and the orientation of fibres. These results are compared to X-ray imaging to check the quality of the non destructive evaluation. Then, flexural and compressive strength are measured on specimens to assess the influence of fibre distribution on the concrete properties.

Cold-formed steel sections with web openings subjected to web crippling under two-flange loading conditions - part I: Tests and finite element analysis

The results of 82 web crippling tests are presented, with 20 tests conducted on channel sections without web openings and 62 tests conducted on channel sections with web openings. The tests consider both end-two-flange and interior-two-flange loading conditions. In the case of the tests with web openings, the hole was located directly under the concentrated load. The concentrated load was applied through bearing plates; the effect of different bearing lengths is investigated. In addition, the cases of both flanges fastened and unfastened to the support is considered. A non-linear elasto-plastic finite element model is described, and the results compared against the laboratory test results; a good agreement was obtained in terms of both strength and failure modes.

Antimicrobic susceptibility and plasmid profile analysis as identity tests for multiple blood isolates of coagulase-negative staphylococci

We compared a disk diffusion antimicrobic susceptibility panel with plasmid DNA profiles as tests for identity of 106 isolates of coagulase-negative staphylococci cultured from the blood of 45 patients on multiple occasions. The antimicrobic panel included penicillin, oxacillin, clindamycin, trimethoprim-sulfamethoxazole, chloramphenicol, tetracycline, tobramycin, kanamycin, and gentamicin. Nineteen patterns of antimicrobic susceptibility were found. The most common pattern was present in 25% of the isolates, and at least one isolate from 31% of the patients had this pattern. Forty-seven distinct plasmid DNA profiles were found. The most common plasmid profile was present in 8.5% of the isolates, and at least one isolate from 15% of the patients had this profile. Twenty-eight patients had multiple isolates that were identical by plasmid profile analysis. Twenty-seven (96%) of these patients had isolates that were also identical by antimicrobic susceptibility. Nineteen patients had multiple isolates that were different by plasmid profile analysis. In 18 (95%) of these patients, the isolates were also different by antimicrobic susceptibility. Although plasmid DNA profile analysis is a more discriminating tool, these data confirm that a selected disk diffusion antimicrobic susceptibility panel may be used to screen multiple blood isolates of coagulase-negative staphylococci for identity or differences.

Cycle Ergometer Tests in Children With Cystic Fibrosis:Reliability and Feasibility

The aim of this study was to assess the reliability and feasibility of cycle ergometer tests in young children with cystic fibrosis (CF). Children with CF aged 6-11 years and with stable lung disease performed two cycle ergometry tests (intermittent sprint and continuous incremental) on two occasions 1 week apart. Reliability was assessed using repeated-measures ANOVA. Bias was considered to be significant at P?

Vision Modulates Corticospinal Suppression in a Functionally Specific Manner during Movement of the Opposite Limb

The effect of vision on the excitability of corticospinal projections to the flexor carpi radialis (FCR) and extensor carpi radialis (ECR) muscles of right human forearm was investigated before and during discrete movement of the opposite limb. An external force opposed the initial phase of the movement (wrist flexion) and assisted the reverse phase, so that recruitment of the wrist extensors was minimized. Three conditions were used as follows: viewing the inactive right limb (Vision), viewing the mirror image of the moving left limb (Mirror), and with vision of the right limb occluded (No Vision). Transcranial magnetic stimulation was delivered to the left motor cortex: before, at the onset of, or during the left limb movement to obtain motor evoked potentials (MEPs) in the muscles of the right forearm. At and following movement onset, MEPs obtained in the right FCR were smaller in the Vision condition than in the Mirror and No Vision conditions. A distinct pattern of variation was obtained for the ECR. In all conditions, MEPs in this muscle were elevated upon or following movement of the opposite limb. An additional analysis of ipsilateral silent periods indicated that interhemispheric inhibition plays a role in mediating these effects. Activity-dependent changes in corticospinal output to a resting limb during discrete actions of the opposite limb are thus directly contingent upon where one looks. Furthermore, the extent to which vision exerts an influence upon projections to specific muscles varies in accordance with the functional contribution of their homologs to the intended action.